• Journal of Environmental Science International
• /
• v.33 no.7
• /
• pp.511-522
• /
• 2024

The optimal yield is defined as the amount of groundwater that maintains a dynamic equilibrium state of the groundwater system over a long period. We examined the current problems, improvements, and methods for estimating the optimal groundwater yield in Korea, considering sustainable groundwater development. The optimal yield for individual wells and the sustainable yield for the entire groundwater basin were reviewed. Generally, the optimal yield for individual wells can be determined using long-term pumping and step drawdown tests. The optimal yield can be determined by groundwater quantity and quality, economic, and water use rights factors. The optimal yield of individual wells in the groundwater basin must be determined within the total sustainable amount of the entire groundwater basin, such that the optimal yield of a new well must be less than the remaining total sustainable amount, exempting the total optimal yield of the existing wells. Therefore, the optimal yield may be determined based on the estimated optimal yield at least twice per year. In addition, if groundwater level and pumping quantity data for at least one year are available, it may be effective to use the Hill, Harding, and zero groundwater-level change methods to re-estimate the optimal yield.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.205-211
• /
• 2007

A novel envelope extraction algorithm for speech processor of cochlear implants, called adaptation algorithm, was developed which is based on a adaptation effect of the inner hair cell(IHC)/auditory nerve(AN) synapse. We achieved acoustic simulation and hearing experiments with 12 normal hearing persons to compare this adaptation algorithm with existent standard envelope extraction method. The results shows that speech processing strategy using adaptation algorithm showed significant improvements in speech recognition rate under most channel/noise condition, compared to conventional strategy We verified that the proposed adaptation algorithm may yield better speech perception under considerable amount of noise, compared to the conventional speech processing strategy.

• The KIPS Transactions:PartB
• /
• v.10B no.6
• /
• pp.593-598
• /
• 2003

Machine learning organizes knowledge for efficient and accurate reuse. This paper is concerned with methods of concept learning from examples, which glean knowledge from a training set of preclassified ‘objects’. Ideally, training facilitates classification of novel, previously unseen objects. However, every learning system relies on processing and representation assumptions that may be detrimental under certain circumstances. We explore the biases of a well-known learning system, ID3, review improvements, and introduce some improvements of our own, each designed to yield accurate and pedagogically sound classification.

• Korean Journal of Radiology
• /
• v.23 no.12
• /
• pp.1290-1300
• /
• 2022

Objective: "Diagnostic yield," also referred to as the detection rate, is a parameter positioned between diagnostic accuracy and diagnosis-related patient outcomes in research studies that assess diagnostic tests. Unfamiliarity with the term may lead to incorrect usage and delivery of information. Herein, we evaluate the level of proper use of the term "diagnostic yield" and its related parameters in articles published in Radiology and Korean Journal of Radiology (KJR). Materials and Methods: Potentially relevant articles published since 2012 in these journals were identified using MEDLINE and PubMed Central databases. The initial search yielded 239 articles. We evaluated whether the correct definition and study setting of "diagnostic yield" or "detection rate" were used and whether the articles also reported companion parameters for false-positive results. We calculated the proportion of articles that correctly used these parameters and evaluated whether the proportion increased with time (2012-2016 vs. 2017-2022). Results: Among 39 eligible articles (19 from Radiology and 20 from KJR), 17 (43.6%; 11 from Radiology and 6 from KJR) correctly defined "diagnostic yield" or "detection rate." The remaining 22 articles used "diagnostic yield" or "detection rate" with incorrect meanings such as "diagnostic performance" or "sensitivity." The proportion of correctly used diagnostic terms was higher in the studies published in Radiology than in those published in KJR (57.9% vs. 30.0%). The proportion improved with time in Radiology (33.3% vs. 80.0%), whereas no improvement was observed in KJR over time (33.3% vs. 27.3%). The proportion of studies reporting companion parameters was similar between journals (72.7% vs. 66.7%), and no considerable improvement was observed over time. Conclusion: Overall, a minority of articles accurately used "diagnostic yield" or "detection rate." Incorrect usage of the terms was more frequent without improvement over time in KJR than in Radiology. Therefore, improvements are required in the use and reporting of these parameters.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.165-172
• /
• 2005

In MEMS (Micro-Electro-Mechanical System), packaging induced stress or stress induced structure deformation becomes increasing concerns since it directly affects the performance of the device. In the decoupled vibratory MEMS gyroscope, the main factor that determines the yield rate is the frequency difference between the sensing and driving modes. The gyroscope, packaged using the anodic bonding at the wafer level and EMC (epoxy molding compound) molding, has a deformation of MEMS structure caused by thermal expansion mismatch. This effect results in large distribution in the frequency difference, and thereby a lower yield rate. To improve the yield rate we propose a packaged SiOG (Silicon On Glass) process technology. It uses a silicon wafer and two glass wafers to minimize the wafer warpage. Thus the warpage of the wafer is greatly reduced and the frequency difference is more uniformly distributed. In addition. in order to increase robustness of the structure against deformation caused by EMC molding, a 'crab-leg' type spring is replaced with a semi-folded spring. The results show that the frequency shift is greatly reduced after applying the semi-folded spring. Therefore we can achieve a more robust vibratory MEMS gyroscope with a higher yield rate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.78-89
• /
• 1993

A new theory based on the modified momentum and energy conservation has been proposed in order to overcome the drawbacks included in previous theories which are used for the determination of dynamic yield stresses and the investigation of dynamic behavior of metals. Then the improvements suggested by the new theory have been manifested through the analysis of the error included in the measurement of deformed length and through the comparison between the new theory, existing theories, and experimental results performed by previous workers. Meanwhile rod impact test has been performed which uses a compressed- air system for the acceleration of flat-ended cylindrical free-cutting brass rods. From the geomtrical measurements of deformed length, the dynamic yield stress of free-cutting brass has determined.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.43-47
• /
• 2001

Effect of coupling agent on the mechanical properties of PP/GF blend was investigated. The flexural modulus, Izod impact strength, elongation at yield and tensile strength were improved with using coupling agent. Mopological studies revealed that PP and GF were incompatible and addition of coupling agent was very effective to enhance the compatibility, result in mechanical properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.1057-1068
• /
• 2014

The major goals of the poultry industry are to increase the carcass yield and to reduce carcass fatness, mainly the abdominal fat pad. The increase in poultry meat consumption has guided the selection process toward fast-growing broilers with a reduced feed conversion ratio. Intensive selection has led to great improvements in economic traits such as body weight gain, feed efficiency, and breast yield to meet the demands of consumers, but modern commercial chickens exhibit excessive fat accumulation in the abdomen area. However, dietary composition and feeding strategies may offer practical and efficient solutions for reducing body fat deposition in modern poultry strains. Thus, the regulation of lipid metabolism to reduce the abdominal fat content based on dietary composition and feeding strategy, as well as elucidating their effects on the key enzymes associated with lipid metabolism, could facilitate the production of lean meat and help to understand the fat-lowering effects of diet and different feeding strategies.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.52-57
• /
• 2009

Soda and kraft pulping experiments were carried out in order to investigate the pulping characteristics of bamboo grown in Vietnam. The merit of kraft pulping was not observed for bamboo pulping from the viewpoint of delignification and screened pulp yield. The improvements of delignification during soda and kraft pulping of bamboo were observed by the addition of AQ. The bamboo pulp leaded the bulkier structure than those made from SwBKP and HwBKP. The average fiber length was 1.62mm which is shorter than those of SwBKP, but longer than those of HwBKP. It was found that the physical properties of bamboo pulp sheet could be varied by the pulping method, cooking condition, AQ addition, bleaching and refining etc.

• International Journal of Quality Innovation
• /
• v.10 no.1
• /
• pp.1-23
• /
• 2009

Face the process yield rate improvements of motherboard, although general enterprises finish deployment goal of each functions by overall quality managements, through quality improvement methods, industry engineering methods, plan-do-check-act (PDCA) methods and other improvement solutions, but it is only can be improved partially and unable to enhance the yield rate of product to the target. It only can takes one step ahead to enhance the process yield rate of motherboard with six sigma ($6{\sigma}$) overall DMAIC process and tactics. This research aimed to use six sigma quality improvement tactics by DMAIC systematic procedure and tactics, and find the key factors that effect to the process yield rate of surface mount technology. It also identified the keys input and process and output index to satisfy customer requirements and internal process index. The results showed that the major effective factors by fishbone and process failure modes and effects analysis (PFMEA). If the index of input and output that can be quantified, the optimum parameter can be found through design of experiment to ensure that the process is stable. If the factor of input and output that cannot be quantified, we found out the effective countermeasure by Mind_Mapping, make sure whole processes can be controlled stably, to reach the high product quality and enhance the customer satisfaction.