• Journal of Mushroom
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2007

A new commercial strain "Hambak" of Grifola frondosa was developed by di-mono crossing between dikaryon of ASI 9031 and monokaryotic strain derived from ASI 9021. It can be cultivated in plastic bottle and bag filled with oak and poplar sawdust substrate which supplemented with 15% rice bran or 10% corn bran. Improvement of cultivation methods was required for shortage of mycelium incubation period and management of humidity in growing room. The optimum temperature of mycelial growth was $25^{\circ}C$ and that of fruiting body development was $15{\sim}18^{\circ}C$. The color of pileus surface was brown and fine pores, whitish to cream-colored, were underside. Primordia formation of Hambak was two days faster than that of Yipsae 1. The yield was $97g/850m{\ell}$ bottle, a bunch of fruiting body was bigger and the quality was better than Yipsae 1.

• The Journal of Internal Korean Medicine
• /
• v.35 no.1
• /
• pp.37-49
• /
• 2014

Objectives & Methods : The objective of this study was to evaluate the single oral dose toxicity of Chongmyung-tang (CMT) in ICR mice. Korean traditional herbal prescription CMT has traditionally been used as a neuroprotective for treatment of learning disability and memory improvement. CMT, lyophilized aqueous extracts (yield=9.7%) were administered to female and male mice with oral dose of 2,000, 1,000 and 500 mg/kg (body weight) according to the recommendation of Korea Food and Drug Administration (KFDA) Guidelines. Animals were monitored for mortality, changes in body weight, clinical signs and gross observation during 14 days after administration upon necropsy; organ weight and histopathology of 14 principle organs were examined. Results : We could not find any CMT extracts treatment related mortalities, clinical signs, changes in body and organ weight, or gross and histopathological observations against 14 principle organs up to 2,000 mg/kg in both female and male mice, except for some accidental sporadic findings which did not show any obvious dose-relations and most of which also demonstrated in both the female and male vehicle control mice in this experiments. Conclusions : Based on the results of this experiment, the 50% lethal dose ($LD_{50}$) and approximate lethal dose (ALD) of CMT extracts after single oral treatment in female and male mice can be considered to be over 2,000 mg/kg, and is likely to be safe in humans.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1113-1122
• /
• 2009

In order to find the way to solve the problem of sewage sludge discharge into the ocean, the sludge solubilization by ultrasonic and the improvement methods of wastewater treatment process were studied. In the membrane bioreactor the sludge retention time was stepwise increased from 5.1 day to 442 days where the biomass average concentration has been increased from $c_B$=3.4 $gTSSL^{-1}$ to $c_B$=14.5 $gTSSL^{-1}$ respectively. At the same time, the biomass yield coefficients were reduced from 0.5-0.7 at SRT=5.1 day to 0.005-0.007 at SRT=442 days which means the reduction of sludge production. Oxygen mass transfer coefficients and ${\alpha}$-factor were investigated with changing stirrer speed to find the relation between the high biomass concentration and aeration efficiency in the propeller loop reactor. As a result of sludge solubilization, the solubilization of sludge by ultrasound was increased with increasing energy input and it led to improved anaerobic digestion rate with more biogas production than that of nonsolubilized sewage sludge.

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.61-66
• /
• 2013

The purpose of this study was to determine the effects of different crude protein levels in the concentrates on carcass and meat quality of Hanwoo steers. A total of thirty 5.3-month-old castrated Hanwoo calves ($135.6{\pm}10.52$ kg) were randomly allocated into either control or treatment group. The animals were separately housed to 5 heads per group. Crude protein levels in concentrates for growing, fattening, and finishing phases were 14, 13, and 11% for control group and 16, 15, and 14% for treatment group respectively. Comparative analysis of carcass characteristics, physico-chemical characteristics, and fatty acid composition in M. longissimus dorsi of Hanwoo steers were carried out. There was no statistical difference in average cold carcass weight between control (411.9 kg) and treatment (419.9 kg) group. Also, dietary crude protein level in concentrates did not affect M. longissimus dorsi area, backfat thickness, and meat yield index. In contrast, the marbling score in treatment group was higher (p<0.05) than the control group. Also, treatment group showed significantly higher (p<0.05) values than control group for CIE L-value, Mono-unsaturated fatty acids and oleic acid composition. Therefore increasing crude protein levels of concentrates in Hanwoo steers during growing and fattening phases might be beneficial for the improvement of meat quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1525-1538
• /
• 2007

Because of the increasing evidence of potential benefits of conjugated linoleic acid (CLA) on human health, there is a need to investigate its status in commercial dairies and develop feeding strategies to enhance the content and supply of CLA in milk and milk products. A two-year experiment was conducted to study the status of milk fat c-9, t-11 CLA on four selected commercial dairy farms in Utah (two) and Idaho (two), USA. Farms A and C grazed cows on pasture and supplemented with 7.0 kg/cow per day of their respective grain mixes during summer, while conserved forage and grain mix was fed during winter. Farm B fed a total mixed diet all year, with 10% of diet dry matter as fresh cut pasture during summer. Farm D had 1/3 of its cows grazed on pasture and supplemented with a total mixed diet during summer, while the rest were fed a total mixed diet. All cows in Farm D were fed a total mixed diet during winter. Farms A, B, C, and D had on average 80, 400, 150, and 500 milking cows, respectively, with Holstein or its crosses as the major breed. On a year-round basis, Farms A and C produced milk with 60% or more milk fat c-9, t-11 CLA and transvaccenic acid (TVA) contents than Farm B. Similarly, Farm D produced 30% or more c-9, t-11 CLA and TVA in milk than Farm B. Milk fat content of CLA and TVA was 150-200% more during summer compared with winter. Individual cows varied from 0.16 to 2.22% in milk fat c-9, t-11 CLA contents and 89% of the cows had c-9, t-11 CLA contents between 0.3 and 1.0% of milk fat. Individual cow variation was larger on Farms A and C compared with Farm D, with least variation on Farm B. Variation was larger in summer than in winter. The bulk tank milk c-9, t-11 CLA content varied from 0.27 to 1.35% of milk fat. Cows on Farms A and C produced similar or higher amounts of milk fat c-9, t-11 CLA on a daily basis even though their milk yield was lowest among the dairies. Concentration and supplies of c-9, t-11 CLA and TVA were highest from June through September and lowest from February through April, which should be the months for targeting improvement in the content and supply of milk fat c-9, t-11 CLA and TVA.

• Microbiology and Biotechnology Letters
• /
• v.40 no.2
• /
• pp.104-110
• /
• 2012

Glycosynthase is an active site nucleophile mutant enzyme, prepared from glycosidase, which is capable of synthesizing oligosaccharide derivatives without the hydrolysis of the product. Thermoacidophilic ${\alpha}$-glucosidase of Thermoplasma acidophilum (AglA) exhibits a transglycosylating activity yielding various glycosides. AglA was converted to glycosynthase by the substitution of the catalytic nucleophile Asp-408 residue into non-nucleophile glycine in order to increase its ability to synthesize various glycosides by transglycosylation. The glycosynthase mutant was purified by Ni-NTA chromatography and its glycoside-synthesizing activity was measured by using an external nucleophile, sodium formate buffer, providing maltose as a donor and p-nitrophenyl-${\alpha}$-D-glucopyranoside ($pNP{\alpha}G$) as an acceptor, respectively. In addition, $pNP{\alpha}G$ was examined for its feasibility to act as both a donor and an acceptor, and products were compared with those of the wildtype enzyme. The mutant enzyme was found to catalyze the formation of a specific product from $pNP{\alpha}G$ with a yield of 42.5% without further hydrolysis, while the wild-type enzyme produced two $pNP{\alpha}G$ products at low yields. The results demonstrate the possibility of satisfactory yields for the reactions in the presence of small amounts of acceptor, and demonstrate that the high activity of the mutant, at pHs below neutrality, was applicable in the transfer of glucose from the natural donor.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.587-595
• /
• 2000

The most problems of domestic sewage for BNR(Biological Nutrients Removal) process are deficiency of carbon source and low C/N ratio. Primary sludge fermentation is seemed to be one of the best solutions producing biodegradable organic substrates. Soluble organic materials from sludge fermentation are mainly SCFAs(Short-Chain Fatty Acids) with 2~5 carbon atoms. In this research, it was attempted to apply $A_2/O$ process with the side-stream acid fermenter to improve the nutrients removal efficiency. The result showed that proper SCFAs production is about 3.000mg/L with SRT of 4~5 days. SCFAs yield of approximately 0.10~0.16 mg SCFAs(as COD) per mg of primary sludge(as COD) were achieved. The ratio of acetic. propionic. butyric and valerie acid were 1, 0.7, 0.5 and 0.6. Significant improvements of nutrients removal over 70% in BNR process were observed. thus will reduce the demand for chemical dosing to increase nutrients removal efficiency. When the fermentate was entered $A_2/O$ process, the ratio of phosphate release to substrate uptake amounts to $0.34gPO_4-Pg^{-1}COD$.

• Elastomers and Composites
• /
• v.37 no.3
• /
• pp.159-169
• /
• 2002

The improvement of flame retardancy of the foams based on NBR/GTR compounds was conducted by formulating various materials i.e. NBR, GTR, inorganic and phosphorus containing flame retardants, foaming agent, cross-linking agent and activator. The foaming properties, morphology, smoke density and flame retardancy of the specimens were investigated using SEM, LOI tester, smoke density control system and cone calorimeter. The phosphorus containing flame retardant reduces heat release rate, increases the limiting oxygen index and a char formation. The inorganic flame retardant increases the limiting oxygen index and reduces heat release rate with an increased CO yield by char formation, and smoke suppressing effect. The formed char seemed to intercept the oxygen transport and heat transfer into the core area. When the composition ratios of the compounds of NBR/GTR were $100{\sim}80/0{\sim}20 wt.%$, and the ratios of the rubbers/flame retardants were $1/1.55{\sim}3.60 wt.%$, we could developed foams with low heat release rate, high limiting oxygen index($28.0{\sim}39.3$), closed or semi-closed cell of uniformity and reasonable expandability($225{\sim}250 %$).

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.259-268
• /
• 2018

This study was conducted to evaluate the effect of liquid fertilizer containing humic acid and Saccharomyces cerevisiae broth (LHS) on changes of turfgrass growth by investigating visual quality, chlorophyll content, dry weight of clipping, and nutrient content in leaf tissues. Treatments were designed as follows; control fertilizer (CF), HS-1 ($CF+1.0mL\;m^{-2}\;LHS$), HS-2 ($CF+2.0mL\;m^{-2}\;LHS$), and HS-3 ($CF+4.0mL\;m^{-2}\;LHS$). After treatment of LHS on creeping bentgrass, soil pH in the treated plots was decreased than that of CF. As compared to CF, visual quality, chlorophyll content and content of N, P and K were not significantly different in the LHS treatments. However, clipping yield and phosphorus uptake of HS-2 were significantly increased by 22% and 33%, respectively. These results showed that application of LHS improved the phosphorus uptake and growth of creeping bentgrass, which would be an alternative management tool for the cool season turfgrass under stress conditions.