• 제목/요약/키워드: Yellowing

검색결과 260건 처리시간 0.025초

사출성형 조건 변화에 따른 도광판의 황화현산에 관한 연구 (A study on yellowing property of LGP under various injection molding conditions)

  • 이성준;민인기;김종선;이성희;윤경환
    • Design & Manufacturing
    • /
    • 제9권2호
    • /
    • pp.20-24
    • /
    • 2015
  • Recently, the light guide plate (LGP), a component of the BLU, becomes thinner and larger than ever. In industrial field, specialized injection molding technique is applied to mold the ultra-thin LGP such as a ultra-high speed injection molding. Usually very high melt temperature is used for low viscosity. High injection speed and melt temperature lead to yellowing of LGP. In the present paper a series of injection molding experiment was performed under various injection molding conditions. Yellow index, CIE xy, spectral transmittance of sample were measured using the UV-Visible spectrophotometer. Systematic decrease of spectral transmittance in UV-B range was found as the melt temperature was higher. Yellow index and CIE xy were became higher near the gate location in LGP. From the result of analysis of variance, the main factor to affect for yellow index was mold temperature and that for spectral transmittance(at 315 nm) was melt temperature.

  • PDF

Effect of Frit Content in Ag Paste on the Discoloration of Transparent Dielectric in PDP

  • Jeon, Jae-Sam;Kim, Hyung-Sun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1248-1251
    • /
    • 2005
  • In PDP, a transparent dielectric is formed on a front glass substrate so as to cover bus electrodes (Ag). During the fabrication process, sometimes, a transparent dielectric reacts with bus (Ag) electrode in the range of $560-600^{\circ}C$, and the reaction gives the dielectric its yellow coloration, what is called "yellowing phenomena". In this paper, we investigated the reaction between bus electrode and transparent dielectric covered with different frit content in Ag paste.

  • PDF

지하철 고가교 접합강화유리 방음판의 열차진동 및 풍하중에 대한 성능평가 (Performance Evaluation of Laminated-Tempered Glass as a Component of Noise Barrier on Metro Railway Elevated Bridge Against Train Induced Vibration and Wind Load)

  • 김석수;이호범;송재호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권5호
    • /
    • pp.30-41
    • /
    • 2017
  • 소음 저감을 목적으로 설치되는 방음벽은 크게 흡음판과 방음판으로 나뉘며, 일조 및 경관을 저해하는 방음벽의 문제점을 해결하고자 투명 방음벽을 설치하는 것이 일반적 추세이다. 방음벽에 사용되는 투명 방음판의 소재는 여러 가지가 있으나 경우에 따라서는 황변현상과 재질변형 등으로 인해 투명도가 떨어지고 오염이 심해져 오히려 도시미관을 해하기도 한다. 따라서 이러한 단점을 보안하기 위하여 투명 방음판의 재질을 접합강화유리로의 대체가 가능하다. 본 논문은 메트로 지하철 고가교 상에서의 열차 유발진동에 따른 접합강화유리 방음판의 진동 및 풍하중에 의한 안전성을 분석하고, 접합강화유리 시스템 및 재료에 대한 휨능력 성능시험, 압축강도 및 탄성계수 시험, 충격시험 등을 수행하여 접합강화유리의 방음판으로서의 적정성을 평가하는 데 목적이 있다.

유리제 문화재 복원용 광경화성 수지의 물성 연구 및 적용 (The Physical Properties of UV-curable Resin for the Restoration of Glass Cultural Properties and Its Application in Conservation Treatment)

  • 이해순;나아영
    • 박물관보존과학
    • /
    • 제21권
    • /
    • pp.1-16
    • /
    • 2019
  • 본 논문은 유리제 문화재 복원에 안정한 물성을 지닌 복원재료를 선정하기 위한 연구이다. 아크릴계 광경화성수지(FLGPCL04 Clear®)를 기준으로 우레탄계 광경화성수지(SECURE CP-7321®)를 10%씩 가감한 혼합 시편 11종을 제작하고 6종의 물성실험을 실시하였다. 실험결과 굴절률, 비중, 접착력, 황변도의 측정값에 대해서는 11종 혼합재료 모두에 대하여 유사하였으나 표면경도 및 압축강도 측정값에서는 우레탄계 광경화성 수지의 혼합 비율이 10~20% 범위일 때 가장 적합하였다. 즉, 유리제 유물을 복원한 이후의 상태 유지에 가장 효과적이다. 이와 같은 연구결과를 바탕으로 아크릴계와 우레탄계 광경화성 수지를 9:1로 혼합한 재료(AU9010)를 경주 황남대총 북분에서 출토된 유리잔 (황북519)의 보존 처리에 적용하였다.

포장조건에 따른 청매실의 호흡생리 및 선도유지 특성 (Respiratory Characteristics and Quality Attributes of Mature-Green Mume (Prunus mume Sieb. et Zucc) Fruits as Influenced by MAP Conditions)

  • 차환수;홍석인;박정선;박용곤;김관;조재선
    • 한국식품영양과학회지
    • /
    • 제28권6호
    • /
    • pp.1304-1309
    • /
    • 1999
  • The respiratory characteristics and quality attributes of mature green mume fruits as influenced by modified atmosphere packaging(MAP) conditions during storage at 25oC for 8 days were investigated. The quality attributes of mume fruits were evaluated in terms of fresh weight loss, physiological injury and yellowing. The packaging materials used for MAP were low density polyethylene(LDPE) films with various different thicknesses. Yellowing and fresh weight loss of mume fruits were noticeably reduced by the packaging treatments with LDPE A and B. The physiological injury of the fruits during storage was found to be more severe in LDPE C than others. For LDPE A and B, the oxygen and carbon dioxide contents within the packages of Mume fruits maintained at the levels of 2~3% and 7~8%, respectively. With respect to visual quality, MAP prolonged the shelf life of the fruits much longer compared with the unsealed control. From the experimental results, it is suggested that the LDPE films with the gas trans mission rates of about 2,100 O2 ml/m2.day.atm and 6,700 CO2 ml/m2.day.atm would be proper for MAP of mature green mume fruits during storage at ambient temperature.

  • PDF

Insights into the Incidence of Watermelon chlorotic stunt virus Causing Yellowing Disease of Watermelon in Western and Southwestern Regions of Saudi Arabia

  • Ahmad, M.H.;Shakeel, M.T.;Al-Shahwan, I.M.;Al-Saleh, M.A.;Amer, M.A.
    • The Plant Pathology Journal
    • /
    • 제34권5호
    • /
    • pp.426-434
    • /
    • 2018
  • During the spring season of 2014, a total of 148 melon and watermelon leaf samples were collected from symptomatic and asymptomatic plants in the western and southwestern regions of Saudi Arabia and were tested for the presence of Watermelon chlorotic stunt virus (WmCSV) and other suspected cucurbit viruses by double antibody sandwich enzyme-linked immunosorbent assays. Ninety-eight samples were found to be positive for the presence of WmCSV, nine samples were positive for the presence of Cucurbit yellow stunting disorder virus (CYSDV), and 22 showed a mixed infection with both WmCSV and CYSDV. No other cucurbit viruses were detected in any of the samples. Host range experiments revealed that eight out of fourteen tested plant species were susceptible to WmCSV. PCR products of approximately 1.2 kb were obtained after amplification using primers specifically targeting the coat protein region of WmCSV. Positive PCR results were confirmed by dot blot hybridization. Coat protein gene sequences from eleven WmCSV isolates indicated that the highest identity was between the 104WMA-SA isolate from the Wadi Baish location and a previously reported isolate from the AL-Lith location in Saudi Arabia. The lowest identity was observed between the 42WMA-SA isolate and an isolate from Palestine.

버어리종 건조시 급건엽발생방지에 관한 연구 III. 환기조건이 급건엽발생에 미치는 영향 (Studies on the Prevention of Excessive Drying Leaves during Burley Tobacco Curing III. Effect of the Ventilating Conditions on the Occurrence of Excessive Curing Leaves)

  • 배성국
    • 한국작물학회지
    • /
    • 제32권2호
    • /
    • pp.130-136
    • /
    • 1987
  • 공시품종인 Burley 21을 수확한 후 건조하고 무더운 시기에 처리하여 건조하우스의 환기시기, 환기량 및 달줄간격 등의 건조실관리에 따른 급건조방지 방법을 밝히고자 시험한 결과 요약하면 다음과 같다. 1. 건기에는 건조시 시종환기구에서 온도가 낮았고 급건엽발생도 제일 적었다. 2. 급건엽발생시기는 황변말부터 갈변말까지로 이 시기에 탈수를 지연시키는 것이 가장 중요하다. 3. 급건엽발생이 적을수록 품질 및 물리성이 양호하였다. 4. 측면을 1.5m로 충분히 환기시킨 구에서 급건엽발생이 가장 적었다. 5. 달줄간격을 좁힐수록 온도에는 크게 영향을 미치지 않았으나 온도는 높게 유지하여 급건엽발생을 크게 감소시켰다. 6. 급건엽의 내용성분은 충분히 분해가 일어나지 않았다.

  • PDF

큰다닥냉이 어린잎채소의 MA저장 중 OTR 필름 종류가 품질에 미치는 영향 (Effects of OTR Film Type on the Quality of Lepidium sativum L. Baby Leaf Vegetable during MA Storage)

  • 김주영;한수정;최인이;윤재수;문영현;김상민;강호민
    • 생물환경조절학회지
    • /
    • 제27권2호
    • /
    • pp.180-184
    • /
    • 2018
  • 본 연구는 큰다닥냉이 어린잎 채소의 MA저장 중 OTR 필름 종류가 품질에 미치는 영향을 알아보고자 수행하였다. 플라스틱하우스에서 2주간 재배한 초장 10cm 내외의 큰다닥냉이 어린잎를 산소투과도가 1,300cc, 10,000cc, 20,000cc, 40,000cc, 그리고 $80,000cc{\cdot}m^{-2}{\cdot}day^{-1}{\cdot}atm^{-1}$인 OTR필름과 대조구인 미세천공필름($\varnothing$ 0.06cm, $36ea/100cm^2$)을 사용하여 포장하여 $8^{\circ}C$에서 10일간 저장하였다. 저장 종료일 모든 OTR필름 처리구의 생체중 감소율은 0.5%를 보였고, 대조구인 미세천공 필름은 1.3%의 감소를 나타냈다. 포장 내 산소농도는 20,000cc, 40,000cc, 그리고 80,000cc OTR필름 처리구에서 저장중 18%이상의 농도을 유지하였고, 1,300cc OTR필름 처리구는 저장 종료일 11%의 농도로 가장 낮게 유지되었다. 이산화탄소 농도는 1,300cc와 10,000cc OTR필름 처리구에서 각각 4.5%와 3.4%의 수준으로 꾸준히 증가하였고, 다른 OTR필름 처리구는 1% 미만의 농도를 유지하였다. 포장 내 에틸렌 농도는 저장 기간 중 1,300cc OTR 필름 처리구에서 $3-5{\mu}L{\cdot}L^{-1}$로 가장 높게 유지되었다. 1,300cc OTR필름 처리구에서 가장 낮은 이취와 가장 높은 외관상 품질을 보였는데, 대조구를 포함한 다른 처리구들은 황화현상으로 인한 품질저하로 상품성을 상실하였다. 저장 종료일에 조사한 엽록소 함량과 Hue angle값은 1,300cc OTR필름 처리구에서 가장 높았으며, 황색도를 나타내는 $b^*$값은 1,300cc OTR필름 처리구에서 가장 낮았다. 따라서 MA저장 중 황화와 이취 억제효과가 우수한 1,300cc OTR필름이 큰다닥냉이 어린잎 채소의 포장에 적합하다고 판단된다.

가역성이 우수한 도자기 복원용 Urethane resin의 개발 및 물성에 대한 연구 (Study on the Development and Properties of Ceramics Restoration Purpose Urethane resin with Excellent Reversibility)

  • 오승준;박기정;위광철
    • 보존과학회지
    • /
    • 제31권1호
    • /
    • pp.37-46
    • /
    • 2015
  • 현재 토기 및 도자기를 보존처리 할 때 사용되고 있는 접착 복원제의 경우 크게 Epoxy계, Cellulose계, Cyanoacrylate계 등이 사용되고 있으나 재료에 따라 심한 수축으로 인한 재탈락, 황변 현상으로 인한 색상 변화, 사용시 도구와 손에 묻어나오는 불편한 작업성, 비가역성 등 다양한 문제점을 나타내고 있다. 본 연구에서는 도자기 복원용으로 사용되고 있는 Epoxy resin의 황변 현상과 비가역성의 문제점 해결을 목적으로 저황변, 가역성이 우수한 Urethane계 합성수지를 개발하였다. 개발된 Urethane resin의 접착력은 원액 2.07MPa로 기존 재료인 $EPO-TEK301^{(R)}$ 1.21MPa로 1.5배 이상의 우수한 물성을 지니고 있다. 가공성 측정 결과 Urethane resin(in Talc 50wt%)의 마모율이 1.09%로 기존 재료인 Quick $Wood^{(R)}$(1.02%)의 마모율 보다는 다소 높게 측정되었으며, EPO-$TEK301^{(R)}$(0.41%)와 $L30^{(R)}$ (0.39%)보다 는 2배 이상의 마모율을 보이고 있어 기존의 재료보다 쉽게 성형 과정이 이루어질 수 있는 장점을 지니고 있다. Urethane resin의 장점인 가역성 실험은 Acetone, Ethyl Alcohol 침적 후 12시간 경과 후 Urethane resin과 충전제인 Talc가 분말화 현상을 나타내며 100% 용해되었으며, 기존 Epoxy resin의 가역성이 0%인 것에 비해 매우 우수한 가역성을 지니고 있다. 내구성 평가를 위한 자외선 실험 결과 Urethane resin의 원액 기준 ${\Delta}E^*ab$ 색상 변화 값이 자외선 노출 전 후 2.76로 기존의 Epoxy resin보다 약 7~20배 정도 줄어 황변 현상으로 인한 이질감의 문제점을 최소화하였다.

수목 최저 생육온도 이상으로 유지된 조건에서의 한반도 주요 수목 잎의 식물계절학적 반응 (The Phenological Responses of Leaf of Deciduous Woody Species to Base Temperature Maintenance)

  • 홍용식;이승연;이수인;이응필;김의주;박재훈;정헌모;유영한
    • 생태와환경
    • /
    • 제51권4호
    • /
    • pp.259-267
    • /
    • 2018
  • 온도상승에 대한 낙엽성 목본식물종의 식물계절반응을 알아보기 위하여 동일지역에서 채종된 종자를 기반으로 야외(대조구)와 온도가 최저생육온도(약 $4.8^{\circ}C$) 이상으로 유지되는 온실(처리구)에서 우리나라 주요 낙엽수 39종을 재배하며, 잎의 식물계절변화를 1년 동안 관찰하고, 이를 식물의 현재 분포범위와 관련지어 설명하였다. 잎이 돋는 개엽기는 평균적으로 야외에서 5월 1~3일이었고, 온실처리구에서는 12월 13일~1월 7일이었으며, 잎이 지는 낙엽기는 평균적으로 야외에서 10월 11~26일이었고, 온실에서는 10월 30일~11월 13일이었다. 이처럼 온도상승으로 개엽기는 119~140일 빨라졌으며, 낙엽기는 3~32일 늦춰졌다. 그리고 잎의 생육기간은 야외대조구보다 온실에서 평균 148일 증가하였다. 온도상승조건인 온실에서 재배된 신갈나무와 졸참나무는 1년 동안 낙엽기가 없이 생육기만 지속되는 상록성으로 변하였으며, 또한 팥배나무의 개엽기는 야외보다 빨라졌으나 그 폭은 가장 적었고, 낙엽기는 오히려 앞당겨져 생육기간의 증가폭이 가장 적었다. 그러나 온도상승에 대한 낙엽수 잎의 식물계절학적 반응은 식물의 현재 분포범위와는 연관성이 없었다. 이는 낙엽수 잎의 표현형이 과거의 환경보다 현재의 생육조건에 더 민감하게 반응한 것으로 사료된다.