• 복식문화연구
• /
• 제10권4호
• /
• pp.433-440
• /
• 2002

Natural gardenia and Japanese pagoda tree have been known as them of the most widely used yellow vegetable dyes. Cotton and silk fabrics(KS K 0905) were chosen as specimens. Those were dyed with natural gardenia and Japanese pagoda tree. The conditions of dyeing were varied according to the kinds of mordants, using mordants or not and the concentrations of the natural dyes. Sn, Al, Fe and Cu were chosen for the mordants. 5%(owf), 10%(owf), 15%(owf) and 20%(owf) were used as for the concentration of the natural dyes. The color differences were measured by the Spectrometer(UV-VIS-NIR) before and after dyeing. The results are as follows: 1. Deeper colors were proportionately shown up to the concentration of the natural dye. 2. Silk was shown the higher dye affinity than the cotton at the same concentration of the dye. 3. The color difference between the Sn-mordanted specimens and the Al-mordanted specimens were significant. When the concentration of the dye increased, the colors got darker, specially in b* value. 4. The color difference between the Fe-mordanted specimens and the Cu-mordanted specimens were significant in L* value and b* value. 5. The deeper or lighter yellow were controllable under the concentration of the natural dye and the mordants. 6. The most effective and the economic concentration of the natural dye was 10% owf through the experiments.

• 한국가구학회지
• /
• 제24권4호
• /
• pp.408-415
• /
• 2013

In order to evaluate a feasibility of industrial art use of veneer such as cylindrical laminated veneer lumber, the veneers of 4 species of Korean pine, radiata pine, yellow poplar and Japanese cypress were natural dye-colored and clear finished. Natural dyes were red color originated from sappanwood, blue color from polygonum indigo, and yellow color from Amur cork tree and gardenia. the clear coats of crack seal clear and UV protection oil were applied on the dyed veneer. The dyeing and finishing characteristics through fading test were summarized as follows; In non-dyed and non-finished Korean pine veneer, lightness was decreased and yellow and red hues increased after fading test. In natural dyed- and finished-veneer, color difference of gardenia-mixed Amur cork tree was generally highest, and that of polygonum indigo was lowest. Compared to non-treatment of veneers of Korean pine and yellow poplar, color difference decreasing effect by finishing was shown in crack seal clear and UV protection oil. In addition, UV protection oil was more favorable than crack seal clear with more decreased color difference. In result, maximum values of color difference after fading for 8 days were recorded about 16 to 20, which are remarked 'very much' of 12.1 or more when reviewing with 'National bureau of standards unit in USA'.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• Journal of Forest and Environmental Science
• /
• 제35권2호
• /
• pp.115-120
• /
• 2019

There are many countries having a long history of exotic tree introduction from different countries and several countries including New Zealand, Brazil and Hungary have successfully introduced exotic trees. Korea's tree breeding program for introduction of exotic tree was originally started from 1924. Records reveal that hundreds of tree species were introduced from many countries and tested their germination and viability. About 415 introductions were eliminated since they had been introduced and tested. Subsequently, seven exotic trees that proved successful in trials and plantations have planted for afforestation. Simultaneously, several promising exotic trees are still under the test. In this paper, we will succinctly review and evaluate their comparative growth performance of the exotic trees in the plantation programs of the country to coping with climate change.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.706-710
• /
• 2010

Understanding of chemical composition and energy contents in tree is important to develope strategies of renewable energy policy to cope with climate change. Residual biomass as renewable energy source was evaluated and focused on the bark-containing branches. Chemical analysis studies were conducted for different part of yellow poplar (Liriodendron tulipifera), which were partitioned to inner bark, outer bark, small branches, medium branches, big branches and trunk. The variations in hydrophobic extractives, hydrophilic extractives, lignin, carbohydrate compositions, energy contents (higher heating value) and the ash content were determined. The inner and outer bark had higher ash content, hydrophobic and hydrophilic extractives content, and higher energy content than those of tree trunk. Polysaccharides content in inner and outer bark was quite lower than those of stem or branches. Based on the energy content of residual biomass, replacement of fossil fuel and greenhouse gas emission abatement were calculated.

• 한국염색가공학회지
• /
• 제11권1호
• /
• pp.9-15
• /
• 1999

Using water and methanol, the colorant components were extracted from the heartwood of amor cork tree which is known as the oldest natural yellow dye. The dyeabilities of the colorant on cotton and the fastness of cotton fabrics dyed with amur cork tree extracts were investigated. According to the dye uptake and mordant concentration, antibacterial activities and deodorization properties of dyed fabrics were also investigated. As a results, K/S values of dyed fabrics were increased with concentrations of mordants and amur cork tree extracts. Washing fastness of dyed fabrics was very low, light fastness was fair and the other fastness were good. Deodorization rates of dyed fabrics were increased in proportion to concentrations of amur cork tree extracts. The reduction rates of bacteria measured by Bioassay tests were also increased in proportion to concentrations of mordants and amur cork tree extracts.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.276-283
• /
• 2017

The aim of this study is to develop an effective dyeing process for black color on the silk fabrics, using natural Indigo, Madder, Amur cork tree, Alder, Logwood, and Gallnut. All natural dye materials were water-extracted, concentrated, and freeze-dried. Seven different processes were carried out and the color differences(${\Delta}E$) of black color with each process from the chemical black dyed fabric were compared. The light, washing, and rubbing fastness were evaluated. The black dyeing of the silk fabrics was well carried and excellent black color was obtained in every methods. The profound black color could be obtained by the subtractive mixture of the three primary colors of red, yellow, and blue in the order of indigo(blue) - amur cork tree(yellow) - madder or lac(red). Black color was efficiently obtained by iron mordant when logwood or alder fruit was used. The color difference(${\Delta}E$) from the black color with chemical dyestuff was the lowest in the indigo - amur cork tree - lac - iron method. Light fastness and washing fastness were excellent in all dyeing processes, showing grade 5. The fastness to rubbing was excellent as shown grade 5 in the dry samples of logwood - iron process and alder fruit - iron process.

• 패션비즈니스
• /
• 제20권5호
• /
• pp.76-86
• /
• 2016

In this research, the dyeing properies of Amur cork tree on sheep leathers were evaluated. The proper dyeing conditions were identified with K/S values depending on the colorant concentration, dyeing time, dyeing temperature and dye bath pH. For the proper conditions, the changes of color for different mordants(Al, Cu and Fe) were observed as $L^*a^*b^*$ coordinates and H V/C values. The color fastnesses were also examined, and the antimicrobial properties were examined. The results were as follows: For the sheep leather, the optimized dyeing conditions were 300% o.w.f., 40 min., $40^{\circ}C$, and pH 5. The leather color was yellow in the dyeing and mordanting. Although the $L^*a^*b^*$ changed with the mordants and mordanting methods, the overall hue was yellow. The colorfastness to light was reduced compared to original(untreated) sheep leather. The rubbing fastness was generallry satisfactory as 4-5 rating. The dry-cleaning fastness(stain) of leathers were generally at the 4-5 level, but dry-cleaning fastness(fade) was a little reduced compared to original sheep leather. The dyed and pre-mordanted and dyed sheep leather showed excellent antimicrobial properties.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2001

Amur cork tree is natural basic and yellow dye largely used for dyeing on cotton. The most effective solvent for extract of berberine from amur cork tree was methanol. The dyeabilities of the colorant on cotton and the fastness of cotton fabrics dyed with amur cork tree extract were investigated. And according to the concentration, temperature and time of pre-treatment, K/S values, wash fastness and Hand Value of cotton fabrics dyed with amur cork tree extract were investigated. As a results, K/S values of dyed cotton fabrics were increased by Pre-treatment with chinese gallotannin and the optimum condition of chinese gallotannin treatment was 15%owf concentration at $60^\circ{C}$, 30min. The wash fastness was enhanced to 3.5 grades. There was no degradations of Hand Value of cotton fabrics treated with chinese gallotannin.

• 감성과학
• /
• 제21권1호
• /
• pp.143-154
• /
• 2018

본 연구는 친환경적이고 감성적인 패션상품의 색채기획을 위한 자료를 제공하고자 수행되었다. 쪽과 괴화로 복합염색 후 무매염 견직물과 4종의 매염제(Al, Cu, Fe, Zn)를 처리한 견직물에 대하여 색채특성을 측정하였다. 또한 복합염색 후 매염처리된 연두색 견직물에 대하여 여대생을 대상으로 색채감성과 색채 선호도를 조사하였으며, 색채특성과 색채감성이 색채 선호도에 미치는 영향을 분석하였다. 쪽/괴화로 복합염색된(무매염) 견직물은 선 염색한 쪽 농도가 $10g/{\ell}$이면 녹색, 쪽 $20g/{\ell}$을 사용하면 청록색을 나타내었으며, 4종의 매염제를 사용하여 처리시 거의 모든 경우 연두색을 나타내었다. 연두색을 나타내는 복합염색된 견직물 10종의 색채감성을 요인분석한 결과, 유쾌성, 품위성, 편안성 요인으로 분류되었으며, 이러한 색채감성은 쪽 농도와 매염제의 종류에 따라 대부분 유의한 차이를 보였다. 또한 복합염색된 연두색 견직물의 색채특성과 색채감성요인 간에는 대부분 유의한 상관성을 보여, $L^*$값, $b^*$값, $C^*$값이 크고 $a^*$값이 작을수록 유쾌성과 편안성 감성을 더 강하게 느끼며, $L^*$값이 작고 $a^*$값이 클수록 품위성 감성을 더욱 느끼는 것으로 나타났다. 따라서 쪽과 괴화로 복합염색하고 매염처리한 연두색 견직물의 색채감성요인을 예측변수로 활용할 수 있는 색채 선호도 예측 회귀식이 제안되었다.