• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.388-394
• /
• 2008

For purpose of anti-static film remaining unchanged in the condition of $160^{\circ}C$, organic solvent, acid and base solution $0.01\sim0.03{\mu}m$ particles of Sb doped tin oxide(ATO) were grafted by 3-Glycidyloxypropyltrimethoxysilane(GPTS) for improving interfere bonding force between ATO and epoxy resin. The particles were dispersed in 2-methoxyethanol with YD-I28(Bisphenol A type epoxy resin, Kukdo chemical) and 1-imidazole as hardener. The anti-static solutions were coated on PI film as thickness of $0.1{\mu}m$. Surface resistivity of anti-static film containing conductive polymer became $10^{12}\Omega/\Box$ after 32 hours in $160^{\circ}C$. The surface resistivity of ATO grafted by GPTS / Epoxy coating layer remained as $10^{7.6}\Omega/\Box$ in $160^{\circ}C$ for 7 days. ATO grafted by GPTS / Epoxy coating layer coated on PI film was dipped in acetone for 7 days. The surface resistivity remained unchanged as $10^{7.6}\Omega/\Box$. The anti-static layer dipped in water solutions containing each KOH 10 wt % and $H_2SO_4$ 2 wt% was ultra-sonicated for 10 minutes per once until 30th. The surface resistance of anti-static layer containing ATO grafted by GPTS remained unchanged.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.117-126
• /
• 2011

The buckling assessment of plate panels described in common structural rules (CSR) is to be determined according to the buckling utilization factor with hull girder stresses calculated on net hull girder sectional properties. As the thickness requirement for the buckling assessment of plate panels is not explicitly given in CSR, a lot of time is spent to find the proper thickness of plate panels until reaching to an allowable buckling utilization factor. In this study, in order to reduce time and cost, the thickness requirement of plate panels satisfying buckling assessment was derived. The structural design system included with the thickness requirement for buckling assessment was developed. The system is called as Oil-tanker Automated Structural Investigation System (OASIS). The design result of longitudinal strength members using OASIS was verified by Nauticus Hull which is the rule scantling software of DNV. Finally, optimum design of a double hull tanker for the minimum weight using OASIS was presented.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.243-249
• /
• 2008

In the previous study, 141 $BC_3F_2$ lines from a cross between the Oryza sativa cv. Milyang 23 and O. glaberrima were used to identify favorable wild QTL alleles for yield component traits. In this study, we carried out QTL analysis of four grain morphology as well as four yield component traits using 141 $BC_3F_5$ lines from the same cross and compared QTLs detected in two different generations. The mean number of O. glaberrima segments in the 141 $BC_3F_5$ lines ranged from 1 to 13 with 2.69 and 5.71 of the average means of homozygous and heterozygous segments, respectively. There was a three-fold difference in the number of QTLs detected for four traits commonly evaluated in two generations (seven QTLs in the $BC_3F_5$ vs 21 in the $BC_3F_2$ population). The percentages of the phenotypic variance explained by QTLs in the BC3F5 population were similar to or less than those in the $BC_3F_2$ population. This is probably due to the difference in the genetic composition of two populations and the environmental effects. The locations of the QTLs commonly detected in both generations were in good agreement except for one QTL for spikelets per panicle. The yield QTL, yd3 was colocalized with the spikelets per panicle, spp3. Yield increase at this locus is due to the increase in spikelets per panicle, because both traits were associated with increase in spikelets per panicle and yield due to the presence of an O. glaberrima allele. Clusters of QTLs for grain morphology traits were observed in two chromosome regions. One cluster harboring five QTLs near SSR markers RM106 and RM263 was detected on chromosome 2. This population would serve as a foundation for development of the introgression line population from a cross between Milyang 23 and O. glaberrima.

• Journal of Adhesion and Interface
• /
• v.15 no.2
• /
• pp.69-76
• /
• 2014

Two kinds of epoxy-functionalized alkoxysilane (EAS) compounds (EAS-MS and EAS-ES) were successfully synthesized through the reaction between epoxy resin (YD-128) and aminopropyl trimethoxysilane (APTMS) or aminopropyl triethoxysilane (APTES). By the hydrolysis-polycondensation reaction of EAS compounds with 3-Glycidyloxypropyl trimethoxysilane (GPTMS) and Tetraethyl orthosilicate (TEOS), silica/epoxy nanohybrids could be prepared at various compositions of EAS to GPTMS/TEOS. Prepared nanohybrids were yellow transparent and miscible with various organic solvents. By the reaction silica/epoxy nanohybrids with curing agents (TETA or acrylic acid), cured hybrids films could be obtained. These cured films showed higher thermal stability and mechanical property compared to cured neat epoxy resin. TEM and AFM images showed formation of nano-sized silica nanoparticles within cured hybrid films.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.1
• /
• pp.10-16
• /
• 2019

BACKGROUND: Coal ashes generated from thermal power plants have been known as beneficial materials for agricultural use because of their nutrient elements. However, there is limitation to recycle them due to their alkalinity. The objective of this study was to evaluate the effectiveness or safety of the coal ashes for their heavy metals on agricultural recycling when adjusted to pH of 5 with sulfuric acid. METHODS AND RESULTS: Concentration of hydrogen which is needed to adjust pH of coal ash was estimated by using a buffering curve and then the amount of sulfuric acid was changed by the estimation before incubation. Each of fly ash (FA) and bottom ash (BA) was collected from both thermal plants of Yeongdong (YD) and Yeongheung (YH). The pH values of coal ashes increased to 4.76 (from 4.34) after incubation with sulfuric acid for 56 days, closer to the targeted pH. Coal ashes also increased the contents of available phosphorus by 2-fold (165 mg/kg) and 11-fold (1,137 mg/kg) for YDBA and YDFA, respectively, compared to the control. CONCLUSION: The utilization of coal ash with its acidity regulation would be very beneficial to agriculture sector and further suggest promising environmental safety against heavy metals.

• Journal of Korean Academy of Dental Administration
• /
• v.6 no.1
• /
• pp.11-18
• /
• 2018

The aim of this study was to evaluate the competency of the Easyperio test, a genetic test method based on real time PCR for the detection of bacteria that cause dental caries and periodontal disease. To verify the validity of this text, various dental health evaluations were administered to 33 boys between the ages of 12 to 14, as this age group commonly experiences dental caries. These evaluations included a dental caries experience survey, a first molar health evaluation, the Dentocult Streptococcus mutans (SM) strip mutans, the Dentocult Lactobacillus spp (LB) test, and the Easyperio test. The correlation coefficients between the level of the Dentocult SM strip mutans and the dental caries experience were DT (R=0.570, p=0.001), DMFT (R=0.376, p=0.031), and first molar health (R=-0.395, p=0.023). The correlation coefficients between the amount of SM in the Easyperio test and dental caries experience were DT (R=0.528, p=0.002), DMFT (R=0.369, p=0.035), and first molar health (R=-0.426, p=0.013). The correlation coefficients between the level of the dentocult SM strip mutans and the SM amounts of the Easyperio test were S.mi (R=0.564 p=0.001) and S.mu (R=0.621, p=0.002). The correlation coefficients between the level of the Dentocult LB test and the SM amount of Easyperio test was S.mi (R=0.495, p=0.003). In conclusion, Easyperio test may be an easy and effective method for the differentiation and diagnosis of dental caries through quantitative and qualitative analysis of oral bacteria.

• Korean Journal of Pharmacognosy
• /
• v.54 no.1
• /
• pp.27-37
• /
• 2023

This research was conducted to investigate the comprehensive effects of methanol extract of Coptidis rhizoma (MECR) against oral pathogen. We studied the antibacterial, anti-biofilm, anti-gingipain and anti-inflammatory activity of MECR. The minimum bactericidal concentration (MBC) of MECR was 100 ㎍/mL against several oral pathogens. The formation of biofilm of Streptococcus mutans was reduced to 8.93~24.12% in the presence of 25 ㎍/mL of MECR. The gingipain activity of Porphyromonas gingivalis were reduced to 3.91~6.23% in case of Kgp and 5.73~7.78% in case of Rgp in the presence of 10 mg/mL of MECR. The expression of fadA mRNA, virulence factor of Fusobacterium nucleatum (F. nucleatum) was 3 folds decreased in the presence of 25 ㎍/mL of MECR. In case of YD-38 cells challenged with F. nucleatum, RQ values of IL-8 and IL-6 were reduced about 12 folds and 5.45 folds in the presence of 2 ㎍/mL of MECR. In case of RAW 264.7 murine cell challenged with F. nucleatum, RQ values of IL-1β and IL-6 were 2.52 folds and 2.55 folds reduced in the presences of 2 ㎍/mL of MECR. Conclusively, MECR showed potent antibacterial and anti-inflammatory effects against oral pathogenic bacteria.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.4
• /
• pp.259-266
• /
• 2015

Cervical cancer is the third most common cancer among women worldwide. Cervical cancer is significantly associated with human papillomavirus (HPV) infection. The prevalence of HPV infection is influenced by geography, immune status, sexual history and genetic factors. For example, geographically, HPV prevalence varies from 1.5% to 39%. However, little is known about the relationship between HPV prevalence and age. An analysis of HPV prevalence by age will help determine when high-risk groups are exposed to HPV. Such an analysis could also demonstrate a correlation between specific HPV genotypes and age. In addition, the analysis might clarify the optimum age for using vaccines. In this study, HPV prevalence and genotype distribution among Korean and Chinese women are analyzed by age. The REBA HPV-ID$^{(R)}$ assay (YD diagnostics, Yong-in, Republic of Korea) was used for detecting HPV genotypes in uterine cervical liquid-based cytology samples from 533 women from Korea and 324 from East China (Western Shandong province. Women with severe dysplasia such as SCC (Squamous cell carcinoma) and HSIL (High-grade squamous intraepithelial lesion) groups were primarily in their 40s and 50s, whereas women with mild and moderate dysplasia (ASCUS and LSIL groups) were primarily in their 30s and 40s. Women with HPV genotype 16 and 18 infections were primarily in their 40s. The results suggest that HPV infection is associated with certain age groups in the Korean population.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.76-82
• /
• 2018

This study evaluated the physicochemical properties of a novel black bean milk yogurt made by lactic acid producing bacteria isolated from vinegar (Bacillus acidiproducens, BA) and kimchi (Lactobacillus plantarum, LP). Commercially available Lactobacilli mixture for yogurt (YF) were regarded as control bacteria. To investigate optimal conditions to make black bean yogurt, different types of bacteria (BA and LP) and dilution ratios of black bean milk and water (1:1, 1:1.5, and 1:2) were used. Titratable acidity and pH were affected by these dilution ratios, but not by the different types of Lactobacilli used. Titratable acidity and pH were lowest in the 1:1 diluted sample. The visible cell count, sugar content, and viscosity were significantly higher in the sample containing the black bean milk: water ratio of 1:1 than the rest of the samples. In the sensory test, black bean yogurt made with BA showed a higher overall acceptability score, similar to yogurt made with YF. In conclusion, black bean yogurt made by fermentation with BA and with 1:1 black bean milk:water dilution ratio was better than ones made with LP and at other dilution ratios.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.990-995
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with ethylene diamine(EDA) and hexamethylene diamine(HMDA) in a stoichiometrically equivalent ratio. From this work, the effect of linear amine curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure or chain length of curing agents. In contrast, the results show that the DGEBA/EDA system having the two carbons had higher values in the thermal stability, maximum conversion of epoxide, density, glass transition temperature, tensile modulus, flexural strength, and flexural modulus than the DGEBA/HMDA system having the six carbons, whereas the DGEBA/EDA cure system had relatively low values in the shrinkage(%), thermal expansion coefficient, tensile strength, and had similar values in the maximum exothermic temperature, and conversion of epoxide compared to the DGEBA/HMDA cure system. This findings indicate that packing ability in the HMDA structure affects the thermal and mechanical properties.