• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.554-560
• /
• 2020

In the manufacturing process of flat panel displays, a high-precision planar motion stage is used to position a specimen. Stages of this type typically use frictionless linear motors and air bearings, and laser interferometers. Real-time dynamic correction of the yaw motion error is very important because the inevitable yaw motion error of the stage means a change in the specimen orientation. Gantry control is generally used to compensate for yaw motion errors. Flexure units that allow rotational motion are applied to the stage to apply this method to a stage using an air-bearing guide. This paper proposes a method to improve the constant speed motion performance of a H-type XY stage equipped with air bearing and flexure units. When applying the gantry control to the stage, including the flexure units, the cause of the mutual ripple generated from the linear motors is analyzed, and adaptive learning control is proposed to compensate for the mutual ripple. A simulation was performed to verify the proposed method. The speed ripple was reduced to approximately the 22 % level. The ripple reduction was verified by simulating the stage state where yaw motion error occurs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.212-219
• /
• 1999

This paper describes the NANDO VDC (Vehicle Dynamics Control) system for the vehicle stability enhancement and consists of the control strategies , computer simulation and tests on the various road surface. This VDC system controls the dynamic vehicle motion in the emergency situation such as the final oversteer/understeer andallows the vehicle to follow the course as desired by the driver. The system is based on an active yaw control and its performance verified by the test is shown. Also the comparison between the MANDO VDC System and a competitor is carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.355-360
• /
• 1991

A method of autopilot gain-scheduling is presented for missiles which have heavy aerodynamic coupling between pitch and yaw channels due to high maneuverability. Pitch and yaw, autopilot are cross-coupled, and their feedback gains are scheduled by total acceleration and bank angle for given Mach number and height. Bank angle information is obtained by using a simple estimator. By computer simulation, it is shown that the proposed method is superior to other existing methods.

• Proceedings of KOSOMES biannual meeting
• /
• 2001.05a
• /
• pp.149-166
• /
• 2001

작은 메타센터높이를 가진 선박이나 고속선 등의 조종성능은 횡동요(roll) 운동이 미치는 영 향에 대해서 고려되어야 할 것이다. 이러한 조종성능의 추정은 surge-sway-yaw 조종운동 방정식에 횡동요 운동을 추가함으로써 가능하게 된다. 본 연구에서는 선박의 4-자유도 운동에 대한 조종성능 추정기법에 대해서 논하였다. 구체적으로 surge-sway-yaw 조종운동방정식에 추가되는 roll 운동항에 대한 새로운 모델을 제안하였으며, 다른 추정결과값과 비교 ·검토하였다. 그 결과, 새로운 모델을 운동방정식에 추가함으로써 만족스러운 조종성능을 추정할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1299-1304
• /
• 2016

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.1
• /
• pp.45-55
• /
• 2013

With the recent advancement of control method and battery technology, the electric vehicle have been researched to replace the conventional vehicle with electric vehicle with the view point of the environmental concerns and energy conservation. An electric vehicle which is equipped with the independent front steering system and in-wheel motors has advantage in terms of control. For example, the different torque which generated by left and right wheels directly can make yaw moment and the independent steering using outer wheel control is able to reduce the sideslip angle. Using of independent steering and driving system, the 4 wheel electric vehicle can improve a performance better than conventional vehicle. In this paper, we consider the method for improving the cornering performance of independent front steering system and in-wheel motor used electric vehicle with the compensated outer wheel angle and direct yaw moment control. Simulation results show that the method can improve the cornering performance of 4 wheel electric vehicle. We also apply the steering motor failure to steer the vehicle turned by the torque difference without steering. This paper describes an independent front steering and driving, consist of three parts; Vehicle Model, Control Algorithm for independent steering and driving and simulation. First, vehicle model is application of TruckSim software for independent front steering and 4 wheel driving. Second, control algorithm describes the reduced sideslip and direct yaw moment method in view of cornering performance. Last is simulation and verification.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.931-942
• /
• 1999

This paper develops a 3 DOF vehicle model which includes lateral, roll and yaw motion to study a 4WS vehicle. The model is used for the simulation of a 4WS vehicle behavior, and to derive a control algorithm for rear wheel steering. This paper uses a feedforward plus feedback control scheme to compute a rear wheel steering angle. The feedforward control scheme for computing the first rear wheel steering angle uses a gain which is acquired by multiplying a proper value on a gain to maintain a zero sideslip angle. The feedback control scheme for computing the second rear wheel steering angle uses fuzzy logic and model following control scheme. A linear 2 DOF model is used as a reference model for model following control, and is derived from the developed 3 DOF model by neglecting sprung mass roll motion. A reference state variable is yaw rate, and is computed using the linear 2 DOF model. J-turn and lane change maneuver simulation are performed to show the effectiveness of the developed control scheme. The simulation results show that the 4WS vehicle with the developed control scheme has much better performance in yaw rate, lateral acceleration, roll angle, and sideslip angle than the 2WS vehicle. Also, the results show that the performance of the developed control is close to the one of an optimal control which assumes all states are perfect.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.199-206
• /
• 2012

Attempt to use as a marker of natural objects directly in the real world, but there is a way to use the accelerometer of the smartphone, to convert the Frontal-View virtual, because it asks only the pitch of the camera, from the side there is a drawback that can not be converted to images. The proposed algorithm, to obtain the rotation matrix of axis 3 pitch, roll, yaw, we set the reference point of the yaw of the target image. Then, to compensate for the rotation matrix to determine Myon'inji any floor, wall, the ceiling of the target image. Finally, to obtain the homography matrix for obtaining the Frontal-View to account for the difference between the gyro sensor coordinate system and image coordinate system, so we can get the Frontal-View from the captured images through the projection transformation was designed. Was tested to convert Frontal-View the picture was taken in an environment smartphone environment surrounding floor, walls and ceiling in order to evaluate the conversion program Frontal-View has been implemented, in this paper, design and The conversion algorithm implementation, it was confirmed that to convert a regular basis Frontal-View footage taken from multiple angles.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.55-63
• /
• 2003

The traffic accident is the prerequisite of the traffic accident reconstruction. In this study, the traffic accident (forward collision) and traffic accident reconstruction (inverse collision) simulations are conducted to improve the quality and accuracy of the traffic accident reconstruction. The vehicle and tire models are used to simulate the trajectories for the post-impact motion of the vehicles after collision. The impact dynamic model applicable to the forward and inverse collision simulations is also provided. The accuracy of impact analysis for the vehicular collision depends on the accuracy of the coefficients of restitution and friction. The neural network is used to estimate these coefficients. The forward and inverse collision simulations for the multi-collisions are conducted. The new method fur the accident reconstruction is proposed to calculate the pre-impact velocities of the vehicles without using the trial and error process which requires the repeated calculations of the initial velocities until the forward collision simulation satisfies with the accident evidences. This method estimates the pre-impact velocities of the vehicles by analyzing the trajectories of the vehicles. The vehicle slides on a road surface not only under the skidding during an emergency braking but also under the steering. A vehicle over steering or cornering with excessive speed loses the traction and leaves tile yaw marks on the road surface. The new critical speed formula based on the vehicle dynamics is proposed to analyze the yaw marks and shows smaller errors than ones of the existing critical speed formula.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.841-847
• /
• 2019

Time series data of 6-component loads were computed for a horizontal axis wind turbine rotor in yawed operating conditions with both rotating and non-rotating coordinate systems fixed at a center of a rotor hub. In this study, a well-known 20 kW class of the NREL Phase VI rotor was used for a model wind turbine, and this paper focuses on the yaw moments and over-turning moments for the operating wind speed range between 6 to 25 m/s. Unsteady blade element momentum theorem was adopted to get the aerodynamic loads acting on the wind turbine rotor. Computed 6-component loads using the developed UBEM code were compared with those using the NREL FAST program. From the computed results, both yaw and over-turning moments would be basic inputs to determine not only the specification of yawing mechanism but also the design condition of foundation.