• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.128-134
• /
• 2012

Purpose: The purpose of this study was to compare the screw joint stability between the CADCAM custom-made implant abutment and the prefabricated implant abutment by measuring the reverse torque value after cyclic loading. Materials and methods: Twelve screw type implants (Implantium, Dentium Co., Seoul, Korea) were embedded in aluminum cylinder with acrylic resin. The implant specimens were equally divided into 3 groups, and connected to the prefabricated titanium abutments (Implantium, Dentium Co., Seoul, Korea), CADCAM custom-made titanium abutments (Myplant, Raphabio Co., Seoul, Korea) and CADCAM custom-made zirconia abutments (Zirconia Myplant, Raphabio Co., Seoul, Korea). The CAD-CAM milled titanium crown (Raphabio Co., Seoul, Korea) was cemented on each implant abutment by resin cement. Before cyclic loading, each abutment screw was tightened to 30 Ncm and the reverse torque value was measured about 30 minutes later. After the crown specimen was subjected to the sinusoidal cyclic loading (30 to 120 N, 500,000 cycles, 2 Hz), postloading reverse torque value was measured and the reverse torque loss ratio was calculated. Kruskal-Wallis test was used for statistical analysis of the reverse torque loss ratio. Results: The CADCAM custom-made titanium abutments presented higher values in reverse torque loss ratio without statistically significant differences than the prefabricated titanium abutments ($P$>.05). Reverse torque loss ratio of the custom-made zirconia abutments was significantly higher compared to that of the prefabricated titanium abutments ($P$=.014). Conclusion: Within the limitation of the present $in-vitro$ study, it was concluded that there was no significant difference in screw joint stability between the CADCAM custom-made titanium abutments and the prefabricated titanium abutments. On the other hand, the CADCAM custom-made zirconia abutments showed lower screw joint stability than prefabricated titanium abutments.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.100-105
• /
• 2005

$Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticles have been prepared by a sol-gel method. The structural and magnetic properties have been investigated by DTA/TGA, XRD, SEM, and $M\ddot{o}ssbauer$ spectroscopy, VSM. $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powder that was annealed at $300^{\circ}C$ has spinel structure and behaved superparamagnetically. The estimated size of superparammagnetic Ni-Zn ferrite nanoparticle is around 10 nm. The hyperfine fields at 13 K for the A and B patterns were found to be 533 and 507 kOe, respectively. The blocking temperature ($T_B$) of superparammagnetic $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle is about 250 K. The magnetic anisotropy constant and relaxation time constant of $Ni_{0.9}Zn_{0.1}Fe_2O_4$ nanoparticle were calculated to be $1.6\times10^6\;ergs/cm^3$ and ${\tau}_0=5.0{\times}10^{-13}$ s, respectively. Also, Temperature increased up to $43^{\circ}C$ within 10 minutes under AC magnetic field of 7 MHz. It is considered that $Ni_{0.9}Zn_{0.1}Fe_2O_4$ powder that was annealed at $300^{\circ}C$ is available for biomedicine application such as hyperthermia, drug delivery system and contrast agents in MRI.

• Clinical and Experimental Reproductive Medicine
• /
• v.40 no.2
• /
• pp.90-94
• /
• 2013

Objective: To evaluate the efficacy of earlier oocyte retrieval in IVF patients with a premature LH surge on hCG day. Methods: One hundred forty IVF patients (164 cycles) with premature LH surge on hCG day were included, retrospectively. We divided them into 2 study groups: LH surge with timed ovum pick-up (OPU) 36 hours after hCG injection (group B, 129 premature cycles), and LH surge with earlier OPU within 36 hours after hCG injection (group C, 35 cycles). Control groups were tubal factor infertility without premature LH surge (group A, 143 cycles). Results: The mean age (year) was statistically higher in group C than in groups A or B ($38.2{\pm}5.4$ vs. $36.2{\pm}4.2$ vs. $36.8{\pm}4.9$, respectively; p=0.012). The serum LH levels (mIU/mL) on hCG day were significantly higher in group B and C than in group A ($22.7{\pm}14.9$ vs. $30.3{\pm}15.9$ vs. $3.2{\pm}2.9$, respectively; p>0.001). Among groups A, B, and C, 4.9%, 31.7%, and 51.4% of the cycles, respectively, had no oocytes, and the overall rates of cycle cancellation (OPU cancellation, no oocyte, or no embryos transferrable) were 15.4%, 65.9%, and 74.3%, respectively. The fertilization rate (%) was significantly higher in group B than in group C ($73.2{\pm}38.9$ vs. $47.8{\pm}42.9$, p=0.024). The clinical pregnancy rate was significantly higher in group C than in groups A and B (44.4% vs. 27.3% vs. 9.1%, respectively, p=0.021). However, the miscarriage rate was also higher in group C than in group B (22% vs. 0%, respectively, p=0.026). Conclusion: Earlier OPU may not be effective in reducing the risk of cycle cancellation in patients with premature LH surge on hCG day. A larger scale study will be required to reveal the effectiveness of earlier ovum retrieval with premature LH surge.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.138-144
• /
• 2015

The purpose of this study was to investigate the differences in health belief related to vaccination among dental hygiene students, identify the factors affecting hepatitis B vaccination, and provide basic data for health education concerning hepatitis B prevention. Hepatitis B vaccination was positively correlated (r=0.179, p=0.003) with seriousness of believing that hepatitis B would affect psychological, physical, and social activities and negative correlation (r=-0.183, p=0.002) was also found between perceived barriers related to hepatitis B. As for the factors affecting hepatitis B vaccination, juniors were 0.39 times (95% confidence interval [CI]=0.21, 0.71) more likely to have it affected than seniors and those who were more serious, and who had greater barriers were more likely to have it affected-1.80 times (95% CI=1.29, 2.52), 0.61 times (95% CI=0.41, 0.90) respectively (p<0.05). It is therefore urgent to develop a program within a curriculum that can begin with freshmen along with specific education with the objective of obliging dental hygiene students to receive hepatitis B vaccination. It is also necessary to provide consecutive sessions of education rather than one-time education and to develop a specific plan for obligatory hepatitis B vaccination through correct and thorough education.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.377-386
• /
• 1994

Purpose: The role of radiotherapy in the management of patients with locoregional recurrent cervix cancer after radical surgery were retrospectively analyzed. Methods and materials: Twenty-eight patients treated with radiotherapy for locoregional recurrence after primary surgery for carcinoma of the cervix between 1989 and 1993 were analyzed. The median follow-up of survivors was 15 months (ranged 7-43 months). Eight patients had their disease confined to the vagina and 19 patients($68\%$) had pelvic mass as part of their locoregional recurrent disease. Within 24 months after the initial surgery, $82\%$ of recurrences manifested themselves. All patients had whole pelvic irradiation with or without intracavitary radiotherapy(ICR). Results: Complete response(CR) was achieved in 18 patients($54\%$). Five of eighteen patients($28\%$) with initial CR developed second locoregional recurrence. Response to radiotherapy correlated strongly with tumor volume, site of recurrence and total radiation dose. The overall 2 year survival rate was $43\%$ and the disease free survival was $31\%$. Survival rate was significantly influenced by the factors of interval from operation to recurrence, size and site of recurrent tumor, radiation dose, response of radiotherapy, lymph node status as initial presentation, The principal cause of death was lung metastasis($36\%$). Conclusion: Radiotherapy is an excellent modality for control of locoregional recurrent cervix cancer. To improve local control and survival rate, whole pelvic external radiotherapy in addition to ICR with more than 75.0Gy at the depth of 1.0cm from vaginal mucosa is needed and frequent follow up and early detection of recurrence is suggested as well.

• Microbiology and Biotechnology Letters
• /
• v.38 no.4
• /
• pp.420-427
• /
• 2010

A process for manufacturing virally-safe bovine amniotic membrane(BAM) has been developed for biological dressing. BAM was harvested from a healthy bovine placenta, and then the epithelium was removed. The remaining stromal layer was consecutively disinfected with 70% ethanol and 0.05% sodium hypochlorite. The stromal layer was incubated in a decellularization solution containing 0.25%(w/v) trypsin to remove the cellular components. The resulting acelluar BAM was lyophilized to preserve its biochemical and structural integrity. The BAM was packed and exposed to 25 kGy of gamma irradiation for sterilization purpose. Histological, electron microscopical, and biochemical observations showed that the acellualr BAM had intact structural integrity of three dimensional collagen fibers and contained several growth factors, accelerating wound healing, such as EGF (Epidermal growth factor), KGF (Keratinocyte growth factor), and FGF (Fibroblast growth factor). Bovine herpes virus (BHV), bovine viral diarrhoea virus (BVDV), bovine parainfluenza virus type 3 (BPIV-3), and bovine parvovirus (BPV) were chosen as the biological indicators for validation of viral safety of the acellular BAM. Samples from relevant stages of the production process were spiked with each virus and subjected to viral inactivation processes. Viruses were recovered from the samples and then titrated immediately. All the viruses tested were completely inactivated to undetectable levels within 1 h of 70% ethanol treatment. Enveloped viruses such as BHV, BVDV, and BPIV-3 were more effectively inactivated than BPV by 0.05% sodium hypochlorite treatment. BHV, BVDV, and BPIV-3 were completely inactivated to undetectable levels by 25 kGy of gamma irradiation. Also BPV was effectively inactivated by 25 kGy of gamma irradiation. The cumulative log reduction factors of BHV, BVDV, BPIV-3, and BPV were ${\geq}$13.30, ${\geq}$14.32, ${\geq}$15.22, and ${\geq}$7.57, respectively. These results indicate that the production process for acelluar BAM has a sufficient virus-reducing capacity to achieve a high margin of the virus safety.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2005

This study was done to evaluate whether there were any differences in microleakage of class V composite restorations according to restoration site and cavity size. Total sixty-four restorations were made in molar teeth using Esthet-X. Small ($2\;{\times}\;2\;{\times}\;1.5\;mm$) and large ($4{\times}2{\times}1.5\;mm$) restorations were made at the buccal/lingual surface and the proximal surface each. After 1,000 times of thermocycling ($5^{\circ}\;-\;55^{\circ}C$), resin replica was made and the percentage of marginal gap to the whole periphery of the restoration was estimated from SEM evaluation. Thermocycled tooth was dye penetrated with $50\%$ silver nitrate solution. After imbedding in an auto-curing resin, it was serially ground with a thickness of 0.25 mm. Volumetric microleakage was estimated after reconstructing three dimensionally. Two-way ANOVA and independent T-test for dye volume, Mann-Whitney U test for the percentage of marginal gap, Spearman's rho test for the relationship between two techniques were used, The results were as follows : 1. The site and size of the restoration affected on the microleakage of restoration. Namely, much more leakage was seen in the proximal and the large restorations rather than the buccal/lingual and the small restorations. 2. Close relationship was found between two techniques (Correlation coefficient = 0.614/ P = 0.000). Within the limits of this study, it was noted that proximal and the large restorations leaked more than buccal/lingual and the small restorations. Therefore, it should be strictly recommended large exposure of margins should be avoided by reducing unnecessary tooth reduction.

• Geophysics and Geophysical Exploration
• /
• v.3 no.1
• /
• pp.1-6
• /
• 2000

The 1 $km^2$ area studied is located in Sukchun-ri, Hwasung-koon, the southern part of Kyeonggi-do. Even though this site has been known as a contaminated area caused by seawater intrusions, geophysical and geochemical surveys have never been carried out at the site to determine the extent of the seawater contamination and to investigate whether the seawater intrusion is in progress. The purpose of this study is to determine the extent of seawater contamination and a preferred channel of the seawater intrusion using geophysical methods such as DC resistivity surveys with Schlumberger array and a dipole-dipole array. In order to determine whether the seawater intrusion is in progress in the area, DC resistivity monitoring with Schlumberger array was performed. According to the resistivity map obtained from the inversion of the resistivity data measured with Schlumberger array, the study area is divided into two districts as relatively lowly resistive (less than 30 ohm-m) and highly resistive (more than 30 ohm-m) areas. The distribution of the lowly resistive area is consistent with the distribution of the layer composed of clay minerals, and the resistivity of this layer decreases slowly as approaching to the old seashore. Hydrogeological analysis shows that the clay layer within a distance of about 200 m from the seashore has been already contaminated by sea-water and its electric conductivity is 8 times higher than that of the sand layer covered by the clay layer. According to the results of the 2-dimensional DC resistivity surveys with a dipole-dipole array, there are two preferred channels of the seawater intrusion in the site, and both the channels are in the NW-SE direction from the old seashore. The lowly resistive zone in the southern channel extends to a depth of 80 m. The DC resistivity monitoring with Schlumberger array was carried out along the preferred channel which has the low resistivity Bone (fracture zone) that extended to a depth of 80 m. The time series of apparent resistivity, measured at a distance of 260 m from the old coast line, fluctuates with a period of 12 hours. From these observations, it can be concluded that the seawater intrusion caused by tidal action is still in progress along the fractured zone interpreted by the DC resistivity surveys with a dipole-dipole array.

• Korean journal of applied entomology
• /
• v.50 no.3
• /
• pp.235-245
• /
• 2011

Temperature-related parameters of Panonychus citri (McGregor) (Acarina: Tetranychidae) development were estimated and a stage-structured matrix model was developed. The lower threshold temperatures were estimated as $8.4^{\circ}C$ for eggs, $9.9^{\circ}C$ for larvae, $9.2^{\circ}C$ for protonymphs, and $10.9^{\circ}C$ for deutonymphs. Thermal constants were 113.6, 29.1, 29.8, and 33.4 degree days for eggs, larvae, protonymphs, and deutonymphs, respectively. Non-linear development models were established for each stage of P. citri. In addition, temperature-dependent total fecundity, age-specific oviposition rate, and age-specific survival rate models were developed for the construction of an oviposition model. P. citri age was categorized into five stages to construct a matrix model: eggs, larvae, protonymphs, deutonymphs and adults. For the elements in the projection matrix, transition probabilities from an age class to the next age class or the probabilities of remaining in an age class were obtained from development rate function of each stage (age classes). Also, the fecundity coefficients of adult population were expressed as the products of adult longevity completion rate (1/longevity) by temperature-dependent total fecundity. To evaluate the predictability of the matrix model, model outputs were compared with actual field data in a cool early season and hot mid to late season in 2004. The model outputs closely matched the actual field patterns within 30 d after the model was run in both the early and mid to late seasons. Therefore, the developed matrix model can be used to estimate the population density of P. citri for a period of 30 d in citrus orchards.

• Journal of The Korean Association For Science Education
• /
• v.33 no.5
• /
• pp.893-910
• /
• 2013

The purpose of this study was to identify changes in mental models of students in the elementary school about causes of seasonal changes. During a total of eight sessions, eight sixth graders were asked to describe the causes of seasonal changes through pictures, writing and thinking aloud by using microgenetic research methods, and the changes in mental models were examined. When the research was conducted, linguistic and behavioral factors and contents of interviews of participants were recorded on video. Moreover, a variety of materials such as field observation chart were written by a researcher and mental models records were written by a student. The protocol was written by integration of collected results, and it was repeated to read and was inductively categorized. The results of this study were as follows: First, participants' mental models about causes of seasonal changes were changed in various paths within and across sessions. Participants' mental models that had been more changed in various ways were closer to the scientific model. In addition, like rotation and revolution, students who correctly established the preconceptions related to seasonal changes formed the mental models consistent with scientific concept based on new information. On the other hand, students who did not correctly establish the preconceptions did not deviate from non-scientific mental models. Second, prior knowledge, experience and information which participants held in advance, accuracy of prior knowledge, resolution of inconsistency between new knowledge and existing mental models, activation of mental models through operation of models and drawing an picture affected the changes of mental models. Teachers should provide to learners with sufficient experience which can be configured to various mental models in order to form the scientific concepts. And they need to let learners feel the doubt and resolve it through presentation of new teaching material which is inconsistent with the existing mental models.