• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.71-75
• /
• 2012

For the practical application of a YBCO superconductor bulk magnet, the superconductor bulk magnet with strong and stable magnetic field on a large area surface should be fabricated. To satisfy these requirements, we have designed a conduction-cooled bulk magnet system using six single grain YBCO bulk superconductors. Six rectangular-shaped YBCO bulk superconductors with a dimension of $38{\times}38{\times}15mm^3$ were field-cooled at 20 K using a superconductor magnet with maximum operating magnetic field of 4 T. The magnetic flux of 3.0 T and 2.8 T were achieved on the surface of bulk superconductors and over the vacuum chamber surface of the refrigerator, respectively.

• Progress in Superconductivity
• /
• v.9 no.1
• /
• pp.107-110
• /
• 2007

Bi/CNT composite and resin/CNT were chosen to improve the mechanical properties of $YBa_2Cu_3O_7$(YBCO) superconductor. In order to elucidate the effects of Bi/CNT composite and resin/CNT in YBCO superconductors, melt texture superconductor were impregnated by mixed compound of Bi and CNT into the artificial holes parallel to the c-axis, which were drilled on the YBCO superconductor. Various amount of Bi/CNT and resin/CNT were impregnated to YBCO superconductor with different holes diameters. Typical artificial holes diameters were 0.5, 0.7, and 1.0 mm respectively. Result of three-point bending test measurement, the bending strength with resin/CNT impregnation was improved up to 59.64 MPa as compared with 50.79 MPa of resin/CNT free bulk. Resin/CNT impregnation has been found to be one of the effective ways in improving the mechanical properties of bulk superconductor.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.77-80
• /
• 1999

In this paper. We experimentally investigated the magnetic properties of YBCO bulk superconductor using AC magnetization method. The sample is 2.8cm wide in a diameter and 1.4cm long. We applied Ac magnetic field parallel to the direction of length of YBCO bulk. It is observed that YBCO bulk has the diamagnetic properties. AC loss calculation of YBCO bulk superconductor was performed by evaluating the total area of magnetization traces. As depends on the frequency and amplitude of the applied magnetic field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.21-24
• /
• 2002

In this paper, for the study on the fabrication of YBCO superconductor wire, a double layered YBCO superconductor wire was fabricated by electrophoretic method on metal Ag wire(${\Psi}$0.8 mm). On the basis of previous researches for the fabrication of superconductor wire, the acetone suspension solution with 8 vol.% of 1% PEG(1000) was used and high molecular adhesive was experimentally performed for an improvement of the critical current density of superconductor wire. It was found that the Ag inter-layer deposited on the superconductor wire affect to the state of second YBCO film and its critical current density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.357-358
• /
• 2009

YBCO Coated Conductor is named by Second generation Superconductor Tapes. It is different with First generation Superconductor Tapes. YBCO Coated Tape's Specific difference with BSCCO Tape is more strong mechanical Durability. This is important role to apply to Superconducting Machines. For mechanical transforming of YBCO Coated Tapes, We are using the well designed former. The Merit of Transformation is several. First, We vary the Superconducting Characteristics according to mechanical stress. Second, We reduce the Volume of Superconductor, So We achieve reducing the volume of Superconducting Machines. On this Study, We experiment the transporting Current Characteristics of two types YBCO Coated Conductor. The one is Stainless Stabilized YBCO Conductor, and the other one is Copper Stabilized YBCO Conductor.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.27-30
• /
• 2002

One dimensional conduction equation is solved by finite difference method, to analyse the stability of Au/YBCO film deposited on a sapphire substrate. Joule heat is included in the case of current sharing state. The analysis shows the quench and recovery of superconductor depending on the amount of thermal disturbance release on the center surface of superconductor. The critical disturbance energies for different filling factor and operating current are calculated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.12
• /
• pp.1067-1072
• /
• 2009

YBCO coated conductor is named by second generation superconductor tapes. It is different with first generation superconductor tapes. YBCO coated conductor's specific difference with Bi-2223/Ag tape is more strong mechanical durability. This is important role to apply to superconducting machines. For mechanical transforming of YBCO coated conductors, we are using the well designed former. The merit of transformation is several. First, we vary the superconducting characteristics according to mechanical stress. Second, we reduce the volume of superconductor, so we achieve reducing the volume of superconducting machines. On this study, we experiment the transporting current characteristics of one types YBCO coated conductor. YBCO coated conductor with Ie of 70 A and voltage grade of 0.6 V/cm were connected to spiral former to conduct current application test.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.259-261
• /
• 1999

In this paper, we investigated the frequency dependences of AC loss and the magnetic properties of a superconductor using magnetization method. We used the YBCO bulk superconductor sample which has a square-shaped cross sectional area of $6mm{\times}6mm$. and 43mm-long in axial direction. The applied AC magnetic field was parallel to the direction of sample axis. It is observed that YBCO bulk has the diamagnetic properties. AC loss calculation of YBCO bulk superconductor was performed by evaluating the total area of magnetization traces. We performed two cases of experiments, one for $B_m<B_p$ and the other for $B_m<B_p$. The experiments showed that the AC loss dependences on frequency were different in each mode, as was indicated in other publications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1125-1130
• /
• 2003

The electrophoretic deposition method using the suspension solution with additives under the electric potential was applied for the fabrication of YBCO superconductor wire. This method was able to simplify the fabrication facilities, and produce an uniform and dense thick film. To improve the critical current density of deposited films, the additive PEGs(Poly Ethylene Glycole) with the molecular weight of 600, 1000 and 3400 were used as chemical binders for the suspension solution. The organic additive (PEG) showed better effects to the properties of YBCO superconductor wire. The PEG improved the adhesion between superconductor particles and suppressed the crack on the surface, which enhanced the surface uniformity and density of YBCO deposited film. It was found that acetone suspension solution showed better deposition properties than the others. The samples fabricated in the solution with the additive, 8 vol.% of 1% PEG(1000), showed the highest critical current density measured as 2300∼2400 A/$\textrm{cm}^2$ at 77 K, 0 T.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.333-336
• /
• 2021

Oxide YBCO bulk superconductors are manufactured using the melt process. Because seed crystal growth method utilizes a slow-spreading layer-by-layer reaction, a long-term heat treatment is required to manufacture a single-crystal specimen of several cm. In this study, the melt process method was applied to compensate for the shortcomings of the seed crystal growth method. The thickness of the upper and lower pellets of the YBCO bulk was molded to 40 mm, and YBCO superconductor was produced by heat treatment. The measurement results of capture magnetism was in line with the literature. This results in a relationship that the higher the growth of Y211 particle in the YBCO, the higher the superconducting properties. We analyzed the YBCO superconductor, focusing on the Y₂BaCuO₅ particle distribution.