• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.211-223
• /
• 1995

The purpose of the present study is to examine shearing mechanism through rigidplastic finite element analysis. Difficulties arise in simulating shearing process due tothe narrow shear band formation andlackof proper fracture resolve these difficulties by using adaptive mesh generation crriterion. The simulation results are obtained for various punch clearances and these are compared with existing experimental results. It is shown that FEM simulation technique can be used to further understand the shearing mechanism.

• 한국생명과학회:학술대회논문집
• /
• 한국생명과학회 2005년도 국제학술심포지움 The 44th Annual Meeting of Korean Society for Life Science
• /
• pp.211-212
• /
• 2005

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 춘계학술발표논문집
• /
• pp.208-211
• /
• 2009

발성법은 좋은 목소리로 크고, 아름답게 노래를 부르기 위한 훈련 방법이다. 그러나 결국 이러한 발성의 표현은 무대 위에서 이루어져야 한다. 성악이나 판소리의 경우는 주로 정적인 상태에서의 감상을 위한 음악인데 반해 대중음악은 동적인 상태에서 관객과 함께 즐겨야 하는 경우가 대부분이다. 따라서 대중가요 가수들에게는 관객과 함께 호흡하며 노래하되 절대 흥분하지 않는 상태에서 올바른 발성을 해야 하는 냉정함이 요구된다. 발성은 노래를 부르기 위한 사전과정이며 가수는 무대에서 노래를 해야 한다. 따라서 좋은 노래를 부를 수 있도록 기초 과정을 거쳐 만들어진 발성을 올바르게 노래에 표현하는 방법을 연구해보도록 하겠다.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.205-211
• /
• 2006

Among other critical conditions in rotor systems the large non-linear vibration excited by bearing non-linearity causes the rotor failure. For reducing this catastrophic failure and predictive detection of this phenomenon the analysis of orthotropic bearing non-linearity in rotor system using higher order frequency response functions (HFRFs) is conducted and is shown to be theoretically feasible as that of non-rotating structures. The complex HFRFs based on the Volterra series are newly developed for the process and investigated their features by using the simple forms of the FRFs associated with the forward and the backward modes.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.132-135
• /
• 2004

We fabricated YBCO thick films by using a screen printing method with $Y_2$BaCuO$_{5}$(Y211) and BaCO$_3$ powders on Cu-substrate in $N_2$ atmosphere. Cu-sheathed YBCO thick film process is more simple and economic than YBCO coated conductor methods. The heat treatment is performed in the range of 860 - 875 $^{\circ}C$ for 5 min in the tube furnace of $N_2$ atmosphere. The flow rate of $N_2$ gas is fixed 60 $m\ell$/min. Microstructure and phases of thick films were investigated by optical microscope, X-ray diffraction(XRD) and SEM. At heat-treatment temperature, the thick films were partially melted by liquid reaction between CuO of oxidized copper substrate and the powders screen-printed on Cu-sheath. During the heat-treatment procedure, YBCO superconducting grains nucleate.e.

• Advances in nano research
• /
• 제10권3호
• /
• pp.211-219
• /
• 2021

The evaluation of the corrosion resistance of titanium with a TiO2 nanotubes top layer was carried out (TiO2 NT). These nanostructures were evolved into anatase nanoparticles without heat treatment in an aqueous medium, which is a novel phenomenon. This work analyzes the layer between the nanotube bottom and the substrate, which is thin and still susceptible to corrosion. The bottom of TiO2 nanotubes having Fluor resulting from the synthesis process changed between amorphous to crystalline anatase with a crystallite size of about 4 nm, which influenced the corrosion rates. Four kinds of samples were evaluated. A) NT by Ti anodizing; B) NTSB for Ti plates, either modifying its surface or anodizing the modified surface; C) NT-480 for anodized Ti and heat-treated (480℃) for reaching the anatase phase; D) NTSB-480 for Ti plates, first, modifying its surface using sandblast, after that, anodizing the modified surface, and finally, heat-treated to 480℃ to compare with samples having induced crystallization and passivation. Four electrochemical techniques were used to evaluate the corrosion rates. The surfaces having TiO2 nanotubes with a sandblast pre-treatment had the highest resistance to corrosion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.211-214
• /
• 2008

The Mechanical properties of steel in hot strip mill were associated with the various rolling conditions such as alloy composition, plastic deformation, cooling history and so on. After coiling process of strip which is the end of hot rolling process, the coil can be the final product or can be applied by another process, that is, cold rolling or skin pass rolling with the additional changes of mechanical properties. Skin pass rolling process with the small reduction affects the mechanical properties of the strip. Because many kinds of hot strips are delivered to the customers after the skin pass process, it is important for us to know the skin pass effects for the mechanical properties of the hot rolling strip. In this study, the variations of mechanical properties of the strip after the skin pass rolling will be discussed. Then, the mathematical model will be proposed for the prediction of mechanical properties of the final products with the comparison between measured and calculated values.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.271-274
• /
• 1999

We are investigating epitaxially grown YBa$_2Cu_3O_x$(123) on MgO single crystal by partial melting process for high power application. After fabricating of BaCuO$_2$(011), Y$_2BaCuO_5$(211) powder, we made YBa$_2Cu_3O_x$(123) Paste with just mixing of (211), (011) and CuO(001) powders. Screen printing method was used to coat YBa$_2Cu_3O_x$(123) paste on MgO single crystal. To reduce the reaction in low temperature, rapid heating was conducted at partial melting temperature. The film was analysed with the difference of cooling-rate, thickness, reaction temperature by XRD, SEM, in-plane alignment, out-of-plane alignment, temperature-resistivity characteristics.

• 한국인터넷방송통신학회논문지
• /
• 제20권1호
• /
• pp.211-218
• /
• 2020

최근 블록체인 기술의 등장으로 이 기술을 적용하여 기존의 시스템에 적용하고자 하는 시도가 증가하는 추세이다. 블록체인 기술의 합의원장과 스마트 컨트렉트를 이용하여 문서, 증명, 인증, 검증 등의 과정이 필요한 다양한 분야에 분산처리를 기반으로 하여 보안 성능과 신뢰성을 향상하기 위해 민간 분야에서 인증서, 암호화, 해쉬연산, 블록체인 등을 활용한 방법들을 연구하고 있으나, 아직까지 실용화 단계에는 이르지 못하고 있어 기술 확산에 어려움이 있는 상황이다. 본 논문에서는 블록체인 기반 업무 플랫폼 환경에서 적용이 용이하고 사용자 편의성과 강력한 보안 환경을 제공하기 위하여 사용자 장치 등록 인증 알고리즘, 블록체인 기반 질의응답 인증 알고리즘, 인증서 발급, 검증 프로세스와 암호화 알고리즘, 서버사이드 인증 알고리즘의 4가지 방법으로 블록체인 기반 시스템 인증방법에 대해 제안하였다.

• Corrosion Science and Technology
• /
• 제17권5호
• /
• pp.211-217
• /
• 2018

Natural degradation of grounding-electrode in soil environment should be monitored for several decades to predict the lifetime of the grounding electrode for efficient application and management. However, long-term studies for such electrodes have many practical limitations. The conventional accelerated corrosion test is unsuitable for such studies because simulated soil corrosion process cannot represent the actual soil environment. A preliminary experiment of accelerated corrosion test was conducted using existing test standards. The accelerated corrosion test that reflects the actual soil environment has been developed to evaluate corrosion performances of grounding-electrodes in a short period. Several test conditions with different chamber temperatures and salt spray were used to imitate actual field conditions based on ASTM B162, ASTM B117, and ISO 14993 standards. Accelerated degradation specimens of copper-bonded electrodes were made by the facile method and their corrosion performances were investigated. Their corrosion rates were calculated to $0.042{\mu}m/day$, $0.316{\mu}m/day$, and $0.11{\mu}m/day$, respectively. These results indicate that accelerated deterioration of grounding materials can be determined in a short period by using cyclic test condition with salt spray temperature of $50^{\circ}C$.