• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.4
• /
• pp.209-211
• /
• 2014

This paper proposes a fast motion estimation method which can reduce the computational complexity of HEVC encoding process. While the previous method determines its search range based on a distance between a current and a reference pictures to accelerate the time-consuming motion estimation, the proposed method adaptively sets the search range according to motion vector difference between prediction units. Experimental results show that the proposed method achieves about 10.7% of reduction in processing time of motion estimation under the random access configuration whereas its coding efficiency loss is less than 0.1%.

• The Korean Society of Law and Medicine
• /
• v.8 no.1
• /
• pp.179-211
• /
• 2007

To succeed the claim of medical malpractice litigation, the patient as a plaintiff should establish the medical fault of a physician as a defendant, and the causation between the fault and damages. Because of the extraordinary nature of medical province, however, this application of a legal principles is rigorous with the patient. In addition, given the causation between the validation of physician's fault and damage is not attested, patient is not awarded anything. In order to overcome a difficulty of patient's verification and ensure the right to fair process, it was demonstrated the lightening of burden of proof in medical malpractice litigation and the acceptance of the responsibility for an illegal act in a prescribed range in the absence of the causation between the physician's fault and damage. This paper deals with the judgement of causation and burden of proof in medical malpractice litigation, and the acceptance of responsibility in the absence of the causation between the physician's fault and damage. Also, this study recommends a tendency of our precedent through the comparative case method of ours and Japan.

• Journal of Sensor Science and Technology
• /
• v.7 no.3
• /
• pp.211-217
• /
• 1998

Si and ITO-coated #7059 glass wafers were electrostatically bonded by employing #7740 interlayer. It was inferred that the thermionic- electrostatic migration of $Na^{+}$ ions in the #7740 interlayer played an important role in the bonding process through SIMS analysis. The temperature and voltage required for reliable electrostatic bonding were in the range of $180{\sim}200^{\circ}C$ and $50{\sim}70V_{dc}$(10min), respectively. The low temperature Si-ITO coated glass bonding can be effectively applied to the packaging of field emission devices.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.198-211
• /
• 2015

Aviation industry, which is highly dependent on human resources, emphasizes airline's human resources management and performance check because quality of services provided to customers is closely related to airline's employees. Because roles of cabin crews take a significant portion of services provided to customers, airlines and cabin crews represent an inseparable relationship. Attitudes of cabin crews who plays the role of facing and dealing with customers directly in the process of providing flight related services are an essential factor that determines an image of an airline and actually have significant impact on the performance as well. By increasing performance satisfaction of cabin crews, organizational loyalty can be strengthened and such successful human resources management could have a positive effect on increasing customer satisfaction as well as revenues. From corporate's perspective, performance satisfaction of an employee is a crucial factor that decides the quality of service provided to customers that supports employee retention as well as client retention. This can eventually lead to organization loyalty that can positively affect overall work performance. Thus if corporates put efforts in and invests to improve and develop favorable attitudes and service quality within employees, performance satisfaction and organizational goals will be more effectively achieved.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.200-211
• /
• 2018

The aim of this systematic review was to evaluate the effectiveness and complications of corticotomy and piezocision in canine retraction. Five electronic databases (PubMed, SCOPUS, Web of Science, Embase, and CENTRAL) were searched for articles published up to July 2017. The databases were searched for randomized control trials (RCTs), with a split-mouth design, using either corticotomy or piezocision. The primary outcome reported for canine retraction was either the amount of tooth movement, rate of tooth movement, or treatment time. The secondary outcome was complications. The selection process was based on the PRISMA guidelines. A risk of bias assessment was also performed. Our search retrieved 530 abstracts. However, only five RCTs were finally included. Corticotomy showed a more significant (i.e., 2 to 4 times faster) increase in the rate of tooth movement than did the conventional method. For piezocision, both accumulative tooth movement and rate of tooth movement were twice faster than those of the conventional method. Corticotomy (with a flap design avoiding marginal bone incision) or flapless piezocision procedures were not detrimental to periodontal health. Nevertheless, piezocision resulted in higher levels of patient satisfaction. The main limitation of this study was the limited number of primary research publications on both techniques. For canine retraction into the immediate premolar extraction site, the rate of canine movement after piezocision was almost comparable to that of corticotomy with only buccal flap elevation.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.240-244
• /
• 2000

The three-dimensional orientation distribution function of a conical shaped tungsten liner prepared by the thermo-mechanical forming process was analyzed by 1.525$\AA$ neutrons to carry out the Rietveld refinement. The pole figure data of three reflections, (110)(220) and (211) were measured. The orientation distribution functions for the normal and radial directions were calculated by the WIMV method. The inverse pole figures of the normal and radial directions were obtained from their orientation distribution functions. The Rietveld refinement was performed with the RIETAN program that was slightly modified for the description of preferred orientation effect. We could successfully do the Rietveld refinement of the strongly textured tungsten liner by applying the pole density of each reflection obtained from the inverse pole figure to the calculated diffraction pattern. The correction method of preferred orientation effect based on the inverse pole figures showed a good improvement over the semi-empirical texture correction based on the direct usage of simple empirical functions.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.211-216
• /
• 2008

Gap fillar antennas are needed for serving the high quality of DMB through the cellular phone by eliminating the shadow regions among buildings or underground. We implement Quadrifilar Helical Antenna using phase difference with PCB feeding lines without coaxial cables and four impedance matching circuits. It is shown that the antenna characteristics is affected by the size and diameter through the simulation process using MicroWave Studio and it is applied for implementing QHA. Experiment results confirm that the performance can be gained as same as the simulation data by using the phase difference with PCB feeding lines without additional impedance matching circuits.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.211-215
• /
• 2005

The binary Al-Mg alloys are the basis for the 5000 series of non-heat-treatable aluminum alloys. In general, 5000 series of aluminum alleys have a high strength, good welding characteristics and a high resistance to corrosion, especially under the seawater. Thus the aluminum alloys are adopted in the hull material of hovercraft that is required light in weight as well as high strength. It is very important that the weldability problem of these alloys caused by high thermal conductivities welding deformation, porosity and so on. in this study, auto-welding equipment was applied for aluminum welding automation. Also, optimal welding data were studied by investigating welding characteristics for various shapes of weldment to use Al 5083 that is representative structural materials of the 5000 series of aluminum alloys.

• Corrosion Science and Technology
• /
• v.10 no.6
• /
• pp.205-211
• /
• 2011

The severe corrosion environment makes the steel product lifecycle short while Cu-alloys with anti-corrosion characteristic used in sea water are too expensive. This study shows that the Cu-alloy(Cu-37.25% Zn-0.67%Al) used in sea water environment can be superseded by SS400 with various coating process, evaluating electrochemical characteristics. Three coating processes were applied to SS400 such as PTFE + Zn coaing, Zn + PTFE coating and only Zn electrogalvanizing coaing. Various electrochemical experiments such as open circuit potential measurments, potentiodynamic polarization tests and analyses of Tafel constants. Mechanical properties were also measured by tensile test and hardness tests. As a result, Zn + PTFE coating for SS400 steel presented the excellent anti-corrosion characteristic in sea water.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.211-224
• /
• 2008

Occurrences of large-scale food-related mishaps around the globe are degrading the safety and confidence on food items. This can be said to result from problems such as information asymmetry between the supplier and the consumer(information user). It makes it difficult to confirm product-related information including who produced an item how, what manufacturing process was involved, and how the product was distributed, and deal with a food-related trouble. The research verified and analyzed what has an effect on the intention to use Traceability System when the user uses information service.