• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.291-300
• /
• 2008

Catalytic cracking of n-octane was carried out over H-ZSM-5 zeolite catalysts after calcination with air and steaming with 100% steam in the temperature range of $550-750^{\circ}C$ for 24 h and compared with the results of thermal cracking. The increase of calcination and steaming temperature resulted in the decrease of surface area, pore volume, and strong acid sites, which was mainly caused by the dealumination of H-ZSM-5 framework. It was found by $^{27}Al$ and $^{29}Si$ MAS NMR that the dealumination was proceeded through the transformation process of tetrahedral framework Al${\rightarrow}$penta-cordinated Al ${\rightarrow}$ octahedral framework Al and the phenomena was much more severe in steaming conditions than that of calcination. In the catalytic cracking of n-octane, as the temperatures of calcination and steaming were increased, the conversion of n-octane, the selectivity of light olefins and ethylene to propylene ratio were decreased due to the dealumination of framework aluminum resulting the loss of acidic strengths. The conversion, selectivity of light olefins and ethylene to propylene ratio reached almost to the level of thermal cracking after steaming at $750^{\circ}C$ for 24 h.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1227-1234
• /
• 1999

Modified atmosphere packaging of peaches(Prunus persica L. Batsch) was investigated to extend their freshness during distribution. Peaches were packaged in the PE film(20LD, 40LD), the PE film modified by addition of 5%(w/w) zeolite(20CK, 40CK), and the PE film containing $Purafil^{\circledR}$ sachet(20LP, 40LP). Quality indexes of peaches during storage at $20^{\circ}C$ were measured in terms of weight loss, soluble solids content, pH, titratable activity, firmness, color and sensory properties. Gas composition and ethylene content In the film bags changed rapidly at the early stage of storage. Within 8 days, weight loss of the unpacked control increased upto ll.8% but those of the packaged remained below 2%. There was no significant difference in soluble solids content and pH in all the treatments. Ethanol content of peaches packed in 40LD was 12.88 mL/kg and acetaldehyde content in 40CK was $160\;{\mu}L/kg$ for 8 days. Peaches packed in 20CK showed a good visual and sensory Quality. The result suggested that active packaging treatment such as 20CK could be used for extending freshness of peaches during transport period at ambient temperature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.116-122
• /
• 2006

This study was carried out to compare physical properties of the horticultural substrates measured by the European standard methods (CEN methods) and the Rural Development Administration of Korea methods (RDA methods). Sixty horticultural substrates including 40 marketed substrates and 10 organic and inorganic raw materials such as peat moss, coir dust, rice hull, perlite and zeolite were sampled. The samples were then analyzed for 6 physical properties by both CEN methods and RDA methods. The results of both methods were analyzed by linear regression. Bulk density ($R^2=0.8304$), particle density ($R^2=0.8136$) and porosity ($R^2=0.6374$) values measured by the two methods were highly significant. Whereas those for easily available water (EAW, $R^2=0.3327$), water volume ($R^2=0.2692$) and air volume ($R^2=0.0739$) were not significant. Further research is needed to facilitate the conversion between the two methods.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.728-734
• /
• 2002

Stabilization behavior of Cr, Cd, Cu, Pb, Fe and Zn heavy metals in the EAF dust was investigated by adding EAF dust to clay or white clay, respectively, up to 50 wt% with 10 wt% intervals and sintering at temperatures between 200 and $1200^{\circ}C$ with $200^{\circ}C$ intervals with an aid of ICP-AES followed by TCLP test to evaluate heavy metal cation exchange capacity of the clay or the white clay. The clay or the white clay had a better Cr ion exchange capacity than that of zeolite. The TCLP leaching test for the sintered specimens showed that Cr and Fe were rarely detected for all the specimens and the concentration of Cd and Zn decreased with increasing sintering temperature and decreasing EAF dust contents respectively. When the clay or the white clay were mixed with EAF dust, cation exchange may occur between the clay and the EAF dust so that the first stabilization of the mixtures containing semistabilized heavy metals may happen. Stabilization of heavy metals in the ceramic bodies was further completed probably due to the eutectic reaction caused by the sintering of semi-stabilized mixtures. It was conceivable that the white clay rather than the clay may be a better stabilizer for the EAF dust containing heavy metals.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2012

In this study, $CO_2$ adsorbent was developed for removing low concentration of $CO_2$ in multiple-use facilities. The efficiency of the adsorbent which was improved selective $CO_2$ adsorption capabilities was evaluated. The pellet type adsorbent was modified from a commercial zeolite with mixing LiOH, binder, additives, and $H_2O$. Column tests showed over 90 % of $CO_2$ was adsorbed within 400min. Chamber tests including batch and continuous types were performed for evaluating the adsorbent module. By batch tests, it was evaluated that about 92% of $CO_2$ was removed within 30 min. By continuous tests, 70% of $CO_2$ was removed within 30 min. It was analyzed that over 2,500 ppm of $CO_2$ was continuously removed as shown chamber tests. The reproducibility tests repeatedly performed for 15 days shows that over 1,000 ppm of $CO_2$ was continuously removed. Adsorption capacity of the developed adsorbent was 5.0mmol $CO_2/g$ adsorbent which was analyzed by TGA. It was estimated that the modified adsorbent was applicable to low $CO_2$ concentration and low temperature of indoor environment.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.352-360
• /
• 2012

Bacillus clausii I-52 which produced SDS- and $H_2O_2$-tolerant extracellular alkaline protease (BCAP) was isolated from heavily polluted tidal mud flat of West Sea in Incheon, Korea and stable strain (transformant C5) of B. clausii I-52 harboring another copy of BCAP gene in the chromosome was developed using the chromosome integration vector, pHPS9-fuBCAP. When investigated the production of BCAP using B. clausii transformant C5 through pilot-scale submerged fermentation (500 L) at $37^{\circ}C$ for 30 h with an aeration rate of 1 vvm and agitation rate of 250 rpm, protease yield of approximately 105,700 U/mL was achieved using an optimized medium (soybean meal 2%, wheat flour 1%, sodium citrate 0.5%, $K_2HPO_4$ 0.4%, $Na_2HPO_4$ 0.1%, NaCl 0.4%, $MgSO_4{\cdot}7H_2O$ 0.01%, $FeSO_4{\cdot}7H_2O$ 0.05%, liquid maltose 2.5%, $Na_2CO_3$ 0.6%). The enzyme stability of BCAP was increased by addition of polyols (10%, v/v) and also, the stabilities of BCAP towards not only the thermal-induced inactivation at $50^{\circ}C$ but also the SDS and $H_2O_2$-induced inactivation at $50^{\circ}C$ were enhanced. Among the polyols examined, the best result was obtained with propylene glycol (10%, v/v). The BCAP supplemented with propylene glycol exhibited extreme stability against not only the detergent components such as ${\alpha}$-orephin sulfonate (AOS) and zeolite but also the commercial detergent preparations. The granulized enzyme of BCAP was prepared with approximately 1,310,000 U/g of granule. Wash performance analysis using EMPA test fabrics revealed that BCAP granule exhibited high efficiency for removal of protein stains in the presence of anionic surfactants as well as bleaching agents. When compared to Savinase 6T$^{(R)}$ and Everlase 6T$^{(R)}$ manufactured by Novozymes, BCAP under this study probably showed similar or higher efficiency for the removal of protein stains. These results suggest that the alkaline protease produced from B. clausii transformant C5 showing high stability against detergents and high wash performance has significant potential and a promising candidate for use as a detergent additive.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.155-162
• /
• 2012

When RC (Reinforced Concrete) structures are exposed to sea water, steel corrosion can occur and this leads a degradation of structural performance. Referring the electro-deposition system with sea water from the 1st step research, durability and structural performance are evaluated in coated steel and RC members containing it in the 2nd research. In the durability performance test, Half Cell Potential test is performed and the coated steel is evaluated to have the high resistance to corrosion, which shows only 35% of corrosion velocity in normal (bare) steel. In the structural performance test, tensile strength, adhesive strength, and flexural/shear in RC member are performed. For the electro-deposit coated steel, increasing ratios of 3.2% and 8.8% are evaluated in the test of tensile strength and adhesive strength, respectively. For the structural test in RC member, there is no big difference between RC members with coated and non-coated steel in ultimate load and failure pattern It is evaluated that the chemical compound with $CaCO_3$ and $Mg(OH)_2$ from electro-deposition causes slightly increased structural performance. The electro-deposit coated steel can be more widely applied after performance verification from several tests like fatigue, resistance to impact, and long term-submerging test.

• Journal of Animal Science and Technology
• /
• v.58 no.7
• /
• pp.24.1-24.7
• /
• 2016

Background: Clinoptilolite is a natural zeolite with high adsorption capacity for polar mycotoxins such as aflatoxins. The efficacy of clinoptilolite in ameliorating the toxic effects of aflatoxicosis has been proven in monogastric animals, but there is no such evidence for ruminants. The aim of this study was to evaluate, under field conditions, whether the dietary administration of clinoptilolite in dairy cows could reduce the concentration of aflatoxin M1 ($AFM_1$) in bulk-tank milk, in farms with higher than or close to $0.05{\mu}g/kg$ of milk (European maximum allowed residual level). An objective of the present study was also to investigate the effect of particle size of clinoptilolite on aflatoxin binding. Methods: Fifteen commercial Greek dairy herds with AFM1 concentrations in bulk tank milk ${\geq}0.05{\mu}g/kg$ were selected. Bulk tank milk AFM1 was determined prior to the onset and on day 7 of the experiment. Clinoptilolite was added in the total mixed rations of all farms at the rate of 200 g per animal per day, throughout this period. Two different particle sizes of clinoptilolite were used; less than 0.15 mm in 9 farms (LC group) and less than 0.8 mm in 6 farms (HC group). Results: Clinoptilolite administration significantly reduced $AFM_1$ concentrations in milk in all farms tested at an average rate of 56.2 % (SD: 15.11). The mean milk $AFM_1$ concentration recorded on Day 7 was significantly (P < 0.001) lower compared to that of Day 0 ($0.036{\pm}0.0061$ vs. $0.078{\pm}0.0074{\mu}g/kg$). In LC group farms the reduction of milk $AFM_1$ concentration was significantly higher than HC group farms ($0.046{\pm}0.0074$ vs. $0.036{\pm}0.0061{\mu}g/kg$, P = 0.002). As indicated by the Pearson correlation, there was a significant and strong linear correlation among the milk $AFM_1$ concentrations on Days 0 and 7 (R = 0.95, P < 0.001). Conclusions: Dietary administration of clinoptilolite, especially of smallest particle size, at the rate of 200 g per cow per day can effectively reduce milk $AFM_1$ concentration in dairy cattle and can be used as a preventive measure for the amelioration of the risks associated with the presence of aflatoxins in the milk of dairy cows.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.135-144
• /
• 2005

In the high-Ca limestone zone of the Pungchon Formation of the Lower Chosun Supergroup, cryptocrystalline alterations with reddish brown color occur as fissure-fillings or coatings, which was originated from the upper formation, i. e., the Hwajeol Formation. The precipitates result in degradation and contamination of the high-Ca limestone ore in grade and quality, showing characteristic occurrence and mineral composition typical of suggesting a supergene origin. Chalcedonic quartz, kaolinite, illite, goethite and hematite are constituting a characteristic authigenic mineral assemblage and, in places, smectite is less commonly included in the weathering product. In addition to these authigenic phases, some detrital minerals such as mica and orthoclase constituting relatively coarser grains are also rarely present in the supergene alterations. A rather complex clay facies consisting of kaolinite, illite and smectite in the alterations seems to correspond to the typical clay composition of the reported residual pedogenic soils by limestone weathering. The cryptocrystalline weathering product is partly altered to stilbite, a characteristic hydrothermal zeolite, in places, by the hydrothermal contact of late stage. The time of formation and infiltration of the supergene alterations seems to correspond to the stage just after the epithermal alteration of the Pungchon Limestone, i. e., an early Jurassic age. The supergene alteration, which may imply the stage of uplifting, weathering and erosion of the Chosun Supergroup, appears to have undergone at an oxygen-rich environment in descending water of meteoric origin by means of a chemical leaching and diffusion.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.557-561
• /
• 2003

It is important to find out a new material having high removal efficiency for the harmful algal blooms because the dispersion of Hwangto in a large amount to the sea water may bring some ecologically unfavorable problems. For this purpose, the efficiency of several natural and synthetic mineral species for the mitigation of algal blooms was measured. The mixing ratio of monominerals and the sea water with 3,000∼5,000 cells/$m\ell$ of Cochlodinium polykrikoides was 10 g/${\ell}$ and the removal ratio was measured by counting the living cells after the dispersion time of 10, 30 and 60 min., respectively. According to the experimental results, the removal ratio by illite, kaolinite, montmonmorillonite, red mud, Na-A type of zeolite ranged 84-92% after 1hr of contact time, which is comparable to that of Hwangto. The size of above monominerals ranged 3∼50${\mu}m$. Meanwhile, the amorphose material and hematite with the size of 50∼100 nm showed excellent removal ratio of more than 99% after 30min. of dispersion. The results of the study showed that the removal ratio was not related to the chemical composition and pH of the minerals applied but to the grain size. The experimental results strongly suggest that the main mitigation mechanism would be the contact and coagulation.