• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.2
• /
• pp.59-67
• /
• 2016

Recently, the increased complexity of systems has made systems engineering necessary. It is very useful for system designers to understand the whole context of the concerned system based on systems engineering. A system model can be used to describe the outcome of a system design. A system model describes the system from the viewpoint of the stakeholder's needs using the mutually exclusive and collectively exhaustive principle. A system model can be used to smoothly design a large and complicated system based on the systems engineering development process. Many companies and countries are attempting to apply model-based systems engineering, and the significance of the system model quality is increasing as system models are referenced during system development. In this paper, we propose a quality assessment method for ontology which is one of system models by focusing on the system development process. First, in this process, a system developer should explicitly show the relationship between viewpoints. Then, the system developer should select dependent rather than independent viewpoints. With dependent viewpoints, each viewpoint used to describe the system has some logical relationship. The set of viewpoints makes it possible to show, not only tangible and physical system parts, but also conceptual system parts. In this paper, we develop an ontological system model of a Japanese weather observation system. By comparing some ontological system models, we verify the effectiveness of explicitly describing the relationships between viewpoints and select dependent viewpoints.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.30-32
• /
• 2004

This paper describes control system design for the DH(dynamic voltage restorer) consisted of a diode rectifier and series inverter applied to 22.9kV distribution system. The DVR control system is consisted of the main two parts. One is a voltage event detector using a neural network and the other is deadbeat controller for the output voltage and current control of the DVR. A simulation model was developed for analyzing performance of the controller and the whole system. The results confirm that the DVR can restore load voltage under the fault of the distribution system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.107-108
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1626-1628
• /
• 2003

The lightning arrester is a very important overvoltage protection device in the electric power system. Therefore, the inspection of lightning arrester whether it keeps its performance or not properly has close related to verifying the safety confidence of the electric power system. But the development of the deterioration measuring method and on-line detecting system, is necessary to monitor the deterioration of the lightening arrestor. In this paper, we developed the lightning arrester degradation monitoring system. This system detected leakage current of lightning arrester by using the ZCT, and analyze the third harmonics ingredient of leakage current using DFT method in the Data Acquisition Unit(DAU). The analyzed current signal is transmit to the Human-Machine Interface(HMI), and HMI alarmed when accident are occurred and informed with the amplitude of leakage current to the operator.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.4
• /
• pp.30-36
• /
• 2015

The principle of an illumination and projection system including LED light sources for a spot type stage lighting system was presented, and its optical system was designed with optimizing parameters by the analytical methods. A dichroic mirror incorporated with an illumination system to optimizing LED source positions and to obtain the compact system. The projection system was optimized with specific constraints such as a chromatic aberration, distortion aberration and angle of incidence angles. Optimized design system has a beam angle from $10^{\circ}$ to $45^{\circ}$, and its illuminance was 4,500lux at distance of 6m on the work plane.

• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.2
• /
• pp.45-56
• /
• 1979

This report presents the development of an integrated logistics support system for a large-scale machinery manufacturing organization. The system consists of 3 major production management systems and 5 assisting systems. The major systems are: i) production planning and control system, ii) cost control system, and iii) material management system. The assisting systems are: i) personnel management system. ii) technology transfer system, iii) quality assurance system, iv) marketing assisting system, and v) management information system. In addition, other management systems such as planning system, R.&.D. system can be considered according to the organizational need. Several system flow models are developed and presented for the total logistics support system.

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.75-87
• /
• 2005

Generally speaking, weapon system is defined as a combination of primary system and support system which are evaluated by capability and operational availability respectively. Recently comparison of total life cycle cost shows that logistic support system is proved to be more important than primary system. However, until now systematic approach to support system development has not been applied in the area of developing support system. We need to construct a universal metric for effectiveness of logistic support system and to cut out whatever activities or support elements which do not contribute to the metric. This paper describes a new approach based on system engineering approach to logistic support system and also classifies five factors of failure, stock-out frequency, administrative delay time, active repair time and logistic delay time that have influence on operational availability of logistic support system.

• Journal of the Korean housing association
• /
• v.15 no.4
• /
• pp.107-115
• /
• 2004

The purpose of this paper is to study on the architectural value in Dom-Ino system. Dom-Ino system by Le Corbusier is a structural system for effective production in terms of physical reproductivity and a modeling system from the view of formal composition. It creates planar grid with a fixed ratio, manipulates the user group, and becomes the basic construction method. Form comes out of geometrical proportion system, and grid-based plan provides regularity and order to elevation planning. Production requires standardization. Indoor space is maintained by uniformed and integrated service facilities. Dom-Ino system was a transitional step of the Modulor system which was created by Le Corbusier in 1945 and composes of and equivalent proportional system. The fact that the numerical proportion system is the one of appropriate design methods implys a progressive concept that architectural configurations are controlled by the technology of that time. And also the system is one of the object type of Corbusier's housing architecture.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.693-697
• /
• 2007

A control system for solar thermal power plant is the control system to coordinate the whole system's operation, including management of distributed control systems, process control for optimal operation of total system, monitoring system operating conditions and doing administrative functions. This work, as a progress report, presents the results obtained so far in building a control system for the 1MW solar thermal power plant. To make the control system, we first defined the control system's hierarchy and classified the role of each layer. Then, as the first stage of making control system, we designed and developed the sun tracking control system for heliostat.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.397-399
• /
• 2000

This paper presents a method for assessing reliability indices of transmission system. Because successful operation of electric power under the deregulated electricity market depends on transmission system reliability management, quantity evaluation of transmission system reliability is very important. The key point idea is based on that the reliability level of transmission system is equal to reliability level difference of between composite power system(HLII) and generation system(HLI). It is sure that risk indices of reliability of composite power system are larger than those of generation system. It is the reason that composite power system includes uncertainties and capacity limit of transmission lines. The characteristics and effectiveness of this methodology are illustrated by the case study using MRBTS.