• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.503-506
• /
• 2002

• 한국환경과학회지
• /
• 제22권2호
• /
• pp.163-171
• /
• 2013

The aggregate risk assessment on xylene and ethylbenzene was carried out according to the guidance established newly in 2010 with the purpose of providing information for risk management. In human exposure assessment, the results indicated that lower ages were exposed more and that, in the interior space at home, the highest level of human exposure occurred via inhalation. At outdoor spaces, exposures via inhalation and drinking were less than 1%. In human health risk characterization, xylene showed HI(Hazard Index) < 1 in all ages. When reasonable maximum exposure(RME) was applied, HI for young children was 0.64. The HI of ethylbenzene was also below 1(0.02~0.04) in all ages, indicating no potential risk. From this study, it is considered that xylene need to be continous monitoring with interest because this substance may be more sensitive on young age group. In additon, to reduce the uncertainty of the risk assessment, the korean exposure factors on young age group such as infant, children had to be established as soon as possible.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.747-756
• /
• 2012

The purpose of this study was to investigate adsorption characteristics of organo-clays for removal of p-xylene. As part of efforts to examine the adsorption capacities of some organo-clays for p-xylene, batch isotherm tests were carried out. Organo-clay minerals were synthesized under hydrothermal conditions using Na-montmorillonite as host clay and dimethyldioctadecylammonium (DMDA) bromide and benzyldimethyldodecylammonium (BDDA) chloride as organic surfactants, respectively. All synthetic organo-clay minerals were characterized by powder x-ray diffraction (XRD), scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDX). The modification using dimethyldioctadecylammonium (DMDA) bromide showed the higher adsorption ability for p-xylene than benzyldimethyldodecylammonium (BDDA) chloride. On the other hand, the maximum adsorption capacity, $Q_{max}$ of DMDA modified montmorillonite estimated by Langmuir model was 27.0 mg/g, which was the higher value than other organo-clays.

• 한국환경보건학회지
• /
• 제41권1호
• /
• pp.24-29
• /
• 2015

Objectives: The objective of this study was to identify determine factors for blood VOCs levels in college students. Methods: Venous blood samples were collected from healthy 29 male and 25 female volunteers. The samples were analyzed with solid-phase microextraction gas chromatography and mass spectrometry. Results: Blood concentrations of benzene, toluene, ethylbenzene, m-,p-xylene, o-xylene were higher in smoking group than in non-smoking group. Geometric means of smoking group and non-smoking group were 0.45 and $0.36{\mu}g/L$ in benzene, 0.82 and $0.47{\mu}g/L$ in toluene, 0.44 and $0.41{\mu}g/L$ in ethylbenzene, 0.49 and $0.39{\mu}g/L$ in m-,p-xylene and 0.47 and $0.43{\mu}g/L$ in o-xylene, respectively. Gender, alcohol drinking, coffee, commuting time (30 minutes) by a car and adjacency between home and road were not associated with increasing blood VOCs concentrations of college students. Conclusion: Smoking habit was significantly associated with blood concentrations of benzene, toluene, ethylbenzene, o-,m-,p-xylene in college students.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.45-52
• /
• 2006

The AITs(autoignition temperatures) describe the minimum temperature to which a substance must be heated, without the application of a flame or spark, which will cause that substance to ignite. The AITs are often used as a factor in determining the upper temperature limit for processing operations and conditions for handling, storage and transportation, and in determining potential fire hazard from accidental contact with hot surfaces. The measurement AITs are dependent upon many factors, namely initial temperature, pressure, volume, fuel/air stoichiometry, catalyst material, concentration of vapor, time lag. Therefore, the AITs reported by different ignition conditions are sometimes significantly different. This study measured the AITs of benzene, toluene and xylene isomers from time lag using AS1M E659-78 apparatus. The experimental ignition delay times were a good agreement with the calculated ignition delay times by the proposed equations wtih a few A.A.D.(average absolute deviation). Also The experimental AITs of benzene, toluene, o-xylene, m-xylene and p-xylene were $583^{\circ}C,\;547^{\circ}C,\;480^{\circ}C,\;587^{\circ}C,\;and\;557^{\circ}C$, respectively.

• 대한화학회지
• /
• 제22권6호
• /
• pp.380-385
• /
• 1978

진공미량저울을 사용하여 Spheron 6 위에서 o-크실렌의 여러 온도에서의 흡착등온곡선을 얻고 이들로 부터 BET 방법을 써서 흡착분자 단면적을 구하였다. 이 단면적의 값은 $-15^{\circ}C$까지에서는 변화가 없었고 -15와 $-14^{\circ}C$ 사이에서 갑자기 변하여 $-14^{\circ}C$ 이상의 온도에서는 다시 일정한 값을 유지하였다. 이 결과는 $-15^{\circ}C$ 보다 낮은 온도에서는 촘촘히 쌓인 편재흡착이 일어나고 $-14^{\circ}C$ 이상의 온도에서는 벤젠고리를 중심으로한 하나의 회전자유도를 얻는 것으로 생각된다.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.70-75
• /
• 2008

The values of the AIT(Autoignition temperature) for fire and explosion protection are normally the lowest reported. The minimum autoignition temperature behavior(MAITB) of flammable liquid mixtures is exhibited when the AIT of mixture is below the AIT of the individual components. The MAITB is an interesting experimental features, which can be significant from the perspective of industrial safety. In this study, the AITs of m-xylene+n-butyric acid and ethylbenzene+n-butanol systems were measured using ASTM E659-78 apparatus. The AITs of m-xylene, n-butyric acid, ethylbenzene and n-butanol which constituted two binary systems were $587^{\circ}C$, $510^{\circ}C$, $475^{\circ}C$ and $340^{\circ}C$ respectively. The m-xylene+n-butyric acid system is exhibited MAITB at 0.3 mole fraction of m-xylene, and its minimum autoignition temperature was $460^{\circ}C$.

• 한국시뮬레이션학회논문지
• /
• 제4권1호
• /
• pp.121-130
• /
• 1995

This paper deals with modeling and simulation of an industrial benzene-toluene-xylene plant. Because the fractionation unit of benzene-toluene-xylene plant has a narrow range of boiling point and doesn't have any sidecut and side reboiler, we employed boiling point estimation method in the modeling and simulation of the plant. Soave-Redlich-Kwong equation was used in the computation of thermodynamical properties. We solved resulting nonlinear equations by using Newton-Raphson method which is known to show fast convergence. Results of simulation showed good agreement with actual plant operation data.

• 한국환경과학회지
• /
• 제7권3호
• /
• pp.393-400
• /
• 1998

A microorganism, Klebsiella gr. 47, capable of degrading BTX(benzene, toluene and xylene) was isolated from oil-contaminated soil and its characteristics of BTX degradation were investigated. When benzene and toluene were fed to Klebstella gr. 47 simulataneously, they showed competitive ingibition. The degradation rate of xylene was enhanced as much as 3 times when xylene was fed with benzene or toluene. Degradation rate of benzene and toluene was also enhanced by cocultured with Alcaligenes xylosoxidans. When benzene-adapted microorganism was used, each BTX compound was degraded efficiently within 5 hours.

• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.369-373
• /
• 2002

The liquid phase oxidation of p-xylene has been carried out with oxygen-enriched gas, and the manganese component was precipitated probably via over-oxidation to $Mn^{4+}$. The precipitation increased with rising oxygen concentration in the reaction gas and occurred mainly in the later part of the oxidation. The activity of the reaction decreased, and the blackening of the product and side reactions to carbon dioxide increased with the degree of precipitation. Precipitation can be decreased with the addition of metal ions, such as cerium, chromium and iron.