• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.207-214
• /
• 2014

In this study, nano-scale copper powders were reduction treated in a hydrogen atmosphere at the relatively high temperature of $350^{\circ}C$ in order to eliminate surface oxide layers, which are the main obstacles for fabricating a nano/ultrafine grained bulk parts from the nano-scale powders. The changes in composition and microstructure before and after the hydrogen reduction treatment were evaluated by analyzing X-ray diffraction (XRD) line profile patterns using the convolutional multiple whole profile (CMWP) procedure. In order to confirm the result from the XRD line profile analysis, transmitted electron microscope observations were performed on the specimen of the hydrogen reduction treated powders fabricated using a focused ion beam process. A quasi-statically compacted specimen from the nano-scale powders was produced and Vickers micro-hardness was measured to verify the potential of the powders as the basis for a bulk nano/ultrafine grained material. Although the bonding between particles and the growth in size of the particles occurred, crystallites retained their nano-scale size evaluated using the XRD results. The hardness results demonstrate the usefulness of the powders for a nano/ultrafine grained material, once a good consolidation of powders is achieved.

• Carbon letters
• /
• 제21권
• /
• pp.33-50
• /
• 2017

In this study, Fe-Ni bimetallic catalyst supported on kaolin is prepared by a wet impregnation method. The effects of mass of kaolin support, pre-calcination time, pre-calcination temperature and stirring speed on catalyst yields are examined. Then, the optimal supported Fe-Ni catalyst is utilised to produce multi-walled carbon nanotubes (MWCNTs) using catalytic chemical vapour deposition (CCVD) method. The catalysts and MWCNTs prepared using the optimal conditions are characterized using high resolution transmission electron microscope (HRTEM), high-resolution scanning electron microscope (HRSEM), electron diffraction spectrometer (EDS), selected area electron diffraction (SAED), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET), and X-ray diffraction (XRD). The XRD/EDS patterns of the prepared catalyst confirm the formation of a purely crystalline ternary oxide ($NiFe_2O_4$). The statistical analysis of the variance demonstrates that the combined effects of the reaction temperature and acetylene flow rate predominantly influenced the MWCNT yield. The $N_2$ adsorption (BET) and TGA analyses reveal high surface areas and thermally stable MWCNTs. The HRTEM/HRSEM micrographs confirm the formation of tangled MWCNTs with a particle size of less than 62 nm. The XRD patterns of the MWCNTs reveal the formation of a typical graphitized carbon. This study establishes the production of MWCNTs from a bi-metallic catalyst supported on kaolin.

• Applied Microscopy
• /
• 제26권1호
• /
• pp.95-104
• /
• 1996

A comprehensive methodology to characterize the interfacial reaction products of $SiC_p/2024$ Al composites is introduced on the basis of the experimental results obtained using XRD, SEM and TEM. XRD performed on the electrochemically extracted $SiC_p$ and bulk $SiC_p/2024$ Al composite have shown that the interfacial reaction products consist of $Al_{4}C_3$ having hexagonal crystallographic structure, pure eutectic Si having diamond cubic crystallographic structure, and $CuAl_2$, having tetragonal crystalloraphic structure, respectively. According to the images observed by SEM, $Al_{4}C_3$, which has been reported to have needle shape, has a hexagonal platelet-shape and eutectic Si is found to have a dendritic shape. In addition eutectic $CuAl_2$, was observed to form near interface and/or along the grain boundaries. In order to confirm the results obtained by XRD, the primitive cell volume and reciprocal lattice height of such interfacial reaction products were calculated using the data obtained from convergent beam electron diffraction (CBED) patterns, and then compared with theoretical values.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.513-518
• /
• 2003

La/sub 2/3-x/Li/sub 3x/□/sub 1/3-2x/TiO₃ compounds with x=0.13 and 0.12 were prepared by slow cooling (x=0.13) and rapid quenching (x=0.12) into the liquid nitrogen after sintering at 1350℃ for 6 h. Their crystal structure has been determined by Rietveld refinement of both the powder neutron and X-ray diffraction data. From neutron diffraction data, we found that the main phase was not tetragonal (P4/mmm), but trigonal (R3cH). The refinement of neutron diffraction for the slow cooled samples were in a good agreement with a new model; a mixture of trigonal (R3cH, 45.7 wt％), tetragonal (p4/mmm, 37.0 wt％), and Li/sub 0.57/Ti/sub 0.86/O₂(pbnm, 17.2 wt%), but the quenched sample was found not to contain tetragonal (p4/mmm). X-ray diffraction data couldn't be well fitted because of the Poor scattering factor of lithium ions and the similar reflection patterns among trigonal (R3cH), tetragonal (p4/mmm), and cubic (Pm3m). We also knew that one transport bottlenecks is destroyed by one La vacancy in the case of trigonal (R3cH).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.75-80
• /
• 1999

In this study, clay sampled from Yangsan$.$Mulkum site were used to analyze mineral properties. Mineral and chemical properties of clay were investigated through X-ray fluorescence spectrometer(XRF), X-Ray Diffraction(XRD), and Scanning Electron Microscope(SEM) analysis. The result of this test represents that Yangsan$.$Mulkum clay are composed of quartz, albite, anorthite, orthocalse and illite.

• Journal of Pharmaceutical Investigation
• /
• 제37권1호
• /
• pp.23-26
• /
• 2007

Two crystal forms of cefuroxime axetil were obtained by the recrystallization from different organic solvents and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD). It was confirmed that two crystal forms are identical. The dissolution patterns of these two forms were also checked in 0.07 N HCl at $37{\pm}0.5^{\circ}C$, 100 rpm for 180 minutes. The transformation during storage was also studied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.995-998
• /
• 2003

This paper reports the correlation between dielectric constant and degree of amorphism of the hybrid type Si-O-C thin films. Si-O-C thin films were deposited by high density plasma chemical vapor deposition using bistrimethyl- silylmethane(BTMSM, $H_{9}$C$_3$-Si-C $H_2$-Si-C$_3$ $H_{9}$) and oxygen precursors with various flow rate ratio. As-deposited film and annealed films at 40$0^{\circ}C$ were analyzed by XRD. The Si-O-C thin films were amorphous from XRD patterns. For quantitative analysis, the diffraction pattern of the samples was transformed to radial distribution function by Fourier analysis, and then compared with each other. The degree of amorphism of annealed films was higher than that of as-deposited ones. The dielectric constant varied in accordance with flow rate ratio of precursors. The lowest dielectric constant was obtained from the as-deposited film which has the highest degree of amorphism after annealing.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1113-1119
• /
• 1998

Crystal structure of needle-shaped maghemite(${\gamma}$-{{{{ { {Fe }_{2 }O }_{3 } }}) has been studied by the Rieveld analysis of powder X-ray diffraction patterns. The tetragonal space group P41,.3212 and cubic space group P41,.32 have been have been used for the refinement of X-ray diffraction patterns. The crystal system of maghemite is closed to tetragonal more than cubic. The tetragonal lattice parameters are a=8.3460$\AA$ and c=25.034$\AA$ The standard X-ray diffraction pattern of the tetragonal maghemite analyzed with space group P41,.3212 is proposed.

• 한국진공학회지
• /
• 제18권4호
• /
• pp.245-253
• /
• 2009

InAs/GaSb (8/8-ML) 응력초격자 (SLS)의 성장 변수를 최적화하기 위하여, 다양한 조건 및 모드에서 SLS 구조를 제작하여 고분해능 X선회절 (XRD) 특성을 분석하였다. 본 연구에서는 성장온도, V/III 분자선 비율, 성장일시정지 (growth interruption, GI) 등의 변화를 통하여 SLS 계면층의 응력 변조를 유도하였고, XRD 0차 위성피크의 변위로서 응력의 변화를 고찰하였다. XRD 분석 결과로부터, SLS의 결정성과 응력의 변화를 유발하는 주요 변수는 각각 성장온도와 V/III(Sb/Ga) 비율임을 보여 주었다. 압축변형을 가지고 있는 본 연구에서 제작한 SLS 시료는 V/III(Sb/Ga) 비율의 감소에 따라 인장변형으로 전환됨을 보여 주었으며, GI 모드 및 시간에 따라 응력이 민감하게 변함을 관측할 수 있었다. 본 연구 결과로부터, [InAs/GaSb]-SLS ([8/8]-ML)의 최적 성장온도와 V/III(Sb/Ga) 비율는 각각 $350^{\circ}C$와 20이고, 결정성을 극대화하고 응력완화를 감소시키기 위해서는 InAs 성장 직전 약 3초 동안의 GI방법이 유효함을 보였다.

• 한국환경과학회지
• /
• 제28권6호
• /
• pp.553-559
• /
• 2019

In this study, zeolitic materials at $Na_2CO_3/CFA$ ratio of 0.6 - 1.8 were synthesized from coal fly ash from a thermal power plant using a fusion/hydrothermal method. The zeolitic materials were found to have cubic crystals structure and X-ray diffraction (XRD) peaks of Na-A zeolite by XRD and SEM analysis. When the zeolitic materials were synthesized from the coal fly ash, the XRD peaks of the zeolitic materials at $Na_2CO_3/CFA$ ratios of 0.9-1.8 had the same location as the XRD peaks of commercial Na-A zeolite. The XRD peaks of the Na-A zeolite ($Na_{12}Al_{12}Si_{12}O_{48}27.4H_2O$) were confirmed in the $2{\theta}$ in the range of 7.18-34.18. However, it was also confirmed that peaks of $CaCO_3$, an impurity inhibiting synthesis of Na-A zeolite from CaO and $Na_2CO_3$ in the coal fly ash, occurred in the XRD peaks of the zeolitic materials at $Na_2CO_3/CFA$ ratio of 1.5-1.8. The crystallinities of the zeolitic materials tended to increase gradually within the $Na_2CO_3/CFA$ ratio range of 0.6-1.8.