• Journal of the Microelectronics and Packaging Society
• /
• v.3 no.2
• /
• pp.39-50
• /
• 1996

본 연구에선 주어진 조성의 알루미나 green sheet에 대하여 텅스텐의 입경 및 산화 물의 조성을 변화시키므로써 수축률을 제어하여 camber를최소화하여 결합강도를 최대로 하 는 텅스텐 페스트조성을 찾아내는 것을 목적으로 하였다. 본 실험에서 사용한 텅스텐 분말 의 입경은 0.35$\mu$m, 0.6$\mu$m, 0.72$\mu$m, $1.5\mu$m, 1.9$\mu$m, 3.2$\mu$m이며 frit는 Al2O3, MgO, SiO2 와 Al2O3, CaO, SiO2를 사용하여 각각의 조성에 따라 함량을 변화시키며 실험하였다. 소성 은 154$0^{\circ}C$로 습윤 수소분위기에서 시행하였으며 사용된 알루미나 green sheet의 알루미나 중심 입경은 2.8$\mu$m이었다. 분석은 주사전자 현미경으로 미세구조를 관찰하였고 EPMA Line Profile로 원소 분석을 하였으며 잔류응력을 측정하기 위하여 XRD분석을 하였다. Frit 을 함유하지 않은 경우 텅스텐 분말의 입경이 1.9$\mu$mdlfEo 최대 접합 강도를 나타내었다. Frit을 함유한 경우 Mgo계 frit조성에서는 MgO/Al2O3/SiO3=1/1/1일 때 CaO계 frot 조성에 서는 CaO/Al2O3/SiO2=1/2/1일 때 최대 접합 강도를 나타내었다. Frit 함량을 변화시킨 경우 MgO계는 10wt%함유하였을 때 CaO 계는 5wt%함유하였을 때 최대 접합강도를 나타내었 다. Frit 함량을 변화시킨 경우 MgO계는 10wt%함유하였을 때, CaOr계는 5wt%함유하였을 때 최대 접합강도를 나타내었다.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.505-511
• /
• 2009

Water soluble ZnS nanocrystals were synthesized by capping the surface of the nanocrystals with valine and alanine molecules, which are structurally simple and bio friendly amino acids. The obtained ZnS nanocrystal powders were characterized by XRD, HR-TEM, and EDXS spectroscopies. The measured particle sizes by HR-TEM images were in the range of 3.3 to 3.6 nm. In addition, the surface capping amino acids molecules were characterized by FT-IR and FT-Raman spectroscopies.

• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.325-334
• /
• 2004

Detail downward variation records for paleomagnetic, XRD, photospectrogram, TOC results were obtained from the soil developed along the Hantan River, Gungpyeong-ri, Cheongsan-myeon, Yeoncheon-gun Gyeonggi-do. The unconsoildated sediments underlain by the Jeongok Quaternary Basalt indicates that the paleosol formed twice with different ages, as apparently indicated by sedimentological, paleomagnatic, and soil chemical properties. The paleosols recorded paleoclimate and paleoenvironments of about 271.21$\pm$89.8 ka before eruption of the Quaternary Jeongok Basalt.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.385-392
• /
• 2021

In this study, impact of Co proportion and calcination temperature of ceria on the Co/CeO₂ was analyzed by comparing nitrogen monoxide oxidation performance of various catalysts and their physico-chemical properties. The structural properties of each catalyst were studied by XRD and BET analysis, and the surface crystal states of cobalt were proposed according to the surface density. Oxidation states of elements were observed through Raman and XPS analysis, and the relationship between typical oxidation states and nitrogen monoxide oxidation performance was designed. Through H₂-TPR, oxygen-transferring capacity due to changes in the characteristics of catalysts were identified, and activation sites (Co³⁺) for oxidation were suggested.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.287-301
• /
• 2019

Preservation of the original form is the principle for conservation, management and utilization of cultural heritages. Thus, non-destructive analysis of these samples are important field of the conservation science. In this study, examined the applicability of nondestructive surface X-ray diffraction analysis (ND-XRD) for cultural heritage by materials (rock specimen, jade stone, pigment painted specimen, earthen artifact, metal artifact). In result, all type of sample is recorded suitable X-ray diffraction patterns for identifying mineral composition in case of surface condition with adequate particle size and arrangement. And diffraction pattern is reflected surface information than matrix. Therefore, ND-XRD is thought to be applicable not only mineral identification but also interpretation of manufacturing technique and alteration trend about layered sample (in horizontally or vertically). Whereas some exceptional diffraction patterns were recorded due to overlapping information on specific crystal planes. It caused by skip the sample treatment (powdering and randomly orientation). It could be advantageously used for mineral identification, such as preferred orientation of clay minerals. In contrast, irregular diffraction pattern caused by single crystalline effect is required careful evaluation.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.304-309
• /
• 2012

National Institute of Environmental Research has Portable FT-IR(Fourier Transform Infrared Spectroscopy, A2 Technologies, U.S.A.) and Portable XRD(X-ray Diffraction, Olympus Innov-X co., U.S.A.) for the analysis of the solid sample rapidly on the spot where chemical terror accident took place and the portable equipments are operating now. However, we need a series of the analysis procedures for an efficient application of the equipments and getting the rapid analytical value about the investigation and sampling on the spot. And the accuracy of the portable equipments' analytical value is high but the application of them in an emergency is low because we are lack of the procedures about field-centered analysis and the usage. Therefore we would like to organize the result of this research about field analysis and the procedures of the solid portable equipments. And we also would like to apply it to the field of chemical terror accident.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.479-492
• /
• 2019

Purpose: The purpose of this study is to accurately analyze the damage of bridges in order to determine whether fire bridges can be used continuously or to provide information on maintenance augmentation data. Method: XRD, SEM and EDS analyzes of concrete were carried out to estimate the fire temperature transferred to the structure, and analyzed by depth and area from PSCI beam and bottom plate concrete surface. Results: Test results G_12,11 for the fire zone concrete were confirmed to be affected by heat up to depth of 60mm and the temperature of the hydrothermal heat was above 1000℃. Also, the girder G_10,9,8 was relatively weakly damaged compared to G_12,11, and the degree of damage was confirmed to be affected by heat up to a depth of 40 mm. Conclusion: Based on the analyzed data, it is considered that if the repair / reinforcement and periodic inspection are carried out, the bridge can secure sufficient safety even considering the damage caused by the fire.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1188-1195
• /
• 1999

This study was conducted to determin basic mineral compositions, chemical components, description of particle size distribution and whiteness for 32 items of insoluble mineral substances, i.e., 3 items of diatomaceus earth, 1 item of kaolin, 10 items of bentonite, 13 items of acid clay, 3 items of talc and 2 items of perlite. The chemical components and XRD (X-Ray diffractometer) for insoluble mineral substances, were similar with those of the reported references except kaolin. However, whiteness was determined in 90% level for talc, diatomaceus earth and kaolin. The contents of heavy metals in insoluble mineral substances were determined as follows : Pb, $nd{\sim}23.10$ ppm ; Cd, $nd{\sim}0.67$ ppm ; Hg, $nd{\sim}0.58$ ppm ; As, $nd{\sim}1.42$ ppm ; Cu, $nd{\sim}39.35$ ppm. These data were significanty lower than the references.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.183-187
• /
• 2010

Activated carbons (ACs) have been prepared from pitch by the combination of a chemical oxidation with different $H_2O_2$ concentrations i.e., 5, 15, and 25 wt% and a chemical activation with KOH at a constant KOH/pitch ratio of 3/1. The influence of $H_2O_2$ solution on the microporous properties of the pitch and the final activated carbons were invested using XRD, FT-IR, XPS, $N_2$-adsorption, and SEM. XRD indicated that the value of interplanar distance $d_{002}$ increased by chemical oxidation. FT-IR and XPS results showed that the chemical oxidation promoted the formation of surface oxygen functionalities. Also, the specific surface area of the resulting ACs was increased with increasing the concentration of $H_2O_2$ chemical oxidation and showed a maximum value of $2111m^2/g$ at 25 wt% $H_2O_2$ concentration.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.12-17
• /
• 2007

The effects of the evaporation rate of MgO films using an electron beam on the MgO properties and the discharge characteristics of a plasma display panel(PDP) were investigated and analyzed. Mgo films were deposited with the various MgO evaporation rates. The MgO properties such as the crystal orientation, the surface roughness, and the film structure, were inspected using XRD(X-ray diffractometry), AFM(atomic force microscopy). From the experiments and Paschen law, the maximum value of the secondary, electron emission coefficient $(\gamma)$ was obtained at the evaporation rate of $5\AA/sec$. The minimum firing voltage and the maximum luminous efficiency were obtained at an evaporation rate of $5\AA/sec$. In the MgO film deposited at $5\AA/sec$, the (200) orientation and $F^+$ center were most intensive. The XRD results and cathode-luminescence(CL) spectra show the $\gamma$ values are correlated with $F/F^+$ centers of the molecular structure of MgO films.