• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.139-140
• /
• 2015

Zn/HA coating on the Ti-xNb alloys after nanotube formation for dental lmplant was researched using various experimental methods. Due to g ood biocompatibility and osteoconductivity, hydroxyapatite (HA) coating s on metallic biomedical implants were widely employed in orthopedic and dental applications. To improve biocompatibilities, Zinc (Zn) plays very important roles in the bone formation and immune reg ulations. The nanotube formed Zn-HA films were characterized with X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS).

• The Journal of Internal Korean Medicine
• /
• v.41 no.5
• /
• pp.734-739
• /
• 2020

Objectives: The purpose of this study was to propose a diagnostic method for classifying patients with dyspepsia by symptom type. The correlation between symptom types and X-ray findings was studied in 62 patients with indigestion. Methods: In this study, the complaints and abdominal X-ray findings were collected for 62 patients who visited the outpatient Korean medicine clinic. The medical information related to dyspepsia was grouped for similar patients and classified by symptom type. Results: The patients with dyspepsia were classified into three types according to their medical symptoms: Distention type (N=43, 68.3%), Abdominal Pain type (N=16, 25.5%), and Constipation type (N=12, 19.0%). Intestinal fecal findings (80.6%) on x-rays were noted in most of the cases, followed by intestinal gas pattern findings (14.5%). Conclusion: Classifying patients with dyspepsia by symptom types is an appropriate diagnostic method due to the unclear pathophysiology of indigestion and the difficulty in applying a Korean medical dialectic. Irrespective of the symptom types, the large number of fecal material findings (80.6%) on x-rays means an effect on the interior environment of the body where intestinal feces accumulate easily and decreased gastrointestinal motility in patients with indigestion. This can be correlated with "food accumulation (食積)" as intestinal feces are tangible substances. In addition, gas in the intestine increases visceral sensitivity, causing abdominal distention or pain. The gas pattern findings (14.5%) on x-ray were observed in the "Distention type" and "Abdominal pain type," but not in the "Constipation type."

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.10 no.1
• /
• pp.57-61
• /
• 1980

In dental roentgenograph it is of mutual benefit to the patient and the dentist to use the minimum amount of radiation capable of producing roentgenograms with maximum interprtive informations. Recent increases in the number of diagnostic x-ray examinations made in this country have caused attention to be paid to the quantity of radiation delivered to the population and operator. The purposes of this study was to assess the quality of dental x-ray units, the amount of films, the average processing procedures and the radiation protection methods in korea. The results were as following: 1. Most of radiation generating system were used in low voltage such as 60Kvp, 10㎃. 2. High sensitivity films such as 'D' group of Kodak or Rinn were mainly used and average 14.7 films used per weeks. 3. Some dentists practiced visual processing technic in simple dark room, and others used instant films. 4. 68.26% of patient held the film themselves, but 27.30% were assisted by dentists film holding. 5. In radiation protection method, 7.85% of dentists had protection equipments such as protective barrier, 2.73% wore protective apron, 27.9% made it a rules to avoid beam, and 7.51% used to maintain a distance from the radiation source.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.26-32
• /
• 2017

Background: Ionizing radiation is known to be harmful to human health. The shielding of ionizing radiation depends on the attenuation which can be achieved by three main rules, i.e. time, distance and absorbing material. Materials and Methods: The mass attenuation coefficient, linear attenuation coefficient, Half Value Layer (HVL) and Tenth Value Layer (TVL) of X-rays (32 keV, 74 keV) and gamma rays (662 keV) are measured in Barium compounds. Results and Discussion: The measured values agree well with the theory. The effective atomic numbers ($Z_{eff}$) and electron density (Ne) of Barium compounds have been computed in the wide energy region 1 keV to 100 GeV using an accurate database of photon-interaction cross sections and the WinXCom program. Conclusion: The mass attenuation coefficient and linear attenuation coefficient for $BaCO_3$ is higher than the $BaCl_2$, $Ba(No_3)_2$ and BaSO4. HVL, TVL and mean free path are lower for $BaCO_3$ than the $BaCl_2$, $Ba(No_3)_2$ and $BaSO_4$. Among the studied barium compounds, $BaCO_3$ is best material for x-ray and gamma shielding.

• Journal of Radiation Protection and Research
• /
• v.46 no.3
• /
• pp.120-126
• /
• 2021

Background: This paper aims to evaluate the clinical utility and radiation dosimetry, for the mobile X-ray imaging of patients with known or suspected infectious diseases, through the window of an isolation room. The suitability of this technique for imaging coronavirus disease 2019 (COVID-19) patients is of particular focus here, although it is expected to have equal relevance to many infectious respiratory disease outbreaks. Materials and Methods: Two exposure levels were examined, a "typical" mobile exposure of 100 kVp/1.6 mAs and a "high" exposure of 120 kVp/5 mAs. Exposures of an anthropomorphic phantom were made, with and without a glass window present in the beam. The resultant phantom images were provided to experienced radiographers for image quality evaluation, using a Likert scale to rate the anatomical structure visibility. Results and Discussion: The incident air kerma doubled using the high exposure technique, from 29.47 µGy to 67.82 µGy and scattered radiation inside and outside the room increased. Despite an increase in beam energy, high exposure technique images received higher image quality scores than images acquired using lower exposure settings. Conclusion: Increased scattered radiation was very low and can be further mitigated by ensuring surrounding staff are appropriately distanced from both the patient and X-ray tube. Although an increase in incident air kerma was observed, practical advantages in infection control and personal protective equipment conservation were identified. Sites are encouraged to consider the use of this technique where appropriate, following the completion of standard justification practices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.164-164
• /
• 2000

Since Au-Pt alloys have various atomic structures depending upon composition and annealing temperature, it is very interesting to investigate the electronic structures of alloys. We studied the changes of the electronic structure I the Au-Pt alloys by x-ray absorption near edge spectroscopy (XANES). Two kinds of Au-Pt alloy samples were prepared by arc melting methods and ion-beam-mixing technique. The Pt L2, 3-edge and Au L2, 3-edge X-ray absorption spectra (XPS) were measured with the electron yield mode detector at the 3C1 beam line of the Pohang Light Source (PLS). It was found that there was a substantial decrease in the area of the Pt L2, 3 white lines compared with that of pure Pt. The observed decrease in white line area was attributed to an increase in the number of pure Pt. The observed decrease in white line area was attributed to an increase in the number of 5d-electrons at the Pt site upon alloy formation. However, the Au L2, 3 edge spectra for Au-Pt alloys are all similar to that of pure Au. This implies that the 5d hole count of Au is not changed by alloy formation with Pt.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2291-2297
• /
• 2012

X-ray fluorescence sprectrum signal include the continuum. XRF analysis the components of material by the amplitude of peaks. XRF remove the noise and background. To remove the noise, we apply the smoothing filter. And background removal methods applied such as SNIP, Morphology, Threshold methods. In this paper, we applied Threshold using DWT. Interval threshold method divide the some blocks in particular levels. We propose the method that is divided the particular level.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.184-188
• /
• 2002

The Cu/Ni/Cu(002)/Si(100) films which have perpendicular magnetic anisotropy were deposited by e-beam evaporation methods. From the reflection high energy electron diffraction pattern, the films were confirmed to be grown epitaxially on silicon. After 2X lots ions/$\textrm{cm}^2$ C+ irradiation, magnetic easy-axis was changed from surface normal to in-plane as shown in the hysteresis loop of magneto-optical Kerr effects. It became manifest from analysis of X-ray reflectivity and grazing incident X-ray diffraction that even though interface between top Cu layer and Ni layer became rougher, the contrast of Cu and Ni's electron density became manifest after ion irradiation. In addition, the strain after deposition of the films was relaxed after ion irradiation. Strain relaxation related with change of magnetic properties and mechanism of intermixed layer's formation was explained by thermo-chemical driving force due to elastic and inelastic collision of ions.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.487-492
• /
• 2014

Purpose: This study relates to the development of the 3X scope, whose objective part is configured with a doublet + a meniscus lens. Methods: By the initial condition of the objective part having a configuration of a doublet + a singlet, we could optimize the optical system of scope in order to minimize the finite ray aberrations of the objective part and the whole optical system of scope, and so we could develope a new type 3X scope. Results: On the condition of the objective part having a configuration of a doublet + a singlet, when the optical system of scope was optimized in order to minimize the finite ray aberrations, we could find that the singlet became the meniscus type lens having the concave shape to the direction of the doublet, and the longer the distance between the doublet and the meniscus lens is, the more the finite ray aberrations are minimized. Conclusions: In this study, we could develope a new type 3X scope of which finite ray aberrations can be reduced to 1/14 than the existing scope by adopting the objective part of the 3X scope having a configuration of three lenses composed of a doublet + a singlet. We could confirm that this reduction of aberrations can be a means to increase the effective aperture than the existing scope and to shorten the length of the optical system.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.4
• /
• pp.177-185
• /
• 2014

Objectives This study analyzed the correlation between body parameters measured using X-ray and Chuna posture analysis system to determine their clinical value in diagnosing and evaluating skeletomuscular diseases. Methods X-ray and Chuna posture analysis system were performed for 105 patients to measure physical characteristics such as Interacromial angle, Pelvic obliquity angle, Structural leg length discrepancy (SLLD), Midpatella-midtalus angle (MMA) and Q-angle, Anterior head translation (AHT), Anterior superior iliac spine to posterior superior iliac spine angle (ASIS-PSIS angle), Interscapular angle, Scoliotic angle and Cobb's angle. Statistical analysis using statistical analysis techniques and Pearson correlation coefficients was performed to assess the body parameters obtained by X-ray and Chuna posture analysis system. Results Significant correlations were observed between the values for Interacromial angle, Pelvic obliquity angle, SLLD, MMA and Q-angle, AHT, ASIS-PSIS angle, Interscapular angle, Scoliotic angle and Cobb's angle obtained by X-ray and Chuna posture analysis system. Significant correlations were also observed between right MMA and left Q-angle as well as between left MMA and right Q-angle. Conclusions Chuna posture analysis system can be used instead of X-ray measure body parameters and perform posture analysis in clinical practice. This study's findings are expected to serve as a basis for further research on the clinical application of Chuna posture analysis system.