• 폴리머
• /
• 제26권1호
• /
• pp.128-138
• /
• 2002

종양부위 또는 종양을 수술로 제거한 부위에 직접 이식하여 항암제를 투여함으로써 종양 또는 종양재발을 억제하는 악성뇌종양치료에 이용하기 위한 국소서방성 항암제제로서 항암제 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, Carmustine)가 함유된 poly(D,L-lactide-co-glycolide) (PLGA, 락타이드와 글리콜라이드 몰비 75 : 25) 미분말을 제조하여 웨이퍼로 성형하였다. BCNU가 함유된 PLGA 미분말은 분사건조법에 의해 제조하였으며 주사전자현미경으로 관찰한 결과 제조된 미분말은 미립구의 형태를 나타내었다. XRD와 DSC를 통하여 PLGA에 포접된 BCNU의 결정성이 현저히 감소하였음을 확인하였다. 생체외 방출시험조건에서 BCNU의 방출경향은 PLGA의 분자량 및 농도, BCNU의 함량 등에 의존하였으며 초기 burst effect 이후 거의 0차 방출의 경향으로 8주 이상 지속적인 방출경향을 나타내었다. 방출시험기간 동안 웨이퍼의 형태변화를 관찰하고 방출시험액의 pH 변화를 측정함으로써 BCNU의 함량이 증가할수록 PLGA의 수화와 분해가 촉진됨을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.817-821
• /
• 2008

We have investigated the influence of the crystal structure on the chemical bonding nature and photocatalytic activity of cubic and hexagonal perovskite A[$Cr_{1/2}Ta_{1/2}$]O3 (A = Sr, Ba) compounds. According to neutron diffraction and field emission-scanning electron microscopy, the crystal structure and particle size of these compounds are strongly dependent on the nature of A-site cations. Also, it was found that the face-shared octahedra in the hexagonal phase are exclusively occupied by chromium ions, suggesting the presence of metallic (Cr-Cr) bonds. X-ray absorption and diffuse UV-vis spectroscopic analyses clearly demonstrated that, in comparison with cubic Sr[$Cr_{1/2}Ta_{1/2}$]$O_3$ phase, hexagonal Ba[$Cr_{1/2}Ta_{1/2}$]$O_3$ phase shows a decrease of Cr oxidation state as well as remarkable changes in interband Cr d-d transitions, which can be interpreted as a result of metallic (Cr-Cr) interactions. According to the test of photocatalytic activity, the present semiconducting materials have a distinct activity against the photodegradation of 4-chlorophenol. Also the Srbased compound was found to show a higher photocatalytic activity than the Ba-based one, which is attributable to its smaller particle size and its stronger absorption in visible light region.

• Corrosion Science and Technology
• /
• 제19권2호
• /
• pp.82-88
• /
• 2020

This work examined the corrosion protection performance of benzoate loaded hydrotalcite/graphene oxide (HT/GO-BZ) for carbon steel. HT/GO-BZ was fabricated by the co-precipitation method and characterized by infrared spectroscopy, X-ray diffraction, and scanning electronic microscopy. The corrosion inhibition action of HT/GO-BZ on carbon steel in 0.1 M NaCl solution was evaluated by electrochemical measurements. The benzoate content in HT/GO-BZ was determined by UV-Vis spectroscopy. Subsequently, the effect of HT/GO-BZ on the corrosion resistance of the water-based epoxy coating was investigated by the salt spray test. The obtained results demonstrated the intercalation of benzoate and GO in the hydrotalcite structure. The benzoate content in HT/GO-BZ was about 16%. The polarization curves of the carbon steel electrode revealed anodic corrosion inhibition activity of HT/GO-BZ and the inhibition efficiency was about 95.2% at a concentration of 3g/L. The GO present in HT/GO-BZ enhanced the inhibition effect of HT-BZ. The presence of HT/GO-BZ improved the corrosion resistance of the waterborne epoxy coating.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.48-53
• /
• 2014

This study was carried out to investigate the effect of postweld heat treatment(PWHT, 930, 1080, $1230^{\circ}C$) on the microstructure, phase formation, pitting corrosion and mechanical properties such as hardness, tensile strength and impact values of super duplex stainless steel(UNS S32750) multipass welds. Based on the microstructural examination and X-ray diffraction analysis, it was found that the ${\sigma}$ phase was formed in the welds heat treated at $930^{\circ}C$ in which the ferrite content greatly decreased into 5~10% in the welds. The secondary austenite was formed in the reheated zone of welds and redissolved into ferrite with increasing heat treatment temperatures. The tensile strength and impact values of welds heat treated at $930^{\circ}C$ were the lowest and revealed the brittle fracture surface. The weight loss by pitting corrosion increased with test temperatures. It was confirmed that pitting corrosion occurred mainly in secondary austenite of reheated zones. The postweld heat treatment temperature is recommended to be in the range of $1050{\sim}1150^{\circ}C$.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.316-321
• /
• 2018

Composites of P25 $TiO_2$ and hexagonal $WO_3$ nanorods are synthesized through ball-milling in order to study photocatalytic properties. Various composites of $TiO_2/WO_3$ are prepared by controlling the weight percentages (wt%) of $WO_3$, in the range of 1-30 wt%, and milling time to investigate the effects of the composition ratio on the photocatalytic properties. Scanning electron microscopy, x-ray diffraction, and transmission electron microscopy are performed to characterize the structure, shape and size of the synthesized composites of $TiO_2/WO_3$. Methylene blue is used as a test dye to analyze the photocatalytic properties of the synthesized composite material. The photocatalytic activity shows that the decomposition efficiency of the dye due to the photocatalytic effect is the highest in the $TiO_2/WO_3$ (3 wt%) composite, and the catalytic efficiency decreases sharply when the amount of $WO_3$ is further increased. As the amount of $WO_3$ added increases, dye-removal by adsorption occurs during centrifugation, instead of the decomposition of dyes by photocatalysts. Finally, $TiO_2/WO_3$ (3 wt%) composites are synthesized with various milling times. Experimental results show that the milling time has the best catalytic efficiency at 30 min, after which it gradually decreases. There is no significant change after 1 hour.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.253-259
• /
• 2015

The test equipment becomes more important with the development of semiconductor industry. MEMS probe is an important testing component to detect the defects from the generated electric signal when it contacts the metal pad of semiconductor devices. Ni-Pd alloy has been paid attention to as a candidate of MEMS probe material because of its high surface hardness and relatively low resistivity. In this study, electroplated Ni-Pd alloy has been prepared by using ethylene diamine as a complexing agent. Solid solution alloy coating could be formed when concentration of palladium chloride and current density were in the ranges of 1~5 mM and $0.2{\sim}1.5A/dm^2$, respectively. The increase of current density brought about an decrease in palladium content, which made both of lattice parameter and grain size smaller. As a result of grain refinement, high hardness could be obtained. However, surface cracking was observed due to residual stress when the current density was above $1.3A/dm^2$. When effects of heat treatment temperature on hardness and sheet resistance were investigated, the accompanied grain growth decreased both of them. The decrease of hardness remained stable at a temperature of $200^{\circ}C$. The sheet resistance was drastically reduced at $100^{\circ}C$. After that, it was found to become constant.

• 한국표면공학회지
• /
• 제46권1호
• /
• pp.1-8
• /
• 2013

Cathodic current on a metal tends to increase the $OH^-$ neighboring to the metal surface, especially during electro-deposition in seawater. The increased pH at metal/seawater interface results in precipitation of brucite crystal structure-$Mg(OH)_2$ as following formula; $Mg^{2+}+2OH^-{\rightarrow}Mg(OH)_2$, that is typical mechanism of the main calcareous deposits-compound in electro deposited coating films. In this study, the effects of anode and current density on deposition rate, composition structure and morphology of the deposited films were systematically investigated by scanning electron microscopy(SEM) and x-ray diffraction(XRD), respectively in order to overcome the problems such as deposition rate and a weak adhesion between deposit film and metal surface. The adhesion and corrosion resistance of the coating films were also evaluated by anodic polarization test. The electro-deposited film formed by using AZ31-Mg anode had the most appropriate physical properties. Weight gain of electro-deposit films increased with increasing cathodic current. Electro-deposit prepared at $5A/cm^2$ current density shows better adhesion than that formed at $8{\sim}10A/cm^2$.

• Corrosion Science and Technology
• /
• 제19권1호
• /
• pp.16-22
• /
• 2020

It is important to realize that benzoate was intercalated into hydrotalcite (HTC-Bz) by the co-precipitation method. In this case, acrylic coating with 0.5 wt% HTC-Bz was deposited on carbon steel using the spin coating method. Next, the HTC-Bz structure was characterized by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). In fact, an ultraviolet vision spectroscopy (UV-Vis) was used to determine the benzoate content in HTC-Bz, and the UV absorption ability of HTC-Bz. Using electrochemical techniques, water contact angle measurement, and thermal-gravimetric analysis, we compared the protective properties before and after QUV test, hydrophobicity and the thermal stability of acrylic coating containing HTC-Bz. The obtained results showed that HTC-Bz with a plate-like structure was successfully synthesized; benzoate was intercalated into the interlayer of hydrotalcite with a concentration of 28 wt%. Additionally, it was noted that HTC-Bz has an UV absorption peak at 225 nm. In conclusion, the addition of HTC-Bz enhanced the UV stability, hydrophobicity and the thermal stability of acrylic coating.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.341-346
• /
• 2010

이종 접합재($\beta-Si_3N_4/S45C$)의 굽힘강도와 인장강도에 미치는 시험편 형상의 영향을 정량적으로 평가하였다. 평균 굽힘강도와 평균 인장강도는 원형단면 시험편이 4각형 단면 시험편보다 약간 높았다. 또한, 초음파(AE)를 이용하여 균열발생응력을 성공적으로 측정할 수 있었으며, 균열발생응력은 굽힘강도의 60~80% 이었다. 아울러, 세라믹측 접합계면 근처의 잔류응력 측정을 굽힘강도 시험전에 X선 회절법에 의해 실시하였으며, 굽힘강도와 균열발생응력은 잔류응력 증가와 더불어 감소하였다. 마지막으로 인장시험에서 굽힘변형률 성분의 영향을 평가하였으며, 인장강도는 굽힘변형률 성분의 증가와 더불어 감소하고 굽힘강도의 약 80%에 해당되었다.

• 청정기술
• /
• 제22권2호
• /
• pp.82-88
• /
• 2016

코크에 의한 촉매의 불활성화는 산업현장에서 촉매가 사용되는 동안 매우 중요하다. 본 연구에서는 프로판 탈수소 반응을 위한 Pt-Sn 촉매에서 반응조건인 수소의 비율이 코크생성에 미치는 영향과 코크버닝에 의한 촉매 활성의 회복여부, 그리고 코크양에 따른 코크버닝 중의 백금소결여부, Pt-Sn-K 촉매에서 Sn의 함량이 코크생성과 불활성화에 미치는 영향을 확인하고자 하였다. Pt-Sn-K는 Pt와 Sn, K를 순차적으로 각각 θ-알루미나와 γ-알루미나에 담지 하여 제조하였다. 프로판 탈수소 반응은 먼저 반응물중의 수소비를 달리하여 620 ℃에서 수행한 후, 코크버닝을 통해 재생하고 다시 프로판 탈수소 성능을 비교하였다. 재생촉매의 B.E.T 분석과 코크분석, XRD (X-ray diffraction)와 같은 물리분석을 동시에 수행하였다. 촉매의 활성테스트와 특성분석을 통하여 반응물 상에서 수소의 비와 촉매의 Sn함량이 촉매표면의 코크 형성에 영향을 줄 수 있다는 것을 알 수 있다. 또한, 과량의 코크는 Air 재생 과정에서의 백금입자의 소결을 일으키고 촉매의 활성을 저하시킬 수 있다.