• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.26-27
• /
• 1994

The first step implementation of a hospital-wide Picture Archiving Communications System (PACS) at a newly built hospital Samsung Medical Center (SMC), is described. Current clinical operation encompasses the fiber optics delivery of direct-interfaced magnetic resonance imager (LRI), X-ray computed tomography (CT). digital subtraction angiography (DSA) and computed radiography (CR) digital images via high performance file server to the departments of radiology, neurosurgery, orthopedics surgery, neurology, emergency room and the surgical intensive care unit.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.113-117
• /
• 2016

Temperature dependent reverse-bias current-voltage (I-V) characteristics in Cu Schottky contacts to oxygen plasma treated n-InP were investigated. For untreated sample, current transport mechanisms at low and high temperatures were explained by thermionic emission (TE) and TE combined with barrier lowering, respectively. For plasma treated sample, experimental I-V data were explained by TE or TE combined with barrier lowering models at low and high temperatures. However, the current transport was explained by a thermionic field emission (TFE) model at intermediate temperatures. From X-ray photoemission spectroscopy (XPS) measurements, phosphorus vacancies (VP) were suggested to be generated after oxygen plasma treatment. V_P possibly involves defects contributing to the current transport at intermediate temperatures. Therefore, minimizing the generation of these defects after oxygen plasma treatment is required to reduce the reverse-bias leakage current.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.26-33
• /
• 1994

Phase retrieval is concerned with the reconstruction of a signal from its Fourier transform magnitude (or intensity), which arises in many areas such as X-ray crystallography, optics, astronomy, or digital signal processing. In such areas, the Fourier transform phase of the desired signal is lost while measuring Fourier transform magnitude (F.T.M.). However, if a reference 'signal is added to the desired signal, then, in the Fourier trans form magnitude of the added signal, the Fourier transform phase of the desired signal is encoded. This paper addresses uniqueness and retrieval of the encoded Fourier phase of a multidimensional signal from the Fourier transform magnitude of the added signal along with the Fourier transform magnitude of the desired signal and the information of the additive reference signal. In Part I, several conditions under which the desired signal can be uniquely specified from the two Fourier transform magnitudes and the additive reference signal are presented. In Part II, the development of non-iterative algorithms and an iterative algorithm that may be used to reconstruct the desired signal(s) is considered.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.34-41
• /
• 1994

Phase retrieval is concerned with the reconstruction of a signal from its Fourier transform magnitude (or intensity), which arises in many areas such as X-ray crystallography, optics, astronomy, or digital signal processing In such areas, the Fourier transform phase of the desired signal is lost while measuring Fourier transform magnitude (F.T.M.). However, if a reference 'signal is added to the desired signal, then, in the Fourier trans form magnitude of the added signal, the Fourier transform phase of the desired signal is encoded This paper addresses uniqueness and retrieval of the encoded Fourier phase of a multidimensional signal from the Fourier transform magnitude of the added signal along with Fourier transform magnitude of the desired signal and the information of the additive reference signal In Part I, several conditions under which the desired signal can be uniquely specified from the two Fourier transform magnitudes and the additive reference signal are presented In Part II, the development of non-iterative algorithms and an iterative algorithm that may be used to reconstruct the desired signal (s) is considered

• Proceedings of the Korean Magnestics Society Conference
• /
• 2014.05a
• /
• pp.146-147
• /
• 2014

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.99-100
• /
• 2013

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.153-156
• /
• 2003

Pure and Ethylenediaminetetraacetic acid (EDTA) doped L-arginine phosphate (LAP) single crystals were grown from the aqueous solution by temperature lowering method. The effect of EDTA additive on the solubility and metastable zone width of LAP solution has been investigated. Addition of EDTA has enhanced the metastable zone width of LAP and hence bulk crystals could be grown. The growth rate along the [100] direction increases with EDTA additive. Powder X-ray diffraction and FTIR studies reveal the absence of EDTA in the lattice of LAP, This reveals that the addition of EDTA to LAP doesn't influence the crystallinity. However, the transmittance and NLO properties significantly increase with EDTA additive and hence bulk LAP crystals are useful for laser fusion experiments.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.139.1-139.1
• /
• 2008

• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.413-419
• /
• 2022

An oxyfluoride glass ceramic containing Eu²⁺-doped nepheline and LaF₃ crystals was modified, with BaF₂ replacing LaF₃ up to 20 mole percent, and its luminescence change was monitored. With increasing BaF₂ content, the greenish yellow emission centered at 540 nm under 400-nm excitation decreased, and a new afterglow emission from the modified ceramic was observed after removal of the excitation light source. X-ray diffraction (XRD) and transmission electron microscopy with energy dispersive spectroscopy (TEM-EDS) were used to investigate the changes in the crystalline phases within the glass matrix. Time dependent emission intensity was monitored to observe the afterglow, and the possible mechanism for the afterglow due to BaF₂ addition was considered.

• Ceramist
• /
• v.10 no.3
• /
• pp.67-74
• /
• 2007

Crystallisation kinetics of the erbium doped soda-tellurite glasses were studied using the differential thermal analysis (DTA) and differential scanning calorimetery (DSC) techniques. The DTA curves in the temperature range of 350 K to 650 K were obtained from isochronal heating rates, chosen in the range of 2 to 20 K/min. DSC isothermal curves were used to calculate the fraction of crystals formed on reheating. The apparent activation energies for devitrification were derived by measuring the shifts in the values of $T_g$ and $T_x$ with heating rates, using the Kissinger method. The derived values of apparent activation energies for isochronal and isothermal methods varied in the range of $190-204\;{\pm}\;5\;kJ\;mol^{-1}$. The X-ray powder diffraction analysis of heat treated and transparent samples showed the presence of nano-scale size sodium-tellurite crystals. These crystallites were found to have a strong influence on the full width of half maxima of the transition in $Er^{3+}:\;^4I_{13/2}{\rightarrow}^4I_{15/2}$, which extended from 70 nm in the vitreous materials to 132 nm in glass-ceramic materials.