• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.111-114
• /
• 1992

Ordering phenomena were observed for Zn and Ta cations of $Ba(Zn_{1/3}Ta_{2/3})O_3$ under particular heat treatments, followed by a considerable lattice distortion. This lattice distortion was measured by X-ray powder diffraction with a precision of higher than 1/10,000. From this investigation, a significant lattice distortion occurred within 30 min. of sintering at $1350^{\circ}C$, and it was increased with sintering time.

• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.565-572
• /
• 1993

LPE(liquid phase epiraxy)법으로 성장시킨 $Al_{x}$ Ga$_{1-x}$As (0.15.leq.x.leq.0.67) 에피층의 구조적 특성을 이중결정 X-선 회절장치를 사용하여 조사하였다. GaAs기판과 $Al_{x}$ Ga$_{1-x}$As 에피층의 격자상수 차이로 인해 피이크가 분리되었고 이는 조성비가 증가함에 따라 선형적으로 증가하였다. 그리고 조성비는 Vegard의 법칙으로 구한 값과 기판 및 에피층 피이크 사이 각도분리(.DELTA..theta.)를 측정함으로써 구한 값이 일치하였으며 이때 관계식은 .DELTA..theta.=354.x을 얻었다. 또한 성장된 에피층은 compressive stress를 받고 있으며 조성비(x)가 0.15에서 0.67로 증가함에 따라 응력은 증가하였으며 그리고 피이크의 반치폭으로 부터 계산된 전위밀도가 역시 증가하였다.

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.62-69
• /
• 1999

Lignin in wood cell walls influeced the transformation of the cellulose crystal structure during mercerization. Samples of sound and decayed woods by white rot fungus of Quercus mongolica were treated with 20% aquous NaOH solution, followed by washing and drying, and delignified. The effect of delignification on cellulose structure was investigated by a series of an X-ray diffraction analysis and ultraviolet(UV) microscopy. Delignification of alkali-treated woods did not influence their cellulose crystal structures. It may be concluded that lignin prevents the swelling of wood cellulose during mercerization and restrain the intermingling of cellulose chains.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.368.2-368.2
• /
• 2014

$SnO_2$을 이용한 반도체는 기체 센서, 트랜지스터, 태양전지와 같은 여러 분야에 적용 가능하기 때문에 많은 각광을 받고 있다. $SnO_2$을 이용한 반도체 소자는 높은 화학적 안정성과 독특한 물리 화학적 특성을 지니고 있을 뿐만 아니라 부피에 대한 높은 표면적 비율을 가지고 있다. 우수한 $SnO_2$나노구조를 얻기 위해서 전자관 박막증착, 졸겔법, 물리적 증기증착, 열증착과 같은 다양한 방법들이 사용되었다. 다양한 합성 방법들 중에서 전기화학 증착법은 높은 성장율, 대면적 공정, 낮은 가격과 같은 장점을 가지고 있어 많은 연구가 진행되었지만, $SnO_2$ 구조의 성장조건에 따른 체계적인 연구는 진행되지 않았다. 본 연구는 indium-tin-oxide (ITO)로 코팅된 유리 기판 위에 전기화학 증착법을 사용하여 다양한 성장 조건에 따라 성장된 $SnO_2$나노구조들의 물리적 특성들을 관찰하였다. ITO 유리 기판 위에 성장된 $SnO_2$나노구조는 음극의 전구체와 전류의 상호작용에 의해 생성되는 산소 분자의 환원에 의해 형성된다. $SnO_2$나노구조의 모양은 전기화학 증착의 성장 환경에 따라 달라진다. $SnO_2$나노구조를 관찰하기 위해 시간에 따른 전압-전류, X-ray광전자분광법, 주사형전자현미경, X-ray회절분석법을 사용하여 측정하였다. ITO 유리 기판 위에 성장한 $SnO_2$ 소자에 서로 다른 인가 전압을 가해 주었을 때에 따른 전류밀도를 측정하였다. 일정한 인가전압에서 $SnO_2$나노구조의 X-ray광전자분광법 측정 을 통해 화학적 결합과 X-ray회절분석법 통한 $SnO_2$ 성장 방향을 관찰하였다. 주사형전자현미경 측정을 통하여 $SnO_2$의 표면을 관찰하였다

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.149-156
• /
• 1993

Polycrystalline silicon was produced from metallurgical-grade Si by unidirectional solidification. Variations of impurity concentration and resistivity in the ingots have been investigated. X-ray diffraction analysis has also been performed to examine the crystal orientation. According to the X-ray diffraction analysis on the polycrystalline silicon, preferential orientation was changed from ( 220) into ( III ) with decreasing growth rate. Also, with increasing growth rate and fraction solidified, the resistivity tends to decrease.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.27-34
• /
• 2013

X-ray powder diffraction is one of the most powerful techniques for qualitative and quantitative analysis of crystalline compounds. Thus, there exist a number of different methods for quantifying mineral mixtures using X-ray diffraction pattern. We present here the use of Rietveld and PONKCS (partial or no known crystal structure) methods for quantification of amorphous and crystallized mineral phases in synthetic mixtures of standard minerals (amorphous silica, quartz, mullite and corundum). Pawley phase model of amorphous silica was successfully built from the pattern of 100 wt% amorphous silica and internal standard-spiked samples by PONKCS approach. The average of absolute bias for quantities of amorphous silica was 1.85 wt%. The larger bias observed for lower quantities of amorphous silica is probably explained by low intensities of diffraction pattern. Averages of absolute bias for minerals were 0.53 wt% for quartz, 0.87 wt% for mullite and 0.57 wt% for corundum, respectively. The PONKCS approach achieved improved quantitative results compared with classical Rietveld method by using an internal standard.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1645-1652
• /
• 2002

The failure analysis on fractured parts is divided into the qualitative method by naked eyes and metallurgical microscope etc. and the quantitative method by SEM and X-ray diffraction etc. X-ray fractography can be applied to contaminated surface as well as clean surface and gain the plastic deformation and the residual stress near the fractured surface. Turbine blade is subject to cyclic bending force by steam pressure and suffers fatigue damage according to the increasing operating time. Therefore, to clean up the fracture mechanism of torsion-mounted blade in nuclear plant, the fatigue and the X-ray diffraction test was performed on the 12%Cr steel fur turbine blade and the fractured parts. The correlation of X-ray parameter and fracture mechanics parameter was determined, and then the load applied to actual broken turbine blade was predicted. Failure analysis was performed by contact stress analysis and Goodman diagram of torsion-mounted blade.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.661-665
• /
• 2001

The mechanical alloying (MA) effect in $\sigma$-VFe intermetallic compound was studied by neutron and X-ray diffraction. The structure of MA $\sigma$-VFe powders were characterized by the X- ray diffraction with Cu- $K\alpha$ radiation and neutron diffraction with monochromatic neutrons of $1.835\AA$ using a high resolution powder diffractometer (HRPD). Mechanical alloying of $\sigma$-VFe compound gives rise to a dramatic structural change. After 60 hours of MA, the Fe-Fe distribution of the $\sigma$- phase VFe tetragonal structure with 30 atoms in a unit cell is found to change into that of the $\sigma$-(V,Fe) solid solution with bcc structure, which is a stable phase at elevated temperature above $1200^{\circ}C$. A comparison of X-ray diffraction data for the $\alpha$-phase has been also made with the corresponding neutron diffraction data. The (101) and (111) diffraction peaks of the $\sigma$-phase was clearly observed only in neutron diffraction pattern, which is believed to be a characteristic feature due to the chemical atomic ordering of $\sigma$- VFe phase.

• Journal of the Korean Chemical Society
• /
• v.40 no.9
• /
• pp.607-614
• /
• 1996

The structural changes and dielectric properties of Pb1-x(Na1/2La1/2)x(Mg1/3Nb2/3)O3 compounds substituted by 0∼50 mol.% of Na+/La3+ mixed ions were investigated by X-ray diffraction method, IR and Raman spectroscopy, and LCR meter. The amount of perovskite phase increased with the increases of Na+/La3+ substituents and sintering temperatures. Although the superlattice lines due to 1:1 ordering were not detected by X-ray diffraction method, it was found, from the Raman spectroscopy and the increase of diffuseness coefficient, that the ordering behavior was related to the decrease of A site ion size. Dielectric properties in Pb1-x(Na1/2La1/2)x(Mg1/3Nb2/3)O3 were affected by the amount of perovskite phase, grain size, and density. The phase transitions were broadened and phase transition temperatures were lowered by the increase of Na+/La3+ ions.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.154.2-154
• /
• 2002