• Journal of Radiation Protection and Research
• /
• 제47권1호
• /
• pp.39-49
• /
• 2022

Background: For proper monitoring of the eye lens dose, an appropriate calibration factor of a dosimeter and information about the mean energies of X-rays are indispensable. The scattered X-ray energy spectra should be well characterized in medical practices where eye lenses of medical staffs might be high. Materials and Methods: Scattered X-ray energy spectra were experimentally derived for three different types of X-ray diagnostic and therapeutic equipment, i.e., the computed tomography (CT) scan, the angiography and the fluoroscopy. A commercially available CdZnTe (CZT) spectrometer with a lead collimator was employed for the measurement of scattered X-rays, which was performed in the usual manner. Results and Discussion: From the obtained energy spectra, the mean energies of the scattered X-rays lied between 40 and 60 keV. This also agreed with that obtained by the conventional half value layer method. Conclusion: The scattered X-rays to which medical workers may be exposed in the region around the eyes were characterized by means of spectrometry. The obtained mean energies of the scattered X-rays were found to match the flat region of the dosimeter response.

• 한국컴퓨터정보학회논문지
• /
• 제17권2호
• /
• pp.49-57
• /
• 2012

FCM(fuzzy c-means)은 일반적으로 영상 분할에서 좋은 성능을 보인다. 하지만 공간 정보를 사용하지 않는 일반적인 FCM 알고리즘은 낮은 대비의 영상, 경계선이 뚜렷하지 않은 영상, 잡음이 포함된 영상의 분할에는 좋지 않은 성능을 보인다. 이와 같은 문제를 해결하기 위해 본 논문에서는 3x3 크기의 윈도우를 이용하여 윈도우 내의 중심 픽셀과 주변 픽셀간의 거리 정보를 소속 함수에 추가한 개선된 공간적 퍼지 클러스터링 알고리즘을 제안한다. 본 논문에서는 분할 계수, 분할 엔트로피, Xie-Bdni 함수와 같은 클러스터링 검증 함수를 이용하여 FCM 기반의 다양한 클러스터링 알고리즘과 제안한 알고리즘과의 성능을 비교하였다. 성능 평가 결과 제안한 알고리즘이 기존의 FCM기반의 클러스터링 알고리즘보다 클러스터링 검증 함수에서 성능이 우수함을 확인 할 수 있었다.

• 대한수학회지
• /
• 제37권6호
• /
• pp.915-927
• /
• 2000

This paper is concerned with degenerate Volterra equations Mu(t) + ∫(sub)0(sup)t k(t-s) Lu(s)ds = f(t) in Banach spaces both in the hyperbolic case, and the parabolic one. The key assumption is played by the representation of the underlying space X as a direct sum X = N(T) + R(T), where T is the bounded linear operator T = ML(sup)-1. Hyperbolicity means that the part T of T in R(T) is an abstract potential operator, i.e., -T(sup)-1 generates a C(sub)0-semigroup, and parabolicity means that -T(sup)-1 generates an analytic semigroup. A maximal regularity result is obtained for parabolic equations. We will also investigate the cases where the kernel k($.$) is degenerated or singular at t=0 using the results of Pruss[8] on analytic resolvents. Finally, we consider the case where $\lambda$ is a pole for ($\lambda$L + M)(sup)-1.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1596-1600
• /
• 2010

Surface functionalization of multi-walled carbon nanotubes (MWNTs) was carried out by means of acid treatment. The presence of oxygen functional groups on the surface of acid-treated MWNTs was confirmed with the aid of Fourier transform infrared spectroscopy and X-ray spectroscopy. In addition, carboxylic groups generally formed on the surface of acid-treated MWNTs, and the dispersion was increased by the duration of the acid treatment. The zeta-potential indicated the surface charge transfer and the dispersion of MWMTs. Morphological characteristics of acid-treated MWNTs were also observed using a transmission electron microscopy, X-ray diffraction, and Raman analysis, which was revealed the significantly unchanged morphologies of MWNTs by acid treatment. The hydrogen adsorption capacity of the MWNTs was evaluated by means of adsorption isotherms at 77 K/1 atm. The hydrogen storage capacity was dependent upon the acid treatment conditions and the formation of oxygen functional groups on the MWNT surfaces. The latter have an important effect on the hydrogen storage capacity.

• 한국연초학회지
• /
• 제9권2호
• /
• pp.49-57
• /
• 1987

This study had been conducted to determine morphological characteristics of soil in the major districts cultivating flue-cured tobacco plant. Also native soil productivities were measured by means of bioassay planting tobacco plant without fertilizer at 87 selected soils through field experiment. Morphological characteristics of troll affecting the dry weight of tobacco leaves cultivated in the field were investigated Among soil morphological characteristics, topograpy, slope, topsoil depth, soil depth, and soil texture had influenced with high significant on the dry weight of tobacco leaves. For prediction of dry weight (productivity) of tobacco leaves without fertilizer , multiple regression analysis were introduced using soul morphological characteristics. A combination of topography, slope, topsoil depth, and soil texture was very reliable for prediction of productivity. The regression equation was y = -16.88 -14, 34$X_1$ +20.43$X_2$ +50.21$X_3$ -7.54$X_4$ +13.45$X_5$ R = $0.670^{**}$ Where $X_1$ : Topography $X_2$ : Slope $X_3$ : Topsoil Depth $X_4$ : Soil Depth $X_5$ : Soil Texture

• 대한소아신경학회지
• /
• 제24권3호
• /
• pp.71-83
• /
• 2016

X-linked adrenoleukodystrophy (X-ALD) is caused by mutations in the ATP binding cassette subfamily D member 1 (ABCD1), a gene that encodes peroxisomal membrane located on ABC half-transporter named adrenoleukodystrophy protein (ALDP). X-ALD is characterized by a highly variable clinical spectrum, including progressive cerebral type, adrenomyeloneuropathy, and addison-only phenotype. No genotype/phenotype correlation has been established. Thus, unidentified modifier genes and other co-factors are speculated to modulate the phenotypic variation and disease severity. Recent advanced sequencing methods and reprogramming technologies not only offer an affordable and applicable approach to investigate the pathophysiological mechanisms of adrenoleukodystrophy, but also provide means to develop therapy. A causal therapy of X-ALD is lacking. Lorenzo's oil therapy is recommended for asymptomatic boys, but the longest study found that the oil was not beneficial at all to symptomatic X-ALD patients. Hematopoietic stem cell therapy has a relevant chance of success when performed during this early stage of cerebral type X-ALD. Recently, it has been insisted that lentiviral-mediated gene therapy of hematopoietic stem cells can provide clinical benefits in X-ALD. This review describes current knowledge on the clinical presentation, pathogenesis, diagnosis and management of X- ALD.

• 응용통계연구
• /
• 제13권2호
• /
• pp.343-352
• /
• 2000

K-평균 군집화(K-means clustering)는 비계층적 군집화 방법이 하나로서 큰 자료에서 개체 군집화에 효율적인 것으로 알려져 있다. 그러나 종종 비교적 균일한 대군집의 일부를 소군집에 떼어주는 오류를 범하기도 한다. 이 연구에서는 그러한 현상을 정확히 인지하고 이에 대한 대책으로서 ‘이중 K-평균 군집화(double K-means clustering)’방법을 제시한다. 또한 실증적 사례에 새 방법론을 적용해보고 토의한다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2019년도 제59차 동계학술대회논문집 27권1호
• /
• pp.23-26
• /
• 2019

본 논문에서는 X-Ray 영상에서 용접한 부분의 기공이나 균열 등의 결함 영역을 추출하는 새로운 방법을 제안한다. 제안된 방법은 세라믹 X-Ray 영상에서 비등방성 확산 필터를 적용하여 영상의 잡음을 제거하고, 수직 및 수평 히스토그램을 각각 적용하여 용접 영역을 추출한 후, 최소 자승법을 적용하여 배경 밝기를 제거하고, 사다리꼴 형태의 Fuzzy Stretching기법을 적용하여 명암 값을 강조하여 결함 영역과 그 외의 영역간의 명암 대비를 강조한다. 그리고 Fuzzy C_Means 알고리즘을 적용하여 결함 영역을 세분화한 후, Fuzzy C_Means을 적용하여 생성된 클러스터들의 중심 명암 값을 이용하여 ${\alpha}_-cut$을 설정한 후에 임계구간을 구하고 영상을 이진화하여 최종적으로 결함 영역을 추출한다. 제안된 방법의 결함 추출 성능을 확인하기 위하여 세라믹 X-Ray 영상을 대상으로 실험한 결과, 기존의 방법보다 결함 영역이 정확히 추출되는 것을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.65-71
• /
• 2002

Turbine blade is subject to cyclic bending force by steam pressure. Stress analysis by fractography is already established technology as means far seeking cause of fracture and has been widely employed. In the X-ray frctography, plastic deformation and residual stress near the fracture surface can be determined and information of internal structure of material can be obtained. Therefore, to find a fracture mechanism of torsion-mounted blade in nuclear power plant, based on the information from the fracture surface obtained by fatigue test, the correlation of X-ray parameter and fracture mechanics parameter was determined and then the stress intensity factor to actual broken turbine blade was predicted.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.152-152
• /
• 2003

Hg$\sub$l-x/Cd$\sub$x/Te (MCT) was grown by hot wall epitaxy. Prior to the MCT growth, the CdTe (111) buffer layer was grown on the GaAs substrate at the temperature of 590$^{\circ}C$ for 15 min. When the thickness of the CdTe buffer layer was 5 $\mu\textrm{m}$ or thicker, the full width at half maximum values obtained from the x-ray rocking curves were found to significantly decrease. After a good quality CdTe buffer layer was grown, the MCT epilayers were grown on the CdTe (111) /GaAs substrate at various temperatures in situ. The crystal quality for those epilayers was investigated by means of the x-ray rocking curves and the photocurrent experiment The photoconductor characterization for the epilayers was also measured The energy band gap of MCT was determined from the photocurrent measurement and the x composition rates from the temperature dependence of the energy band gap were turned out