• Title/Summary/Keyword: X-Y stage

Search Result 1,183, Processing Time 0.022 seconds

Mechanism of Intercalation Compounds in Graphite with Hydrogen Sulfate (II. Study of Intermediate Phase between 2 stage and 1 stage in Graphite Hydrogen Sulfate) (흑연에 황산을 Intercalation 시킬 때의 Mechanism 규명 (II. 화학적 방법에 의한 Graphite Salts의 중간상에 관한 연구))

  • 고영신
    • Journal of the Korean Ceramic Society
    • /
    • v.25 no.4
    • /
    • pp.408-414
    • /
    • 1988
  • This thesis is 2nd thesis from "Mechanism of Intercalation Compounds in Graphite with Hydrogen sulfate(J. Korea Cer. Soc. Vol. 22. No.6, 1985). We have oxidized natural Graphite flakes(0.1~0.2mm., Kropfm hl passau in Deutchland. S40) with a solution of CrO3 in H2SO4. Whilst persulfate ions were intercalated, too, below 7$^{\circ}C$, no evidence for intercalation of a peroxo compound was found at 22$^{\circ}C$. The reaction was interrupted after various times by filtering and washing with concentrated H2SO4. X-ray diffraction showed that the 2nd stage compound had already been formed after 2 minutes. We could only follow further oxidation to the blue stage compound which was completed after 35 minutes. We have found six distinct intermediate stage between 2nd stage and 1 stage. Experiments are described on the formation of intermediate stage color and X-ray diffraction analysis.ysis.

  • PDF

Nano Position Control of Plane X-Y Stage Using Minimum Order Observer (최소차원 관측기를 이용한 평면 X-Y 스테이지의 나노 위치제어)

  • 김재열;윤성운;곽이구;안재신;한재호
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2003.10a
    • /
    • pp.180-185
    • /
    • 2003
  • Performance test of servo control system that is used ultra-precision positioning system with single plane X-Y stage is performed by simulation with Matlab. Analyzed for previous control algorithm and adapted for modem control theory, dual servo algorithm is developed by minimum order observer, and stability priority on controller are secured. Through the simulation and experiments on ultra precision positioning, stability and priority on ultra-precision positioning system with single plane X-Y stage and control algorithm are secured by using Matlab with Simulink and ControlDesk made in dSPACE

  • PDF

Studies on peptides during soybean-koji preparation -part I Peptides formation during soybean-koji preparation- (콩고오지 제조중(製造中)의 peptide에 관(關)한 연구(硏究) -제1보(第一報) 콩고오지 제조중(製造中)의 peptide의 소장(消長)-)

  • Kim, Ze-Uook
    • Applied Biological Chemistry
    • /
    • v.6
    • /
    • pp.79-87
    • /
    • 1965
  • The contents of insoluble protein nitrogen, water soluble protein nitrogen anti peptides' nitrogen were determined of the samples which were taken in seven and half hours intervals during soybean-koji preparation to study changes of soybean protein, and the contents of total nitrogen and amino nitrogen were measured for the fractions resulting from molecular sieving by using Dowex 50 having various cross linkages for the peptides from soybean-koji extracts. As the results of the studies, The followings were obtained: 1. The contents of insoluble protein nitrogen and peptides' nitrogen are fairy constant at the earlier stage, where the former decreased and the latter increased markedly as mycelia grow, then rate of the decreases and the increases of them become lower at later stage after sporulation. The contents of water soluble protein are also constant at the earlier stage until covering of mycelia over the koji and increased since then until the stage of sporulation and then decreased at the later stage. 2. The amount of peptides nitrogen in each fraction obtained by the molecular sieving was almost constant at the earlier stage and the values in fractions of X-16, X-12, X-8. X-4 and X-2 increased considerably together as mycelia grow. Then the values in the fractions showed almost plateaux, after sporulalion, where the effluent fraction showed markedly increased values throughout mycelia growth.

  • PDF

Design of Two-Stage X-Band Power Amplifier Using GaN-HEMT (GaN-HEMT를 이용한 X-대역 이단 전력증폭기 설계)

  • Lee, Wooseok;Lee, Hwiseob;Park, Seungkuk;Lim, Wonseob;Han, Jaekyoung;Park, Kwanggun;Yang, Youngoo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.27 no.1
    • /
    • pp.20-26
    • /
    • 2016
  • This paper presents an X-band two-stage power amplifier using GaN-HEMT. Two-stage structure was adopted to take its high gain and simple inter-stage matching network. Based on a 3D EM simulation, the bond-wire inductance and the parasitic capacitance were predicted. By reducing bond-wire inductance, Q of the matching network is decreased and the bandwidth is improved. The implemented two-stage PA shows a power gain of more than 16 dB, saturated output power of more than 42.5 dBm, and a efficiency of more than 35 % in frequency range of 8.1~8.5 GHz with an operating voltage of 40 V.

Epidemiology and Control of Strawberry Bacterial Angular Leaf Spot Disease Caused by Xanthomonas fragariae

  • Kim, Da-Ran;Gang, Gun-hye;Jeon, Chang-Wook;Kang, Nam Jun;Lee, Sang-woo;Kwak, Youn-Sig
    • The Plant Pathology Journal
    • /
    • v.32 no.4
    • /
    • pp.290-299
    • /
    • 2016
  • Strawberry bacterial angular leaf spot (ALS) disease, caused by Xanthomonas fragariae has become increasingly problematic in the strawberry agro-industry. ALS causes small angular water-soaked lesions to develop on the abaxial leaf surface. Studies reported optimum temperature conditions for X. fragariae are $20^{\circ}C$ and the pathogen suffers mortality above $32^{\circ}C$. However, at the nursery stage, disease symptoms have been observed under high temperature conditions. In the present study, results showed X. fragariae transmission was via infected maternal plants, precipitation, and sprinkler irrigation systems. Systemic infections were detected using X. fragariae specific primers 245A/B and 295A/B, where 300-bp and 615-bp were respectively amplified. During the nursery stage (from May to August), the pathogen was PCR detected only in maternal plants, but not in soil or irrigation water through the nursery stage. During the cultivation period, from September to March, the pathogen was detected in maternal plants, progeny, and soil, but not in water. Additionally, un-infected plants, when planted with infected plants were positive for X. fragariae via PCR at the late cultivation stage. Chemical control for X. fragariae with oxolinic acid showed 87% control effects against the disease during the nursery period, in contrast to validamycin-A, which exhibited increased efficacy against the disease during the cultivation stage (control effect 95%). To our knowledge, this is the first epidemiological study of X. fragariae in Korean strawberry fields.

Seminiferous Epithelium Cycle and Developmental Stages of Spermatids in the Apodemus agrarius coreae

  • Lee, Jung-Hun
    • Biomedical Science Letters
    • /
    • v.13 no.1
    • /
    • pp.61-69
    • /
    • 2007
  • The cycle of the seminiferous epithelium and the development of spermatids of Apodemus agrarius coreae were observed using a light microscope. The cycle of the seminiferous epithelium was divided into 10 stages, and developing spermatids were subdivided into 10 steps. The Golgi phases occurs the first two steps ($St_1,\;St_2$), and the cap phases had the next two consecutive steps ($St_3$ and $St_4$). The acrosomal phases consisted of steps $5{\sim}8$ ($St_5-St_8$), and the remaining two steps consisted the maturation ($St_9$) and spermiation ($St_{10}$) phases, respectively. Type Ad spetmatogonia are appeared in all stages (I-X). Type Ap spermatogonia appeared from stage I and II, In spermatogonia from stage III, IV and V, and B spermatogonia from stages VI. The leptotene spermatocytes appeared from stage VII, zygotene from stages I, II, VIII, IX and X, pachytene from stage III to VIII, diplotene in stage IX, and meiotic figures and secondary spermatocytes in stage X. These data are considered in relation to interspecific differences in sperm morphology.

  • PDF

Analysis of structural and thermodynamic properties for Li-SGICs synthesized by chemical method (화학적 방법에 의하여 합성된 Li-SGICs의 구조적, 열역학적 특성 분석)

  • 오원춘
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.8 no.3
    • /
    • pp.435-441
    • /
    • 1998
  • Li-SGICs as a anode of lithium ion battery were synthesized by high-pressure method as a function of the Li-contents. The characteristics of these prepared compounds were determined from the studies with X-ray diffraction method and differential scanning calorimeter (DSC) analysis. From the results of X-ray diffraction, it was found that the lower stage intercalation compounds were formed with increase of Li-contents. The mixed stages in these compounds were also observed. In the case of the $Li_{30;wt%}$-SGIC, the compounds in the stage 1 structure were formed predominantly, but the structure of only pure stage 1, due to the structural defect of synthetic graphite, was not observed. The enthalpy and entropy changes of the compounds could be obtained from the differential scanning calorimetric analysis results. From the results, it was found that exothermic and endothermic reactions of Li-SGICs are related to thermal stability of lithium between artificial graphite layers.

  • PDF

Bleaching of Kraft Pulp with Xylanase and Laccase-Mediator System

  • Yoon, Chulhyun;Jung, Hyunchae
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.46 no.1
    • /
    • pp.1-10
    • /
    • 2014
  • Xylanase (X) derived from Aurreobasidium pullulans and laccase-mediator system (LM) using Trichophyton sp. LKY-7 laccase (TrL) and N-hydroxy-2-pyridone analogue (NHP) as a mediator were applied in hardwood kraft pulp (HwKP) bleaching. The individual and the synergistic effects of X and LM stage were investigated in the enzymatic bleaching of HwKP. Also, the effects of subsequent alkaline extraction (E) and alkaline/hydrogen peroxide treatment (P) were examined. In X or LM treatment alone, an appreciable bleaching effect of HwKP was not observed, whereas subsequent E or P stage enhanced the increase of brightness and the decrease of kappa number. Especially, P stage significantly enhanced the bleaching effect of pulp. Bleaching of HwKP with XLM sequentially gave significantly higher pulp brightness and lower kappa number than that obtained after the treatment of HwKP with X+LM simultaneously. When HwKP was sequentially treated with XLM followed by P stage, the brightness increased by about 11% ISO and the kappa number decreased by about 3.6 in comparison with the initial pulp. Xylanase and laccase were strongly inactivated by NHP both in the absence and the presence of pulp.

Quantitative Physiology of T. reesei

  • Ryu, Deway;Ryu, W.S.
    • Proceedings of the Korean Society for Applied Microbiology Conference
    • /
    • 1979.04a
    • /
    • pp.115.2-115
    • /
    • 1979
  • By employing a two-stage continuous culture system, some of important physiological parameters involved in cellulase bicsynthesis have been evalua-ted with an ultimate objective of detigning an op-timally controlled tellulase process. Volumetric and specific cellulase productivities obtained were 90 IU/liter/hr and 8IU/g biomass/hr respectively. The maximum specific enzyme productivity observed was 14.8 IU/g hiomass/hr. The optimal dilution rate in the second stage which corresponded to the maximum enzyme productivity was 0.026-0.028 hr$^{-1}$ , and the specific growth rate in the second stage ihat suported maximum specific enzyme productivity was equal to orslightly less than zero. The maintenance coefficients deter-mined for oxygen and for carbon source are M$_{o}$=0.85mmmole/g biomass/hr and M$_{c}$=0.14 mmole hexose/g bio mass/hr respectively. The yield constants determined are; Y(x/o) =32.3g biomass/mole oxygen, Y (x/c) =1.1g bio-mass/g carbon or 0.44g biomass/g hexose, Y(x/n) = 19.6g biomass/g nitrogen for the enzyme produc-tion stage and 12.5g biomass/g nitrogen for the cell growth stage.e.e.

  • PDF

Optimal Design of Controller for Ultra-Precision Plane X-Y Stage (초정밀 평면 X-Y 스테이지의 최적제어기 설계)

  • Kwak, L. K.;kim, J. Y.;Yang, D. J.;Ko, M. S.;You, S.;Kim, K. T.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2002.05a
    • /
    • pp.342-347
    • /
    • 2002
  • After the industrial revolution in 20 century, the world are preparing for new revolution that is society with knowledge for a basis such as IT(Information Technology), NT(Nano Technology) and BT(Bio Technology). Recently, NT is applied to various fields that are composed of science, industry, media and semiconductor-micro technology. It has need of IT that is ultra-precision positioning technology with strokes of many hundreds mm and maintenance of nm precision in fields of ultra micro process, ultra precision measurement, photo communication part and photo magnetic memory. Performance test of servo control system that is used ultra-precision positioning system with single plane X-Y stage is performed by simulation with Matlab. Analyzed for previous control algorithm and adapted for modern control theory, dual servo algorithm is developed by minimum order observer, and stability and priority on controller are secured. Through the simulation and experiments on ultra precision positioning, stability and priority on ultra-precision positioning system with single plane X-Y stage and control algorithm are secured by using Matlab with Simulink and ControlDesk made in dSPACE

  • PDF