• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.131-143
• /
• 1984

150 rats weighting about 150gm were devided into control group of 80 and experimental group of 70. Control group was subdivided into the irradiated vitamin D injection group and X-ray irradiated group. Experimental group was given 2.0mg ergocalciferol by four intramuscular injection prior to X-ray irradiation with single 800 rads and 1,500 rads respectively. Experimental animals from each group was sacrificed after 1, 3, 7, 14, and 28 days and their incisors were investigated by histopathological examination. The results were as follows; 1. In the irradiated groups, it showed dentin hypoplasia and formation of dentinoid substance caused by degeneration of odontoblast at the early stage. Especially, 1,500 rads group which was severely effected showed formation of osteoid dentin at the apical portion and severe injuries of dental papilla at the first week. 2. In the vitamin D2 administration group, it showed thinned dentin layer at the early stage but, taking time, predentin and dentin layer was thickened. At the fourth week, dentin was chiefly composed of interglobular dentin, especially in the lingual portion. 3. Using in combination of overdose vitamin D2 administration and X-ray irradiation, it effected severely odontoblast, undifferentiated mesenchymal cells around tooth germ and pulp tissue. At the early stage, dentin layer was thinned but, taking time, it was thickened and composed of interglobular dentin caused by calcification of predentin layer. 4. In 800 rads irradiation after the overdose vitamin D2 administration, it showed formation of osteoid dentin in the lingual portion at the first week. In the 1,500 rads irradiation after the overdose vitamin D2 administration, it showed formation of osteoid dentin and degeneration of ameloblast in both buccal and lingual portion at the first week, and enamel hypoplasia caused by edema and loss of polarity of ameloblasts at the second week. 5. By the entire experiment, the overdose vitamin D2 administration and X-ray irradiation effected severely odontoblasts, undifferentiated mesenchymal cells of dental papilla, and primitive cells of tooth germ among the dental tissue. Especially using combination of overdose vitamin D2 administration and X-ray irradiation also effected ameloblasts, resulting in enamel hypoplasia.

• Korean Journal of Child Studies
• /
• v.6 no.1
• /
• pp.17-40
• /
• 1985

This study investigated Korean children's early acquisition of negatives and focused on four research questions: 1) processing of negative variations; 2) the nature of negatives when negatives are completely acquired in Korean (in which meaning and form are matched in one to one mapping); 3) the validity of Bellugi's negative acquisition model in Korean; and 4) the cause of child's erroneous sentence production: limited ability or regularity in children's cognition. The language data of the five subjects (age span; 1.1 - 3.11) were collected by their parents in the natural setting of the home. The results showed that 1) the pivot form, was processed in many ways from a simple to a complicated form, such as <(X+X')+N> <(x+x')+N,Y> <(x+x') N,(y+y')>. It appeared that the children used a simple negative format to reach a one-step advanced negative format. 2) Korean negatives are divided into range of negation in the negative sentence (part or whole), strength of negation (absolute or general), functions of meaning (negation, absences, refusal, prohibition, impossibility). All five children acquired negative sentences in all functions and the complete range after 3 years of age. 3) In spite of the differences in age level, Bellugi's four stage model was in evidence; that is, Korean children's negative acquisition was almost identical with Bellugi's tour stage model in deep structure. 4) Analyses of children's error sentences showed that the sentences with errors were made not because of the children's limitation in cognitive ability but because of the strict application of regularity of rules from the original grammars. Consequently, the children produced negative sentences using two rules: the rule of additive complexity (from simple to complex) and the rule of division (from one to several).

• Research in Plant Disease
• /
• v.9 no.2
• /
• pp.68-71
• /
• 2003

Correlation between rice yield loss and infection time of neck blast after panicle emergence was analyzed in paddy fields at Icheon in 1999 and 2000. As the neck blast occurred at early heading stage, the yield loss of a early maturity variety, Jinmibyeo, ranged from 83.9% to 81.6%, while it ranged from 44.3% to 33.1% when the disease developed 30 days after heading. The regression equations of yield loss(y) caused by the neck blast infection time(x) in Jinmibyeo were y =1.2717x + 79.523(R2 = 0.9487) and y = 1.6872x + 74.545(R2 = 0.7993) in 1999 and 2000. In a mid-lately maturity variety, Chucheongbyeo, yield loss ranged from 64.9% to 47.8% when the disease developed at early heading stage. While it ranged from 29.1% to 8.9% when the disease occurred 40 days after heading. The regression equations of yield loss caused by the disease in Chucheongbyeo were y= 1.2717x + 79.523($R^2$ = 0.9487) and y = 1.6872x + 74.545(($R^2$ = 0.7993) in 1999 and 2000. Weights of 1,000 rice grains of Jinmibyeo and Chucheongbyeo were also drastically decreased to 38.3% and 57.3%, respectively, compared to healthy control when the disease occurred at early heading stage. However, weights of the two cultivars were 87.6% and 92.9% compared to control when the disease developed after 40 days of heading. Results indicated that there is a highly negative correlation between rice yield loss and infection time of the neck blast.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.1
• /
• pp.15-21
• /
• 1999

The aim of the present study was to determine the effect of paternal sex chromosome on early development of buffalo embryos fertilized and cultured in vitro. Embryos were produced in vitro from abattoir derived buffalo oocytes. The cleaved embryos were cocultured with buffalo oviductal epithelial cells and evaluated on day 7 under the phase contrast microscope to classify development. The embryos which reached the morula/blastocyst stage were fast developing, the embryos which were at 16-32 cell stage were medium developing and the embryos below 16 cell stage were slow developing. The embryos which showed some fragmentation in the blastomeres or degenerated blastomeres, were degenerating. Sex of emberyos (n=159) was determined using PCR for amplification of a male specific BRY. 1 (301 bp) and a buffalo specific satellite DNA (216 bp) fragments. The results thus obtained show that 1) X and Y chromosome bearing sperms fertilize oocytes to give almost equal numbers of cleaved XX and XY embryos, 2) male embryos develop faster than female embryos to reach advanced stage and 3) degeneration of buffalo embryos is not linked with the paternal sex chromosome. We suggest that faster development of males is due to differential processing of X and Y chromosome within the zygote for its activation and / or differential expression of genes on paternal sex chromosome sex chromosome during development of buffalo embryos fertilized and cultured in vitro which may be attributed to a combination of genetic and environmental factors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1079-1086
• /
• 2012

In this paper, X-band 60 W Solid-State Power Amplifier with sequential control circuit and pulse width variation circuit for improve bias of SSPA module was designed. The sequential control circuit operate in regular sequence drain bias switching of GaAs FET. The distortion and efficiency of output signals due to SSPA nonlinear degradation is increased by making operate in regular sequence the drain bias wider than that of RF input signals pulse width if only input signal using pulsed width variation. The GaAs FETs are used for the 60 W SSPA module which is consists of 3-stage modules, pre-amplifier stage, driver-amplifier stage and main-power amplifier stage. The main power amplifier stage is implemented with the power combiner, as a balanced amplifier structure, to obtain the power greater than 60 W. The designed SSPA modules has 50 dB gain, pulse period 1 msec, pulse width 100 us, 10 % duty cycle and 60 watts output power in the frequency range of 9.2~9.6 GHz and it can be applied to solid-state pulse compression radar using pulse SSPA.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.51-58
• /
• 2008

This paper presents a new design of the precision stage for the reticle in lithography process and a low hunting control method for the stage. The stage has three axes for X, Y, ${\theta}_z$ those actuated by three voice coil motors individually. The designed reticle stage system has three gap sensors and voice coil motors, and supported by four air bearings and the forward/inverse kinematics of the stage were solved to get an accurate reference position. When a stage is in regulating control mode, there always exist small fluctuations(stage hunting) in the stage movement. Because the low stage hunting characteristic is very important in recent lithography and nano-level applications, a special regulating controller for ultra low hunting is proposed in this paper. Also this research proposed the 2-step transmission system for preventing the noise infection from environmental devices. The experimental results showed the proposed regulating control system reduced hunting noise as 35nm(rms) when a conventional PID generates 77nm(rms) in the same mechanical system. Besides the reticle stage has 100nm linear accuracy and $1{\mu}rad$ rotation accuracy at the control frequency of 8kHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.246-252
• /
• 2017

Pulverized $FeS_2$ (pyrite) gives different discharge test results with as-received $FeS_2$ electrodes. The as-received $FeS_2$ electrode shows three voltage plateaus during the discharge test. However, the ball-milled $FeS_2$ electrode shows two voltage plateaus. To interpret this result, the effect of $FeS_2$ particle size on electrochemical reactions is investigated by unit cell discharge tests, SEM and XRD. As a result, it is found that the transition reaction product ($Li_2+xFe+xS_2$) of $FeS_2$ explains the difference. The as-received $FeS_2$ reacts according to three reaction steps ($FeS_2{\rightarrow}Li_3Fe_2S_4{\rightarrow}Li_2+xFe_1+xS_2{\rightarrow}LiFe_2S_4$). However, ball-milled $FeS_2$ reacts without the $Li_2+xFe_1+xS_2$ stage. In this study, this result is explained by the difference in electrochemical reaction mechanism. The as-received $FeS_2$ has a larger radius than the ball-milled $FeS_2$. Therefore, the lithium ion has to diffuse into the $FeS_2$ unreacted core, and $Li_2+xFe_1+xS_2$, the transition reaction product of as-received $FeS_2$, is formed during this stage.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.24-27
• /
• 2011

Effect of substitution of Mn for Ni on transformation behavior, shape memory characteristics and superelasticity of Ti45Ni-5Cu alloy has been investigated by means of electrical resistivity measurements, X-ray diffraction, thermal cycling tests under constant load and tensile tests. The one-stage B2-B19' transformation occurred when Mn content was 0.5 at%, above which the two-stage B2-B19-B19' transformation occurred. A temperature range where the B19 martensite exists was expanded with increasing Mn content because decreasing rate of Ms (60 K / % Mn) was larger than that of Ms' (40 K / % Mn). Ti-(45-x)Ni-5Cu-xMn alloys were deformed in plastic manner with a fracture strain of 60 % ~ 32 % depending on Mn content. Clear superelasticity was found in fully annealed Ti-(45-x)Ni-5Cu-xMn alloys with Mn content more than 1.0 at%, which was ascribe to a solid solution hardening by substitution of Mn for Ni.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.97-103
• /
• 2002

In this paper, a Logarithmic Video Amplifier(LVA) for radar system or satellite communications is described. The proposed LVA is composed of a input stage, amplification stage, and output stage. As well as a novel series-parallel architecture is proposed for the purpose of wide dynamic range and high speed operation, a newly developed input stage is designed in order to control the voltage level between LVA and detector diode. The LVA is fabricated with a 1.5um 2-poly 2-metal n-well Bi-CMOS technology, and the chip area is 1310 um x 1540 um. From the experimental results, it consumes 190 mW at 10V power supply, the chip has 60 dB dynamic range and 100ns falling time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.147-147
• /
• 2000

Chemisorption of oxygen molecules on the Si(111)-(7x7) surface has been studied extensively as a model for the initial-stage oxidation of the surface. The basic step to the surface oxidation is the dissociation of the adsorbed O2 molecules, but the dissociation procedure and the atomic structure of the reaction products still remains as a subject of debates. We present here density-functional theory calculations on the initial-stage oxidation states of the Si adatom site for all possible dissociation configurations that can be generated by multiple O2 reactions. We determine the equilibrium structures and analyze their electronic and vibrational properties in comparison with measured UPS, XPS, and EELS spectra. The O(ad) atom bonded on top of the Si adatom is always less stable than the O(ins) atom inserted into one of the adatom backbonds. Our electronic and vibrational analysis demonstrates further that the O(ad) and O(ins) atoms account well for the metastable and stable features in previous experiments, respectively. Moreover, the calculated decay pathways of the metastable structures and the comparison of the calculated O ls core-level shifts with XPS data provides a convincing argument in unambiguously identifying the experimental metastable and stable structures, thereby making it possible to build a correct atomic-scale picture of the initial-stage oxidation process on this surface.