• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.91-100
• /
• 2004

This paper presents a receiver-driven TCP flow control mechanism, which is adaptive to the wireless condition, for memory constrained mobile receiver. A receiver-driven TCP flow control is, in general, achieved by adjusting the size of advertised window at the receiver. The proposed method constantly measures at the receiver both the available wireless bandwidth and the packet round-trip time. Depending on the measured values, the receiver adjusts appropriately the size of advertised window. Constrained by the adjusted window which reflects the current state of the wireless network, the sender achieves an improved TCP throughput as well as the reduced round-trip packet delay. Its implementation only affects the protocol stack at the receiver and hence neither the sender nor the router are required to be modified. The mechanism has been implemented in real environments. The experimental results show that in CDMA2000 1x networks the TCP throughput of the proposed method has improved about 5 times over the conventional method when the receiver's buffer size is limited to 2896 bytes. Also, with 64Kbytes of buffer site, the packet round-trip time of the proposed method has been reduced in half, compared the case with the conventional method.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.229-233
• /
• 2012

A small water phantom (dual-window phantom) was developed to improve the output measurement efficiency of medical linacs. This phantom is suitable for determining the quality index and output dose for high-energy photon beams. The phantom has two opposite windows and two independently rotating axes. The two axes measure the tissue phantom ratio (TPR) and the percentage depth dose (PDD) simply without requiring chamber movement by rotating the phantom around its axis. High-energy photon beams from a Co-60 irradiator and a medical linac were used to evaluate the phantom. The measured quality index is in good agreement with the reference values; the measured and reference values are within 0.2% of each other for the Co-60 gamma rays and within 1.4% for 6 and 10 MV X-rays. This phantom is more practical for routine output measurements, resulting in the prevention of potential human errors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.705-708
• /
• 2003

To observe a hydrated biological specimen, an environmental chamber was necessary to keep the specimen in a wet state under vacuum surroundings. The specimen holder is as follows designed consequently. The specimen holder consisted of two Si wafers, the centers of which were Si$_3$N$_4$(100nm thickness) windows of a 0.3mm square. The windows were made by a photo-lithographic method. The transmission of a window at 400eV is about 70%. A hydrated biological specimen was put between the two windows. When the chamber was closed, two wafers were contact at the metal mesh by the pressure of O-rings, and the specimen holder moved by the three micrometers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.32-35
• /
• 1979

When photon was injected to SnO2- amorphous Sb S thin film -Sn structure through the window of SnO2, photo- voltaic effect was observed. With the energy change of photon, photovoltage had either positive or negative value This phenomenon was considered to be caused by formation of n-n heterojunction in SnO2 - Sb S structure and Schottky junction Sb S -Sn structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.777-790
• /
• 2001

Theoretical analyses have been tried to design high power and stable operating SLD at 1.55${\mu}{\textrm}{m}$ wavelength range which is the lowest absorption wavelength in optical fiber. The materials of active layer and SCH layer were chosen as conventional In1-xGaxAsyPl-y quaternary composition systems. From the transverse mode and the lateral mode analyses of waveguide, the optical power distributions and the optical confinement factor have been studied for single-mode high power operation. According to these analyses, it was calculated the composition and the thickness of SCH layer to obtain the maximum optical confinement factor. In order to obtain low values of the reflectivity, we used the window region and the lateral tilted angle between tile active region and window region. And the reflectivity of SLD was calculated with the gaussian beam approximation and mode analysis. From these researches, it was confirmed for several results to fabricate the efficient and stable SLD. In case of using $1.3\mum$, InGaAsP SCH layer, the layer thickness was obtained $0.08\mum$, to get the maximum optical confinement factor. Using $0.2\mum$, active layer thickness and $0.08\mum$, SCH layer thickness, the window region length is about $100\mum$ without An coating, $10\mum$ in 1% AR coating to obtain about 10-4 reflectivity. When the tilted angle is about $10~15^{\circ}$, the reflectivity is about 10-3. From these results, if the window region length and tilted angle were controlled appropriately in given device structure, it was confirmed that it is possible to fabricate the stable SLD without AR coating analytically.

• Korean Journal of Metals and Materials
• /
• v.48 no.1
• /
• pp.85-89
• /
• 2010

The plastic deformation behavior of magnesium alloy is affected simultaneously by deformation temperature and strain rate under warm and/or hot working conditions. The soundness of deformation of AZ31-xCa (x=0. 0.7, 2.0 wt.%) extrudes during compression was strongly affected by processing variables including deformation temperature, strain rate. compression-loading direction, which was related to the activation of available deformation systems. The deformation behavior of AZ31-xCa extrudes was also affected by Ca content, which was related to the change of the sort and fraction of second phase. The complex effects of deformation temperature and strain rate on the deformation behavior of AZ31-xCa extrudes during compression under various conditions could be successfully described by Zener-Hollomon parameter.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.588-595
• /
• 2020

Prediction and control of nitrogen oxides (NO_x) emission is of great interest in industry due to stricter environmental regulations. Herein, we propose an artificial intelligence (AI)-based framework for prediction of NO_x emission. The framework includes pre-processing of data for training of neural networks and evaluation of the AI-based models. In this work, Long-Short-Term Memory (LSTM), one of the recurrent neural networks, was adopted to reflect the time series characteristics of NO_x emissions. A decision tree was used to determine a time window of LSTM prior to training of the network. The neural network was trained with operational data from a heating furnace. The optimal model was obtained by optimizing hyper-parameters. The LSTM model provided a reliable prediction of NO_x emission for both training and test data, showing an accuracy of 93% or more. The application of the proposed AI-based framework will provide new opportunities for predicting the emission of various air pollutants with time series characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.291-296
• /
• 2007

This study presents the evaluation process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of 6x6 array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.186-189
• /
• 2002

The MFIS capacitors were fabricated using a metalorganic decomposition method. Thin layers of $CeO_2$ were deposited as a buffer layer on Si substrate and BLT thin films were used as a ferroelectric layer. The electrical and structural properties of the MFIS structure were investigated. X-ray diffraction was used to determine the phase of the BLT thin films and the quality of the $CeO_2$ layer. The morphology of films and the interface structures of the BLT and the $CeO_2$ layers were investigated by scanning electron microscopy. The width of the memory window in the C-V curves for the MFIS structure is 4.78 V. The experimental results show that the BLT-based MFIS structure is suitable for non-volatile memory FETs with large memory window.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.617-632
• /
• 2002

The purposes of this study are 1) to classify the consumer group according to clothing purchase store(department store, road shop, discount store, Dongdaemoon & Namdaemoon markets) 2) to analyze the differences between VMD attributes which each consumer group value. The attributes on the VMD are categorized as 5 areas 1) interior 2) show window 3) product display & display change cycle 4) color · light · music · small instrument 5) promotion(POP & salesperson). The data were collected from 238 females students and were analyzed by frequency, percent and X²-test. The results of this study are as fellows . 1) On the attribute of Interior, there were significant differences in terms of flow in a store, rest area, the cleanness of floor, show case, and the merchandise itself. 2) On the attribute of show window, there were significant differences in terms of interst of show window. 3) On the attribute of product display & display change cycle, there were significant differences in terms of display method, and display change cycle. 4) On the attribute of color · light · music · small instrument, there were significant differences in terms of interest of color coordination, luminosity and effect of light, and necessity of music & small instrument. 5) On the attribute of promotion(POP & salesperson), there were significant differences in terms of aid of POP.