• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.371-377
• /
• 2017

General phantom for practical X-ray photography Practical phantom is an indispensable textbook for radiology, but it is difficult for existing commercially available phantom to be equipped with various kinds of phantom because it is an expensive import. Using 3D printing technology, I would like to make the general phantom for practical X-ray photography less expensive and easier. We would like to use a skeleton model that was produced based on CT image data using a 3D printer of FDM (Fused Deposition Modeling) method as a phantom for general X-ray imaging. 3D slicer 4.7.0 program is used to convert CT DICOM image data into STL file, convert it to G-code conversion process, output it to 3D printer, and create skeleton model. The phantom of the completed phantom was photographed by X - ray and CT, and compared with actual medical images and phantoms on the market, there was a detailed difference between actual medical images and bone density, but it could be utilized as a practical phantom. 3D phonemes that can be used for general X-ray practice can be manufactured at low cost by utilizing 3D printers which are low cost and distributed and free 3D slicer program for research. According to the future diversification and research of 3D printing technology, it will be possible to apply to various fields such as health education and medical service.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.364-371
• /
• 1997

Silicon trench etching has been carried out using a magnetically enhanced reactive ion etching system in HBr plasma containing He-$O_2$, $CF_4$. The changes of etch rate and etch profile, the degree of residue formation, and the change of surface chemical state were investigated as a function of additive gas flow rate. A severe lateral etching was observed when pure HBr plasma was used to etch the silicon, resulted in a pot shaped trench. When He-$O_2$, $SiF_4$ additives were added to HBr plasma, the lateral etching was almost eliminated and a better trench etch profile was obtained. The surface etched in HBr/He-$O_2/SiF_4$ plasma showed relatively low contamination and residue elements compared to the surface etched in HBr/He-$O-2/CF_4$plasma. In addition, the etching characteristics including low residue formation and chemically clean etched surface were obtained by using HBr containing He-$O_2$ or $SiF_4$ additive gases instead of $CF_4$ gas, which were confirmed by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM).

• Korean journal of communication and information
• /
• v.66
• /
• pp.133-158
• /
• 2014

This research followed the major South Korean newspapers, Chosun, JoongAng, HanKyoreh and KyungHyang newspapers to study their relationship with advertisement - on how they use advertisement to what degree and which views they take, also looking into the quantity of advertisement. The results of analysis is as thus: first, the more advertised companies tended to have more news reports about them overall. Also, advertised companies were usually shown in positive light rather than a negative one. The most notable constructive commonality found in the positively advertised companies were that they were not usually introduced upfront through the title of the news article (or within the body of the article) but rather mentioned within the media frame. The reasons for this pattern in advertising is to make bias towards JoongAng which is obvious for pro companies, especially for the Chosun which is known for being neutral in most company matters even for the HanKyoreh, KyungHyang known for their usual negative attitude towards private companies.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.220-227
• /
• 2019

Purpose: The purpose of this study was to compare the degree of tooth preparation abilities of students according to three self-assessment methods. Materials and Methods: forty-eight sophomores in Kyungpook National University College of Dentistry were divided into three experimental groups. Students performed tooth preparation of the left mandibular first molar for full gold crown. They performed self-assessment using the three methods (visual, digital, and putty index self-assessment group), and reperformed tooth preparation. An intraoral scanner was used to scan each tooth model (prepared tooth and unprepared tooth), and data were acquired in standard tessellation language (STL) file format. The STL files of prepared tooth and unprepared tooth were superimposed using the 3-dimensional analysis software (Geomagic control X). And the reduction amount was measured. In the statistical analysis, all values of reduction amount were analyzed with the Wilcoxon signed rank test and Kruskal-Wallis test (α = 0.05). Results: The three self-assessment methods showed statistically significant differences (P < 0.001). The putty index self-assessment group showed the highest reduction in error than the digital self-assessment method. Conclusion: Within limitations of this study, students showed significant differences in improvement of tooth preparation ability according to the three self-evaluation methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.149-158
• /
• 2006

We proposed a method for improving a performance of TCP downstream between a desktop PC as a fixed host and a PDA as a mobile host in a wired and wireless network based on IEEE 802.11x wireless LAN. With data transmission between these heterogeneous terminals a receiving time during downstream is slower than that during upstream by 20% at maximum. The reason is that their congestion window size will be oscillated due to a significantly lower packet processing rate at receiver compared to a packet sending rate at sender. Thus it will cause to increase the number of control packets to negotiate their window size. To mitigate these allergies, we proposed two distinct methods. First, by increasing a buffer size of a PDA at application layer an internal processing speed of a socket receive buffer of TCP becomes faster and then the window size is more stable. However, a file access time in a PDA is kept nearly constant as the buffer size increases. With the buffer size of 32,768bytes the receiving time is faster by 32% than with that of 512bytes. Second, a delay between packets to be transmitted at sender should be given. With an inter-packet delay of 5ms at sender a resulting receiving time is faster by 7% than without such a delay.

• Radiation Oncology Journal
• /
• v.15 no.1
• /
• pp.71-78
• /
• 1997

Purpose : To collect beam data for dynamic wedge fields using conventional measurement tools without the multi-detector system, such as the linear diode detectors or ionization chambers. Materials and Methods : The accelerator CL 2100 C/D has two photon energies of 6MV and 15MV with dynamic wedge an91es of 15o, 30o, 45o and 60o. Wedge transmission factors, percentage depth doses(PDD's) and dose Profiles were measured. The measurements for wedge transmission factors are performed for field sizes ranging from $4\times4cm^2\;to\;20\times20cm^2$ in 1-2cm steps. Various rectangular field sizes are also measured for each photon energy of 6MV and 15MV, with the combination of each dynamic wedge angle of 15o 30o. 45o and 60o. These factors are compared to the calculated wedge factors using STT(Segmented Treatment Table) value. PDD's are measured with the film and the chamber in water Phantom for fixed square field. Converting parameters for film data to chamber data could be obtained from this procedure. The PDD's for dynamic wedged fields could be obtained from film dosimetry by using the converting parameters without using ionization chamber. Dose profiles are obtained from interpolation and STT weighted superposition of data through selected asymmetric static field measurement using ionization chamber. Results : The measured values of wedge transmission factors show good agreement to the calculated values The wedge factors of rectangular fields for constant V-field were equal to those of square fields The differences between open fields' PDDs and those from dynamic fields are insignificant. Dose profiles from superposition method showed acceptable range of accuracy(maximum 2% error) when we compare to those from film dosimetry. Conclusion : The results from this superposition method showed that commissionning of dynamic wedge could be done with conventional dosimetric tools such as Point detector system and film dosimetry winthin maximum 2% error range of accuracy.

• The KIPS Transactions:PartA
• /
• v.11A no.3
• /
• pp.149-156
• /
• 2004

As software is large and sophisticate, in order to increase the productivity and efficiency of programs in programming development environments, it is necessary to support the integrated system that offers user interface integrated editing, compiling, debugging, and running steps. The key tool in such environments is an incremental translation. In this paper, in order to increase the productivity and reusability of software, the goal is to construct the integrated incremental interpretation system that supports friendly user interface with editor, debugger, and incremental interpreter. We define the new object-oriented language, IMPLO(IMPerative Language with Object) using EBNF notation, and construct the integrated incremental interpretation system using incremental interpreter of the language. To do so, we extend attribute grammars for specifying static semantics and present new action equations to describe the dynamic semantics. We executed the incremental interpretation by using analyzing the dynamic semantics and then implemented integrated incremental interpretation system with editor and debugger in C, Lex and Yacc using X windows on SUN. We obtain about 50％ speedups in case of incremental execution time for example programs.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.5
• /
• pp.1233-1246
• /
• 2018

With the proliferation of smart mobiles, disassembly techniques for position-independent code (PIC) composed of ARM architecture instructions in computer security are becoming more important. However, existing techniques have been studied on x86 architecture and are focused on solving problems of non-PIC and generality. Therefore, the accuracy of the collected address information is low to apply to advanced security technologies such as binary measurement. In this paper, we propose a disassembly technique that reflects the characteristics of PIC composed of ARM instructions. For accuratly collecting traceable addresses, we designed value-set analysis having symbol-form domain. To solve the main problem of disassembly, we devised a heuristic using the characteristics of the code generated by the compiler. To verify the accuracy and effectiveness of our technique, we tested 669 shared libraries and executables in the Android 8.1 build, resulting in a total disassembly rate of 91.47%.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.440-448
• /
• 2011

The needs for the OpenGL-family of the rendering library standards are highly increasing, especially for the graphical human-machine Interface on the various systems including smart phones and personal information devices. Additionally, in the case of safety-critical market for avionics, military, medical and automotive applications, OpenGL SC, the safety critical profile of the OpenGL library plays the major role for the graphical interfaces. In this paper, we represent our OpenGL SC emulation library on the OpenGL 1.x rendering pipeline which is widely available on the existing embedded systems, to provide the features of OpenGL SC standard cost-effectively. Our method can provide the OpenGL SC features at the low development cost on the embedded systems, and its implementation is also one of the fundamental elements for the emulation of embedded systems in the PC environment. Our final result now works on both of Linux-based and VxWORKS systems, showing correct execution results at the reasonable speed.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.65-76
• /
• 2014

In this paper, we propose a high-level programming language for packet processing called eFlowC and it supporting programming development environment. Based on the C language which is already familiar and easy to use to program developers, eFlowC maintains the similar syntax and semantics of C. Some features that are unnecessary for the packet processing has been removed from C, eFlowC is highly focused on performing packet data, database, string byte information checking and event processing. Design high-level programming languages and apply an existing language or compiler technology, language function and compilation process that is required for packet processing will be described. In order to use the DPIC device such as X11, we designed a virtual machine eFVM that takes into account the scalability and portability. We have evaluated the utility of the proposed language by experimenting a variety of real application programs with our programming environment such as compiler, simulator and debugger for eFVM. As there is little research that devoted to define the formats, meanings and functions of the packet processing language, this research is significant and expected to be a basis for the packet processing language.