• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.51-57
• /
• 2012

The purpose of study is to understand the possibility of biogrout of soil induced by bacteria. Microbial Calcium Carbonate Precipitation(MCP) has been analysed using the microorganism Bacillus Pasteurii. In order to understand the biogrout of soft ground treated with microbial calcium carbonate precipitation, four types of specimens(sterilization soil, non-sterilization soil, reaction solution and microorganism solution with pre-treatment mix and reaction solution and microorganism solution with post-treatment mix) were made. Scanning Electron Microscope(SEM), EDX and X-ray diffraction(XRD) analyses were performed on the soft ground specimens. On the basis of the preliminary results, it appears that microbial treatment methods using calcium carbonate precipitation may be possible to improve property of biogrout.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.436-445
• /
• 1996

비정질 실리콘박막의 고상결정화 특성에 대한 비정질 박막의 증착방법, 수소화 정도, 표면결정 활성화 에너지 변화 및 열처리 환경 영향을 X선 회절, EDAX, Raman 분광 분석으로 조사하였다. 저온(58$0^{\circ}C$)열처리 corning 시료에서 기판 barium(Ba), aluminum(AI) 성분의 막내 확산 임계열처리시간 및 확산에 기인 한 불안정 결정화 특성을 관찰하였다. 화학기상증착 석영 수소화 시료에서 hard damage 기계적 활성화 효과로 얻어진 조대결정립 결정화 특성을 X선 회절의 (111) 배향 상대강도 변화로 관찰 할 수 있었으며, 이는 활성화 효과에 의한 고상 결정화 시 핵생성과 성장속도변화로 다결정 실리콘의 전기적물성 향상 가능성을 보여주었다. Soft damage, bare 활성화 처리 수소화막의 결정화는 비정질 상의 혼재, 박막 응력등의 저품위 입계특성 및 미세결정립 성장 특성으로 관찰되었으나, 활성화 전처리에 의한 저온 및 고온(875$^{\circ}C$)단시간(30분) 결정화는 확인 되었다. 스퍼터링 비수소화 막의 결정화는 상변태 상태의 Raman 결정피크로 분석 되었으며, 결정화 거동에 선행막의 스퍼터링 및 비수소화 영향은 활성화효과에 관계없이 불완전 저품위 결정특성으로 확인되었다. AFM 표면형상은 3차원 island 성막특성을 보여주었고 표면거칠기정도는 높은 것으로 관찰되었다.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.205-210
• /
• 2000

Measurements of phase identification and degree of orientation for fine-grained (about 0.3 mm in diameter) minerals in rock samples performed by micro-area X-ray diffractometer.$Al_{2}SiO_{5}$ polymorphs (andalusite, kyanite and sillimanite) were chosen for the measurements and target minerals were existed on thin sections. Micro-area X-ray diffractometer is composed of 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillating goniometer and position sensitive proportional counter (PSPC). $CuK_{\alpha}$ radiation was used as X-ray source and a pin hole ($50\;\mu\textrm{m}$$ in diameter) collimator was selected to focus radiation X-ray onto the target minerals. Phase identification and diffracted X-ray peak indexing were carried out by 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillation measurement. Then, 2(${\omega}\;{\phi}$)-circle oscillation measurement was made for the purpose of searching the prevailing lattice plane of the minerals on thin section surface. Finally, for a selected peak by 2-circle oscillation measurement, X-ray pole figure measurement was executed for the purpose of check the degree of orientation of the single lattice direction and examine its pole distribution. As a result of 3-circle oscillation measurement, it was possible that phase identification among $Al_{2}SiO_{5}$ polymorphs. And from the results of 2-circle oscillation measurement and X-ray pole figure measurement, we recognized that poles of andalusite (122), kyanite (200) and sillimanite (310) lattice plances were well developed with direction normal to each mineral surface plane respectively. Therfore, the measurements used with micro-area X-ray diffractometer in this study will be a useful tool of phase identification and degree of orientation measurement for fine-grained rock forming minerals.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.676-679
• /
• 2010

Nano composite particles were synthesized from a bulk ZrVFe alloy ingot by transferred DC thermal plasma. Effects of plasma gas flow rate on the characteristics of the produced nano composite particles were investigated. The characteristics of the synthesized powder were analyzed by field scanning electron microscopy (FE-SEM), light scattering particle size analyzer (PSA), energy dispersive X-ray spectroscopy (EDS), X-ray diffractometer (XRD), and Brunauer-Emmett-Teller (BET) surface area analyzer. As the flow rate of plasma gas increased from 20 L/min to 40 L/min, the average particle size decreased from 91 nm to 55 nm, the particle size distribution became narrower, the surface area increased from $200\;m^2/g$ to $255\;m^2/g$, the particle composition was nearly unaffected, and the particle crystallinity was improved.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.1047-1051
• /
• 1995

수소동위원소의 분리공정은 월성원자력발전소의 보충용 중수제조공정에 필수적이며 백금촉매를 이용한 교환반응공정이 가장 경제적인 것으로 알려져 있다. 본고에서는 백금촉매 개발의 일환으로 담체로서 실리카라이트를 제조하여 결정성을 X선 회절분석기를 이용하여 측정하였으며 이 담체에 일반적인 함침법으로 백금을 담지시켜 처리한 Pt/Silicalite 촉매의 백금분산도를 수소 흡착법을 이용하여 측정하였다. 측정실험 결과 다공성의 실리카라이트가 제조되었고 일반적인 함침법에 의해 제조된 촉매의 백금분산도는 매우 낮음을 확인하였다.

• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.305-309
• /
• 1993

Thermal stability of Co/Cu artificial superlattice (AS) prepared by RF-magnetron sputtering and the effect of low temperature annealing on the magnetoresistance of the AS have been investigated in this work. Dependence of annealing behavior on the Cu spacer thickness, Fe underlayer thickness, and kind of the underlayer was examined and the relationship between the interfacial reaction and magnetoresistance was studied. It turned out that when Co/Cu AS was annealed at low temperature ($<450^{\circ}C$), the magnetoresistance could increase in the case of AS with thick spacer Cu ($20~25\AA$) layer, whereas it decreased in the case of AS with thin spacer Cu ($7\AA$) layer, which of the former is in contrast with previous reports and the latter in consistent with them. The increase of magnetoresistance is due to increase of interfacial atomic sharpness, which is supported by low angle X-ray diffraction analysis. The thermal stability of Co/Cu AS was better in the case of thick Fe underlayered AS. Interfacial reaction (separation of intermixed Co and Cu) could be observed at lower temperature for (200)-textured samples than for (111)-textured samples, which can be interpreted in terms of interdiffusion kinetics depending on the crystallographic orientation.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.215-222
• /
• 2003

The Rietveld structure refinement for the natural trioctahedral mica, phlogopite-1M (Parker Mine, Quebec, Canada) has been done by high resolution neutron powder diffraction at $25^{\circ}C$ and -263$^{\circ}C$. The structural formula of phlogopite determined by electron probe microanalysis is $K_2$(M $g_{4.46}$F $e_{0.83}$A $l_{0.34}$ $Ti_{0.22}$)(S $i_{5.51}$A $l_{2.49}$) $O_{20}$(O $H_{3.59}$ $F_{0.41}$). Cell parameters are a=5.30∼5.31 $\AA$, b=9.18∼9.20 $\AA$, c=10.18∼10.21 $\AA$, $\beta$=100.06∼100.08$^{\circ}$. Refinements converged to R values in the range of $R_{p}$=2.35%, $R_{wp}$=3.01%, respectively. In this study, the OH bond length is calculated to 0.93 $\AA$ at room temperature and 1.03 $\AA$ at -263$^{\circ}C$, and the angles between OH vector and (001) plane are obtained 93.4$^{\circ}$∼93.6$^{\circ}$. The decrease in the length of OH with the increase in temperature should be due to the hydrogen bonding in the structure of phogopite.e.e.f phogopite.e.e.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.183-183
• /
• 2012

최근 환경오염과 천연자원의 고갈로 태양광을 이용한 수소와 산소를 제조하는 광전기화학적 물분해 반응이 많은 관심을 받고 있다. 본 연구에서는 란타늄 알루미네이트 단결정 기판 위에 니오븀을 도핑한 이산화 티타늄을 증착 시킨 후 two-step sol-gel법을 이용하여 아나타제 이산화티탄늄 나노막대를 성장시켰다. 성장시킨 아나타제 티타늄산화 막대는 구조적인 특징과 모양, 크기를 전구체 용액의 수소이온화지수(pH)를 조절함으로써 변화 시킬 수 있다. 니오븀을 도핑한 이산화 티타늄 기판 위에 높은 수소이온화지수(pH 10 이상)을 이용하여 우선 배향된 아나타제 나노 막대를 성장 시킬 수 있으며, 주사전자현고해상도 투과전자현미경, x선 회절 분석기를 통해 구조적 특성을 평가하였다. 또한 수소이온화지수를 조절(pH 9)하여 만든 다결정질 아나타제 나노구형과 우선배향된 나노막대의 전하이동특성을 분석하기 위하여 기체 색층분석법(GC), 광전기화학법(PEC), 임피던스를 측정하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.130-131
• /
• 2007

초고경도 박막을 얻기 위해 질화물을 이용한 CrN / CrAlN 초격자 박막을 CFUBM 시스템을 통해 합성하였다. 초격자 박막의 각층의 두께 (${\lambda}$)는 기판의 회전 속도를 이용하여 제어하여 4.4 에서 44.1 nm 까지 합성하였다. 박막의 결정구조 및 미세구조를 분석하기 위하여 고분해능 X선 회절 분석기 (HR-XRD)를 이용하였으며, 박막의 기계적 성질은 나노 인덴터와 ball on disk tester를 통해 분석하였다. CrN / CrAlN 초격자 박막은 각층의 두께 (${\lambda}$)에 따라 28.77 GPa에서 31.97 GPa의 경도 값을 나타내었으며, 미세구조와 기계적 특성이 변화를 관찰할 수 있었다.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.609-616
• /
• 2001

The application of microwave technology to synthesis of polymer in solvent media has been shown by the synthesis of copper phthalocyanine (CUPc). The increase of synthetic yield-was demonstrated successfully in this study. A power variable microwave synthetic system has been developed with modifying cavity of domestic microwave oven and attaching microwave power controller. The properties of the specimen synthesized at various condition under the conventional thermal processing and microwave processing has been characterized by the means of chemical analysis, X-ray diffractometry (XRD), scanning electron microscopy (SEM), and particle size analysis (PSA).