• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.223-231
• /
• 2022

Spectroscopies are the most widely used for understanding the crystallographic, chemical, and physical aspects of materials; therefore, numerous commercial and non-commercial software have been introduced to help researchers better handling their spectroscopic data. However, not many researchers, especially early-stage ones, have a proper background knowledge on the choice of fitting functions and a technique for actual fitting, although the essence of such data analysis is peak fitting. In this regard, we present a practical guide for peak fitting for data analysis. We start with a basic-level theoretical background why and how a certain protocol for peak fitting works, followed by a step-by-step visualized demonstration how an actual fitting is performed. We expect that this contribution is sure to help many active researchers in the discipline of materials science better handle their spectroscopic data.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.183-188
• /
• 2008

We have studied the chemisorption of oxygen at room temperature on Fe layers deposited on Pt(111) substrates by using core-level X-ray photoelectron spectroscopy. It was found that the oxygen atoms are chemisorbed when the thickness of the Fe layers is not larger than 6 monolayers. Upon post-annealing, it was found that part of the chemisorbed atoms are desorbed at a temperature range 600 - 700 K, after which the intermixing between Fe and Pt atoms occurs. The overall trend of this intermixing was very similar to the Fe/Pt(111) surface without oxygen exposure. The remaining oxygen adatoms, the amount of which is about a half of the total, were found to be eventually desorbed from the surface upon post-annealing at 1000 K. The binding energy of this phase was higher than that of the oxygen atoms desorbed at lower temperatures by 1.3 eV.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.697-704
• /
• 2016

Coal modified by acid treatment was investigated to analyze the correlation between the cell performance and electrochemical parameters in a direct carbon fuel cell (DCFC). The fuels were subjected to thermogravimetry analysis, gas adsorption test, and X-ray photoelectron spectroscopy to investigate the fuel properties and surface characteristics. After the treatment of raw coal, the thermal reactivity of the treated fuels increased, and the specific surface area decreased, though the mean pore diameters of three fuels were similar. The coal treated by $HNO_3$ showed the highest ratio of oxygen to carbon, and also an increase in the surface oxygen groups on the fuel surface. Through comparison between the fuel surface properties and electrochemical performance, it was confirmed that the surface oxygen groups have an influence on the improvement in the DCFC performance.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.311-321
• /
• 2007

We have researched the chemical defects of NiO ultrathin films grown on Ag(001) by x-ray photoelectron spectroscopy. In particular, O 1s and Ni 2p spectra were analyzed consistently with control film thickness, $O_2\;and\;H_2O$ partial pressure and substrate temperature. As a result, we could identify each chemical defect. In addition, we suggest the optimum growth condition to minimize the defect density.

• Journal of the Korean Magnetics Society
• /
• v.26 no.6
• /
• pp.185-189
• /
• 2016

By employing photoemission spectroscopy (PES) and soft X-ray absorption spectroscopy (XAS), the electronic structure of the candidate half-metallic antiferromagnet of $Mn_3Ga$ Heusler compound has been investigated. We have studied two ball-milled $Mn_3Ga$ powder samples, one after annealing and the other without annealing, respectively. Based on the Mn 2p XAS study, we have found that Mn ions are nearly divalent in $Mn_3Ga$ and that the Mn ions having the locally octahedral symmetry and those having the locally tetrahedral symmetry are both present in $Mn_3Ga$. We have found relatively good agreement between the measured valence-band PES spectrum of $Mn_3Ga$ and the calculated density of states, which is in agreement with the half-metallic electronic structure of $Mn_3Ga$.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.96-102
• /
• 2010

Effects of specimen area on the corrosion rate of low alloy steel were studied in sulfuric acid solution. The corrosion behavior of specimen was tested by electrochemical impedance spectroscopy (EIS), linear polarization resistance measurement (LPR) and potentiodynamic polarization measurement. The surface was analyzed by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electron probe X-ray micro analyzer (EPMA). As surface area was increased, corrosion rate was increased by the effect of small anode-large cathode.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.71-75
• /
• 2022

Graphene oxide was stirred with a ZnCl₂:NaCl electrolyte and electrochemically coated by cyclic voltammetry to simplify the electron transpfer layer film forming process for organic solar cells and to fabricate an organic solar cell having it. The device structure is FTO/ZnO:graphene/P3HT:PCBM/PEDOT:PSS/Ag. Morphology and chemical properties of ETL were confirmed by scanning electron microscopy(SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. As a result of XPS measurement, ZnO metal oxide and carbon bonding were simultaneously confirmed, and ZnO and graphene peaks were confirmed by Raman spectroscopy. The electrical characteristics of the manufactured solar cell were specified with a solar simulator, and the ETL device coated twice at a rate of 0.05 V/s showed the highest photoelectric conversion efficiency of 1.94%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.80-80
• /
• 2010

X선 광전자 분광법을 이용하여 Pt(110) 표면 위에 증착된 Ni 초박막의 합금 형성에 대한 연구를 수행하였다. 각각 3 ML, 6 ML Ni 초박막을 $5{\times}10-9$ Torr 이하의 초고진공에서 증착된 것을 확인하고 후열처리 과정에 따른 Ni층의 변화와 합금형성에 따른 내각준위 스펙트럼을 관찰하였다. 증착된 Ni 초박막은 증착 후 전자구조 변화에 따른 선형변화가 일어나고, 590 K부터 섞이기 시작함을 내각준위 스펙트럼의 변화들로부터 알 수 있었다. 열처리 온도가 증가하면서 계면에 Ni-Pt 합금이 형성되었음은 Pt 4f 봉우리의 FWHM 변화부터로 확인할 수 있었으며 Ni 2p3/2 의 satelite 구조의 상대적 세기가 590 K부터 급격히 증가하여, 전자구조가 변화함을 알 수 있었다. Valence Band 스펙트럼의 변화로 계면의 Pt d전자들의 상태밀도 변화도 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2005

PTFE (polytetrafluoroethylene) thin films were prepared from the pellets of the graphite doped PTFE via pulsed laser ablation with 1064 nm Nd:YAG laser. The graphite powder converts the absorbed photon energy into thermal energy which is transmitted to nearby PTFE. The PTFE is decomposed by thermal process. The deposited films were transparent and crystalline. SEM (scanning electron microscopy) and AFM (atomic force microscopy) analyses indicated that the film surface morphology changed to fibrous structure with increasing thickness. The fluorine to carbon ratios of the film were 1.7 and molecular axis was parallel with (100) Si-wafer substrate. These results obtained by XPS (X-ray photoelectron spectroscopy), FTIR (fourier transform infrared spectroscopy) and XRD (X-ray diffraction).

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.240-246
• /
• 1992

The electronic structure of oxygen atom of cation-exchanged zeolite was investigated by utilizing X-ray photoelectron spectroscopy(XPS). The obtained $O_{1S}$ spectra of $Na^+-$, $Fe^{2+}-$ and $Fe^{3+}-$ exchanged zeolite X and Y were deconvoluted to demonstrate electronic binding energy of framework oxygens. There were 2-3 bands in each spectrum. The characteristics of separated band have been studied in terms of binding energy and relative area of $O_{1S}$ electron with respect to the exchanged cation. Those bands were assigned to the bridged oxygen in framework (band 1), cation bonded oxygen in cationic site (band 2) and oxygen in water coordinated to the cation (band 3) each other. The band 1 occupying the majority area of $O_{1S}$ spectrum was shifted to higher region on binding energy according to the decrease of Al content in zeolite.