• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.683-692
• /
• 2000

The volatile organic compounds emitted from food wrapping films when it was used at high temperatures. However, the testing method based on solvent extraction may not be suitable for determination of volatile organic compounds from food wrapping films. Therefore, thermal extraction device was investigated in the study for reflection of actual usage conditions at home and restaurant. In this study, PVC food wrapping films were exposed to normal use condition controlled from $50^{\circ}C$ to $120^{\circ}C$ and collected on sorbent trap. Then, emitted VOCs from the films were analyzed with On-column cryofocusing-GC/MS system. The major VOCs emitted from films were $C_{12}-C_{18}$ paraffinic hydrocarbons, dimethylphthalate, alkylphenols, known as endocrine disrupting chemical, such as tetramethylbutylphenol, tert-butylphenol, and nonylphenol. The concentration of tetramethylbutylphenol emitted from PVC films was $0.07ng/cm^2$ at $50^{\circ}C$, rapidly increased with temperature, $3.94ng/cm^2$ at $100^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.884-889
• /
• 1998

Amorphous silicon films of large area have been crystallized by a line shape excimer laser beam of one dimensional scanning with a gaussian profile in the scanning direction. In order to characterize the crystalline phase transition of thickness variables in excimer laser annealing(ELA), angle wrapping method was used. And also to characterize the residual stresses of crystalline phase transition in the case of angle wrapped-crystalline silicon on corning 7059 glass, polarized raman spectroscopies were measured at various laser energy density and substrate temperature. The residual stress varies from $9.0{\times}10^9$ to $9.9{\times}10^9$, and from $9.9{\times}10^9$ to $1.2{\times}10^10$dyne/${cm}^2$ of the substrate temperature at room temperature and varies from $8.1{\times}10^9$ to $9.0{\times}10^9$, and from $9.0{\times}10^9$ to $9.9{\times}10^9$dyne/${cm}^2$ of the substrate temperature at $400^{\circ}C$ as a function of direction from surface to substrate. According to the direction from the surface in liquid phase to the interface and from the interface to near the substrate in solid phase of recrystallized Si thin film, respectively. Thus, the stress is increased from(Liquid phase to solid phase) with phase transition.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.1
• /
• pp.73-87
• /
• 2004

In the designing stage, the HANBOK CHIMA is created using a flat pattern with linear shapes. However, when worn, the skirt creates a fluid and organic silhouette. According to the wearing method(wrapping), HANBOK CHIMA can create various shapes and movements. In comparison to the general skirt, It is more effective in revealing the wearer's sense of beauty. The method of wrapping the skirt from the rear is a suitable way of wearing the garment in accord with the Korean ON-DOL(온돌) culture and it creates mystique eroticism. We can devide the silhouettes according to six different period of time. The silhouette of HANBOK CHIMA is affected by the following elements: length, width, pleats, textures and the usage of underwear. [1. Koguryo (5C∼6C) - The first Tent silhouette. 2. The South Dynasty Silla (7C∼8C) - The second Tent silhouette. 3. Kyoryo dynasty (l4C) - Cylinder silhouette. 4. The first Chosun dynasty (late 14C∼17C) - Bell silhouette and Cylinder silhouette. 5. The second Chosun dynasty (mid 18C∼mid 19C) - Bell silhouette and Barrel silhouette. 6. The third Chosun dynasty (late 19C∼the beginning of 20C) - Tent, Cylinder and Bell silhouette.]

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.570-577
• /
• 2005

In this study a complete 3D surface reconstruction method is proposed based on the concept that the vertices of surface model can be completely matched to the unstructured point cloud. In order to generate the initial mesh model from the point cloud, the mesh subdivision of bounding box and shrink-wrapping algorithm are introduced. The control mesh model for well representing the topology of point cloud is derived from the initial mesh model by using the mesh simplification technique based on the original QEM algorithm, and the parametric surface model for approximately representing the geometry of point cloud is derived by applying the local subdivision surface fitting scheme on the control mesh model. And, to reconstruct the complete matching surface model, the insertion of isolated points on the parametric surface model and the mesh optimization are carried out Especially, the fast 3D surface reconstruction is realized by introducing the voxel-based nearest-point search algorithm, and the simulation results reveal the availability of the proposed surface reconstruction method.

• Journal of the Korean Society of Costume
• /
• v.62 no.2
• /
• pp.1-12
• /
• 2012

Cloths wrapped around the body have been the basis of the dress of people all over the world for centuries. This study is to research detailed modifiable fashion styling methods in history and to give ideas to people such as fashion professionals who are interested in fashion styling so that they can create modifiable fashion styling easily in fashion fields. The characteristics of modifiable fashion styling methods from ancient to middle ages are as follows. The first modifiable styling method is to expose the knots on the surface of the garments, and the knots were mainly located on the upper part of the body. The second method is a wrapping type of the modifiable styling method, which shows a lot of variant simple shapes of cloths. This method helped develop many wrapping methods over time. The third way is the fixed type of the modifiable styling method, and it uses accessories such as fibulae, belts to fix cloths, to create many different styles. The accessories are located on around either the neck or waist. The fourth method is the composite type of the modifiable styling methods mentioned above. This styling method is adapted in robe type clothes which makes the clothes look full of beautiful drapery. This study suggests that simple shapes of cloths can create enormous amount of styling which can be easily adapted and created nowadays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.356-362
• /
• 2004

Using multi wrapped copper by polyimide film for HTS transformer, the breakdown and V-t characteristics of two type models for turn-to-turn, one is point contact model, the other is surface contact model, were investigated under ac and impulse voltage at 77 K. A material that is Polyimide film (Kapton) 0.025 mm thickness is used for multi wrapping of the electrode. Statistical analysis of the results using Weibull distribution to examine the wrapping number effects on V-t characteristics under at voltage as well as breakdown voltage under ac and impulse voltage in $LN_2$ was carried. Also, survival analysis was performed according to the Kaplan-Meier method. The breakdown voltages for surface contact model are lower than that of the point contact model, because the contact area of surface contact model is wider than that of point contact model. At the same time, the shape parameter of the point contact model is a little bit larger than the of the surface contact model. The time to breakdown tn is decreased as the applied voltage is increased, and the lifetime indices slightly are increased as the number of layers is increased. According to the increasing applied voltage and decreasing wrapping number, the survival probability is increased.

• Journal of Family Resource Management and Policy Review
• /
• v.6 no.2
• /
• pp.31-52
• /
• 2002

This study classified consumers' behaviors of purchasing gifts, divided groups by the types of similar behaviors, and examined impacts of demographic variables, relevant variables in purchasing processes on those behaviors. Findings of this study can be summarized as follows. First, factors explaining consumers' behaviors of purchasing gifts were the tendency of demonstrative purchase, the level of placing values to the meaning of gifts, the level of altruism and rationality in the purchase of gifts, and the tendency of impulsive purchase. On the basis of these five factors, five distinct consumer groups showing similar behaviors of purchasing gifts based on the results of Cluster analysis were identified. Those groups were impulsiveㆍdemonstrative groups, impulsiveㆍnon-sincere groups, indifferent groups, non-impulsiveㆍdemonstrative groups, non-altruistic'ㆍrational groups, sincere groups, and altruisticㆍrational groups. Second, behaviors of purchasing gifts showed significant differences depending on gender, educational levels, occupational types, and women's employment status. Consumers with high education, professional occupation, high income tended to show the demonstrative purchase. Male consumers were not interested in the purchases of gifts and placed high values on the meanings of gifts. In contrast, female consumers showed rational behavior, but revealed the tendency of demonstrative in the purchase of gifts as well. Finally, behaviors of purchasing gifts were also different depending on the method of gathering consumer information, places of purchasing gifts, experiences of ordering paid wrapping gifts and the relevant costs, consumers' evaluations of the purchases of gifts, and degrees of satisfaction after the purchase of gifts. Impulsive'ㆍdemonstrative groups and non-impulsive'ㆍ demonstrative groups preferred departments as places of purchasing gifts and choose ordering paid wrapping gifts but showed dissatisfactions after purchases of gifts. Consumers who belongs to non-altruistic'ㆍrational groups, sincere groups, and altruistic'ㆍ rational groups tended to prefer local stores in their own villages as places of purchasing gifts and did not order paid wrapping gifts while showing high after the purchase of gifts.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.511-520
• /
• 2009

In this paper, we present a new iso-density surface reconstruction scheme based on a hierarchy on the input volume data and the output mesh data. From the input volume data, we construct a hierarchy of volumes, called a volume pyramid, based on a 3D dilation filter. After constructing the volume pyramid, we extract a coarse base mesh from the coarsest resolution of the pyramid with the Cell-boundary representation scheme. We iteratively fit this mesh to the iso-points extracted from the volume data under O(3)-adjacency constraint. For the surface fitting, the shrinking process and the smoothing process are adopted as in the SWIS (Shrink-wrapped isosurface) algorithm[6], and we subdivide the mesh to be able to reconstruct fine detail of the isosurface. The advantage of our method is that it generates a mesh which can be utilized by several multiresolution algorithms such as compression and progressive transmission.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.526-532
• /
• 2013

The effect of CNT dispersion method on rheological and electrical properties of polystyrene/carbon nanotube (PS/CNT) nanocomposites via latex technology was compared. The nanocomposites were prepared through freeze-drying the dispersed suspension comprised of CNTs and PS particles. In this study, physical dispersion method, either sodium dodecylsulfate (SDS) addition or polyvinyl pyrrolidone (PVP) wrapping, was employed to prevent the deterioration of intrinsic properties of CNT caused by chemical modification. The physical method applied to latex technology was very effective in CNT dispersion. With SDS addition, the enhancement of rheological properties was low compared to PVP wrapping because the properties of matrix were deteriorated due to the incorporation of low molecular weight SDS. The electrical percolation threshold of PS/SDS-stabilized CNT and PS/PVP-wrapped CNT nanocomposites was 0.23 and 0.90 wt%, respectively. The enhancement of electrical conductivity was low in the case of PVP wrapping because the non-conducting PVPs wrapped around CNT restricted the electrical connection between CNTs.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.1
• /
• pp.62-66
• /
• 2023

The objective of the present study was to evaluate the effect of storage type and period on the quality of rye hay. The rye "Gogu" was sown on October 15, 2020, and harvested on April 22, 2021 (heading stage). The rye hay was prepared in two wrapping conditions (wrapping and unwrapping) and two storage period (3 and 6 months). In regards to their visual appearance, the forage quality score was higher in wrapped rye hay than in unwrapped rye hay. In all groups, there was no difference in appearance between inside and outside. The moisture content of wrapped rye hay was maintained at the initial level until 6 months. However, the moisture content of unwrapped rye hay was increased at 3 months of storage, and then decreased at 6 months of storage. Crude protein content was higher in wrapped rye hay than in unwrapped rye hay, whereas NDF and ADF contents were lower within wrapped rye hay than within unwrapped rye hay (p<0.05). In conclusion, wrapping rye is effective method for long-term storage that reduces the effect of external environment.