• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1141-1148
• /
• 2017

Generally, a thermistor made by sintering a metal oxide is widely used to measure the ambient temperature. This thermistor is widely used not only for industrial use but also for medical use because of its excellent sensitivity, durability, temperature change characteristics and low cost. In particular, the normal body temperature is 36.9 degrees relative to the armpit temperature, and it is most closely related to the circulating blood flow. Previous studies have shown that body temperature changes during biomechanical changes and body temperature changes by anomalous signs or illnesses. Therefore, in this study, we propose a Lock-In-Amp design to detect minute temperature changes of clothing and thermistor wired by a preacher as a method to regularly measure body temperature in daily life. Especially, it is designed to measure the minute resistance change of the thermistor according to body temperature change even in a low-cost microprocessor environment by using a micro-processor-based Lock-In-Amp, and a jacquard and the thermistor is arranged so as to be close to the side, so that the reference body temperature can be easily measured. The temperature was measured and stored in real time using short-range wireless communication for non - restraint temperature monitoring. A baby vest was made to verify its performance through temperature experiments for infants. The measurement of infant body temperature through the existing skin sensor or thermometer has limitations in monitoring infant body temperature for a long time without restriction. However, it can be overcome by using the embroidery fabric based micro temperature monitoring wireless monitoring device proposed in this study.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.1-11
• /
• 2019

This study examined the cause of the phenomenon of shrinkage in machine-embroidered fabrics, specifically those made of thin and pliable fabrics. Four woven fabrics and two knitted fabrics were selected as samples for analysis. The fabrics selected were silk organza, flax linen, polyester chiffon, cotton batiste, polyester raschel mesh, and cotton jersey. The thickness and drapability of the fabrics were observed and the shrinkage of the various types of embroidered fabrics produced using satin & step stitch techniques were measured. Moreover, the correlation between the shrinkage of the machine-embroidered fabrics and the drapability of the original fabrics was analyzed. Also, the colorfastness of six embroidery yarns was determined. The results of the study are as follows: first, the shrinkage of machine-embroidered fabrics increased at a greater rate than in embroidered knitted fabrics as compared to rates in embroidered woven fabrics. Moreover, in terms of stitch techniques, there was a greater shrinkage rate when satin stitch was applied compared to step stitch. Second, the shrinkage rate of machine-embroidered fabrics decreased when a stabilizer was fused onto the fabric. The shrinkage rate also decreased for fabrics when fused with paper stabilizer compared to those without it, and the rate decreased at a greater amount with paper stabilizer as compared to alginate film. Third, since there was a strong correlation between the shrinkage rate of the embroidered fabric and the drapability ratio of the original fabric, it was generally the case that the more pliable the fabric was, the greater the shrinkage rate was when the fabric was embroidered. Fourth, while the embroidery yarns mainly used in machine-embroidery presented an overall excellent level of colorfastness, there was slight color migration of level 4 to level 5 when using viscose rayon.

• Journal of the Korean Society of Costume
• /
• v.60 no.10
• /
• pp.88-99
• /
• 2010

The purpose of this study is to express visual and functional diversity through modifiable design, and to suggest a methodological model. With this view, this study was aimed to departmentalize the case of knitwear in modifiable design of clothes and propose the possibility of variable knit fashion through make the most of knit's characteristics. Four wearable physical clothes using the most of flexible knits' characteristics were made for this study based on the modifiable design on the expressive tendency and analysis of plasticity. The following results were obtained. First, as modifiable knit design can create effects of several dresses in visual aspect and functional aspect, so it has practicality and functionality. Because modifiable clothes required wearer's participation, this have amusement that give enjoyment and freshness to wearer. Second, in mode of wearing, flexibility of knit is suitable character to open & close and change of wearing position. In manipulation, a prearranged plan for line of clothes and good choice of subsidiary materials are important. Third, the characteristics of knits allow using and mixing with different pattern and materials on the two sides of the same cloths except for the some of the parts. Moreover, there is no unraveled thread on the part of knits margin against woven, so it has the broad applicable range for the changeable design. Finally, the form and function, a prearranged plan for modifiable design of clothes have all contributed in creating new structure and patterns in design.

• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.106-117
• /
• 2009

The purpose of this study is to present a new vision for high value-added knit wear design by designing and producing knitted one-piece dress by digital textile printing which based on digital making a new industry, culture, and lifestyle in a new millenium. According as casual fashion is more and more popular, preferring knit wear, a key item of casual fashion, continues to increases. Therefore it is important to study knit wear design practically, try a new technique, and represent creative designs. As a method of the study, visual and textural data were investigated for theory of knit and DTP and a variety of knit design samples were illustrated Especially, to perform a study based on the industry, this researcher worked and experienced at J fashion Ltd., knit wear promotion company. Firstly, the theory of DTP was investigated and then 3 knitted one-pieces were designed and produced. The concept of design was digital geometry which represented chic and modern image in digital age. Target was city adult group from the late teens to the late twenties and keeping open mind and active lifestyle and enjoying the activity and unique characteristics of knit wear. This study has developed knitted one-piece design by DTP technique which has been generally applied to woven fabric. This is of great significant in opening a new way of high value-added knit wear design.

• Acta Via Serica
• /
• v.7 no.2
• /
• pp.39-64
• /
• 2022

Ancient Iranians highly esteemed the horse and horse tacks, one of which is the jul (saddlecloth). It is a felt, sheepskin, or woven pad placed between the horse's back and saddle. The aim of this paper is to identify and categorize jul designs in the Sāsānian period. The research questions are about the variety of jul designs and how to categorize them. This is fundamental research and the method is descriptive and analytical. Neither a jul nor a saddle-cover remains from the Sāsānian period, therefore the statistical population includes all available items, such as metal and stone items and parget and plasterworks, in which juls are recognizable. Due to the scarcity of such items, all the available samples were studied; so the sampling method is a total enumeration. This is documentary research by means of note-taking and using reliable websites; the data has been analyzed qualitatively. The results show that jul designs were not diverse in the Sāsānian period. All-over designs were dominant. In terms of pattern types, these designs are classified into five groups, each of which has its own formal and aesthetic characteristics: all-over design with a four-petal flower pattern, allover design with a checkered pattern, all-over design with a spotted pattern, allover design with a tiger stripe pattern, and all-over design with a zigzag pattern.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.414-419
• /
• 2006

The paper presents information concerning metrological and technical characteristics of KTU-Griff-Tester device, the optimization of its parameters and the cases of its application. It was defined that the behaviour of textile material during its extraction through a rounded hole depends upon its structure. Variations of geometrical shape of woven and knitted specimens can be described by mathematical expressions of shortened epicycloids and Cassini ovals. It is shown that waving process of disc shaped specimen can be predicted on the basis of the law of sine curve. The examples of textiles treatment with different types of commercial softeners are presented, herewith showing the suitability (sensitiveness) of the new device to detect the changes of textile hand. Meantime it is shown that the level of materials anisotropy can be decided on the basis of transformations of specimen's geometrical shape.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.2
• /
• pp.33-42
• /
• 2009

The purpose of this study was to research the development of jacquard fabrics by the Bi-Dan patterns of Dan-Chung as one of the traditional korean symbols. For performing this design study, it designed a surface design of the geometric images in Bi-Dan patterns using by EAT Jacquard Textile CAD system and simulated to fabrics for the clothing & bags. To consider the modern image of Bi-Dan patterns in the Dan-Chung motives, the theoretical background was made on the basic elements, compositions and symbolic meanings of Dan-Chung patterns. To merchandise the fashion items and see the visual image, these jacquard fabric simulations was processed by two-dimension modeling through YoungWoo CNI CAD. The applied weave structure was based on a single layer of 5 or 10 points-satin and a double layer of 8 points-satin. Among the fabric simulations of Bi-Dan patterns, the six simulated fabrics were woven into the real jacquard fabrics under the electronic Stabuli jacquard loom in $120{\sim}130$ picks per inch and 171 ends per inch. These developed jacquard fabrics of Bi-Dan patterns were appeared a contemporary yet ethnic feeling so that they could make use of the unique korean cultural products by the further commercialization.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.149-155
• /
• 2010

The advanced and complicated modern society recognizes image creation based on the identity of the global competitive age as the important means. The requirement for a new vision to the globally environmental problem has affected on design so that as environmentally-friendly products and technologies have been developed and original expression modes have been appeared which the medium of paper which is natural material, paper has been highlighted newly. Hanji made of mulberry fiber, a bast fiber of mulberry is a representative environment-friendly natural fiber. In addition, it has various functions similar to those of yellow earth such as emission of far infrared rays, antibiosis, deodorization, fast dry ability of sweat, and simple dyeing ability. It is Hanji threads that are produced from various processes of Hanji materials. Therefore, hanji threads are able to be both woven and knitted still remaining Hanji's excellent characteristics. In addition, it is light, bio-degradable, durable and washable, and it is an environment friendly product with the distinguished texture and sensitivity. Under the concept of 'Circle' designed the uniforms of music hall to inform that the uniforms as a media representing music hall represents the unique Sori Arts Center of Jeollabuk-do traditional style.

• Journal of Distribution Science
• /
• v.22 no.8
• /
• pp.55-63
• /
• 2024

Purpose: This study focuses on the golden banana (Kluai Hom Thong) from the Ban Khok Banana Community Enterprise Group in Sang Khom District, Udon Thani Province, Thailand. Despite its potential as an export crop and minimal disease or insect management issues, the group's products struggled to reach international markets due to lack of marketing opportunities, distribution channels, and proper packaging. The research aims to analyze and develop packaging and logos to test market potential for the group's products. Research design, data and methodology: Data was collected through questionnaires developed in conjunction with three printing and packaging design experts. Market testing involved 100 randomly sampled consumers of the group's products. Results: The new packaging design was perceived as more international, modern, and suitable as a souvenir for adults. Conclusions: Integrating ethnic elements and local materials into packaging design can enhance product appeal. For example, creating cloth bags from fabric scraps for carrying local woven products can impress consumers. This approach could help overcome market barriers and improve prospects for golden banana products in international markets while maintaining the intact ecosystem and environment of the production area. The study highlights the importance of effective packaging and branding in addressing market access challenges for local agricultural enterprises, potentially opening new opportunities for community-based businesses.

• Archives of design research
• /
• v.14 no.2
• /
• pp.163-174
• /
• 2001

William Morris(1834-1896) was the most versatile and talented of all British nineteenth century polymaths. Since his death over one hundred years ago his achievements as an artist, designer, manufacturer, shop-keeper, poet, author, publisher, printer, collector, teacher, conservationist, political activist and environmentalist have influenced the lives and work of people throughout the world. Moris is now best known for his attractive and colorful patterns. The decorating firm of Morris, Marshall, Fault & Company(Morris & Company after 1875) was established in 1861. Over the years it produced works, ranging from stained·glass windows and furniture to tapestries, carpets and printed and woven fabrics, that had great influence on the course of British design. His earliest experiments with the craft were amateurishly worked embroideries made for his own use. Before long, Morris began to produce textiles on a more commercial basis. In order to control production properly, Morris set about learning the various textiles techniques, first dyeing and blockprinting, hand-loom jacquard and eventually, carpet and tapestry weaving. This extraordinary involvement with the practical side of manufacture separated Morris from all other designers of his time and contributed in no small way to his success. Morris's designs for textiles, embroidery, dyeing, woven, carpet and tapestry were commercially produced, that are most universally admired and frequently copied today. These have a timeless quality arising from the designers respect for and knowledge of the technique. Of equal importance was his love of nature, evidence of which can be seen in even the smallest details of each of his patterns.