• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.271-286
• /
• 2015

This study presented functional designs for development of functional compression wear for men in their forties based on body muscles as well as designed 2D patterns using 3D standard body form data of men in their forties. Patterns with an optimal stretch rate were proposed through a comfort evaluation. Different material was used for different areas such as the sports ability strengthening areas including body parts that often move for sports (such as the shoulders, abdomen and lower arm), areas that require ventilation for perspiration (such as the chest and back center, and armpits), and stable form areas (such as the chest, waist and elbows). The front and back surface areas of the developed pattern was an average 102.4% size compared to the body surface area. The results indicated that the 90% reduction pattern showed changes in pressure value according to area of movement, had the best breathability when worn, and had the best, most comfortable fit compared to the other subjects. The clothing pressure values of the pattern were around 22.1-23.4mmHg for the arm area (which has a big movement range and has many muscles) and 10.4-11.8mmHg for chest and abdomen areas related to major organs and breathing, indicating appropriate clothing pressure. A compression wear top pattern with pressure appropriate to the target age range and excellent appropriateness for the body form will be developed for men in their forties. A study method will be proposed to develop design technology for ergonomic compression wear tops with excellent fit and comfort.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.626-638
• /
• 2020

In this study, protective masks were designed in varying internal volume and analyzed in regards to wearing effect. Masks were measured by surface temperature and subjective wear evaluation. Four experimental masks were created with an increasing distance between the mask center line and nose in increments. The distances were set at 0.0 cm (M0), 2.0 cm (M2), 4.0 cm (M4), and 6.0 cm (M6). The area and volume of each experimental mask was measured and both measurements had a positive correlation with the set distances. Among the experimental masks, M2 was the most breathable. The heat between the face and the mask created by exhalation was able to escape from the mask and provided the highest comfort sensation when worn. Conversely, an internal volume that is too large would decrease its comfort because repetitive breathing deforms the appearance of the mask and adversely affects its fit. Therefore, creating and maintaining the optimal internal volume of the M2 mask is important to achieve maximum thermal sensation and ease of wear.

• Fashion & Textile Research Journal
• /
• v.19 no.2
• /
• pp.134-139
• /
• 2017

This study proposes 3D printed shoe designs with patterns made by reinterpreting traditional Korean muntin patterns as customized designs that are unique to individual consumers and different from existing products. In the fashion industry, shoes with diverse designs grafted with 3D printing technology have been introduced. Artistic 3D printed shoes showcase the unique designs of designers. Functional and practical 3D printed shoes that can be worn during daily activities and during exercise have been actively developed. Traditional Korean pattern designs are also being recreated into designs reflecting the aesthetic sense of modern times with our own identity. The uniqueness of the traditional muntin patterns in geometric shapes, such as intersections of lines, rectangles, and octagons, are expressed in shoe designs with modern aesthetic senses by utilizing the traditional patterns that conform well to the modern geometric beauty of forms. This study was intended to develop 3D shoe designs that reinterpreted the motif of muntin patterns from among traditional Korean geometric patterns with a modern aesthetic sense. The octagonal patterns that express the scenery of spring can be seen through the muntins in traditional Korean-style houses were designed on the heels of shoes. Utilizing the Rhino CAD program and ProJet 660 Pro 3D printer, shoes were designed and printed. The processes for making shoes using 3D printing technology proposed in this study are significant because they represent the creation of designs in a new area. The results of this study might help in the development of 3D printed fashion products.

• The Research Journal of the Costume Culture
• /
• v.12 no.2
• /
• pp.211-223
• /
• 2004

The purpose of this study is to examine aspects of education, social activity, and sense of values in new women, categorizing the clothing habits into hair style, new modes and accessories on the basis of those. and to find out the influences of new women's attirement on clothing habit of general women, centering of 「Beol Geon Gon」 which made its first appearance in November 1926 and issued till June, 1934. First, new education became good opportunity to face and adopt new style of clothes. The school uniform of western style worn under the education system operated missionaries and clothes of returning students from studying abroad became a chance for general people to meet western clothes. Second, various style of western clothing was shown by enlargement of social activity area of new women. In the educational world and active careers such as doctor, journalist. women's libber, convenient clothing was required. The appearance of airwoman and driver showed trends that women's clothing was changing similar to men's clothing. Third, even general women started to adopt western clothes not to be old-fashioned as being threatened and weakened by the vision about marriage and love among new women, and participated in the trends.

• Journal of the Korean Home Economics Association
• /
• v.42 no.10 s.200
• /
• pp.53-61
• /
• 2004

The purpose of this study was to provide information for the manufacturers of shoes for males to develop more adequate footwear. The data was collected through a questionnaire on purchasing and wearing practices of footwear, and overall satisfaction with the shoes for males. The questionnaire survey was conducted on 237 male adults in the Cheongju area. Most of the respondents were commuting by their own cars and the average walking time in their shoes was five minutes per day. The main reasons for buying new footwear were to replace the worn out footwear or to adapt the color and design coordination with other apparel. Males generally bought footwear from sports brand retailers and individual footwear stores. The criteria for purchasing in order of considered were size, design, price, comfort, and style coordination. During the spring, autumn and winter seasons, the footwear of first choice was ordinary shoes, followed by exercise shoes, but during the summer season they wore sandals next to the ordinary shoes. Regarding the form of the shoes, they preferred classic models with round front and strings. They were satisfied with the design, color and size of the shoes, but the price, quality and durability of the material were considered to be unsatisfactory.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.10 no.1
• /
• pp.8-15
• /
• 2001

The Class III malocclusion classified in two types of Skeletal Class III and Pseudo Class III. In the case of the maxillary deficiency, the protraction H-G(facemask) with Bonded RPE can be used. For children with A-P and vertical maxillary deficiency, the preferred treatment is to move the maxilla into a more anterior and inferior position, which also increases its size as bone is added at the posterior and superior sutures. Successful forward repositioning of the maxilla can be accomplished before age 8. To resist tooth movement as much as possible, the maxillary teeth should be splinted together as a single unit. The maxillary appliance must have hooks for attachment to the facemask that are located in the canine-primary molar area above the occlusal plane. The facemask usually worn until a positive overjet of 2-5mm is achieved interincisally. Occipital chin cup is successful in those patients who can bring their incisors close to an edge-to-edge position when in centric relation. This treatment is particularly useful in patients who begin treatment with a short lower anterior facial height, as this type of treatment can lead to an increase in lower anterior facial height. If the pull of the chin cup is directed below the condyle, the force of the appliance may lead to a downward and backward rotation of the mandible.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.531-540
• /
• 2015

Objective: The objective of this research is to investigate the fundamentals of human computer interaction for wearable computers and derive technology requirements. Background: A wearable computer can be worn anytime with the support of unrestricted communications and a variety of services which provide maximum capability of information use. Key challenges in developing such wearable computers are the level of comfort that users do not feel what they wear, and easy and intuitive user interface. The research presented in this paper examines user interfaces for wearable computers. Method: In this research, we have classified the wearable user interface technologies and analyzed the advantages and disadvantages from the user's point of view. Based on this analysis, we issued a user interface technology to conduct research and development for commercialization. Results: Technology requirements are drawn to make wearable computers commercialized. Conclusion: The user interface technology for wearable system must start from the understanding of the ergonomic aspects of the end user, because users wear the system on their body. Developers do not try to develop a state-of-the-art technology without the requirement analysis of the end users. If people do not use the technology, it can't survive in the market. Currently, there is no dominant wearable user interface in the world. So, this area might try a new challenge for the technology beyond the traditional interface paradigm through various approaches and attempts. Application: The findings in this study are expected to be used for designing user interface for wearable systems, such as digital clothes and fashion apparel.

• Journal of the Korean Society of Costume
• /
• v.53 no.7
• /
• pp.69-81
• /
• 2003

This study firstly identify the characteristics of the clothes for traditional wedding ceremony from the late Chosun Dynasty (19th Century) and today through comparison. It also tries to discover what today's people are incorrectly aware of regarding the traditional wedding clothes particularly by survey. It ultimately aims to present constructive ways of solution against the illadvised and simplified deformation of the traditional wedding clothes. When comparing the traditional wedding clothes from the late Chosun and its modern counterparts, Dan-ryung and Samo-kwandae is still used for bridegroom's dress. In case of bride's dress, several items such as Yeom-eui, So-eui and Hwal-ot have been disappeared while Won-sam can be seen today. There were found many additional differences not only in type of the wedding clothes, but also in its form and constitution. Therefore, it is advisory to take the wedding clothes worn by commoners and upper class as the basic form for today's traditional wedding clothes. In addition, diversified research should be carried on to make them broadly accepted by today's life.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.345-353
• /
• 2010

The purpose of this study was to compare and biomechanical evaluate the effects of three varying functional insoles on the kinematics of the lower extremities and foot pressure distribution during gait. For this 12 subjects participated in this study and each worn the 3 functional insoles during gait which kinematics, kinetics, electromyography and foot pressures were recorded. The function on the first insole was to absorb shock and increase the dynamic stability, the second was a gel type to absorb shock, and the third was to massage the center regions of the foot sole. the results were as follows; the first insole reduced the joints range of motion and reduced muscular fatigue, the second insole reduce the maximum, total and average foot pressures. Finally, the third insole produced larger values for the contact times and contact area.

• Journal of the Korean Home Economics Association
• /
• v.43 no.1 s.203
• /
• pp.167-176
• /
• 2005

This study was intended to investigate the wearing conditions of shirts, and examine the preferred subjective sensation for shirt fabrics. A questionnaire survey was conducted on 469 university students (male students $45.3\%$, female students $54.7\%$) in the Cheongju area, Korea. Frequency, descriptive analysis, $\x^2$ and t-tests were used for data analysis. The results were as follows: Regardless of gender, most owned 4 shirts in the autumn, which were each worn once or twice week. Generally, patterned shirts were less favored than those with solid colors, regardless of gender, but the color of the shirts differed slightly according to gender. Most students gathered items from those displayed in the store as their source of information on shirts, and tended to purchase items worth $30,000\~50,000$ won at franchised stores with friends of the same gender. They almost always looked carefully at the size and brand, but the care label and fiber content were rather neglected during the purchase. While purchasing their shirts, the following elements were considered, in this order of importance: size; color; fitness; comfort; price; tactile sensation. Light, dense, soft, warm, wrinkle-free, dry and strong sensation of the shirt fabrics were the strongest preferences for a purchase. There were partially significant gender differences in the subjective sensation of shirt fabrics.