• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.117-124
• /
• 1995

The main purpose of the present study was to investigate coordinate transformation based on two different systems: one was the World Geodetic System 1984(WGS84) adopted as a reference system for GPS satellite surveying;and another was the current Korean geodetic system based on Bessel ellipsoid. For this purpose, three methods were used to determine 7 parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. The coordinate transformation was carried out using simillity transformation applied the obtained 7 parameters and the precision of transformed coordinate was evaluated. From this results, we found that Bursa-wolf model is more suitable than others for the determination of transformation parameters in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.1 no.2
• /
• pp.39-52
• /
• 1995

There are numerous mapping, charting, geodetic systems and electronic digital products defined in various local geodetic datum. It becomes a straight forward requirement to simplify the complexity by referencing all the products to a common reference globally. WGS-84 is well known as a state-of-the-art global reference system based on the use of data, techniques and technology available within American Defence Mapping Agency(DMA). Its parameters can be translated into more accurate maps, charts and geodetic positioning compared to others previously. Since Global Positioning System(GPS/NAVSTAR), which is asssociated with World Geodetic System(WGS-84)in reference frame, has been widely used, the unified geodetic system has been required for GPS users in many fields.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.47-50
• /
• 2007

Since world coordinate system is entirely used because of the revision of land surveying law, it is needed that transformation of coordinates of geo-spatial information established by korea coordinate system to be performed. It is required, however, to have a plan for transformation of world coordinate system because the coordinate system is not unified due to the geo-spatial information system using dualistic control data of both old and new data of korea coordinate system. For this purpose, in this study, I have calculated coordinate transformation coefficient per control data of korea coordinate system and proposed a plan of transforming a dualistic coordinate system which is based on control data of korea coordinate system effectively into world coordinate system through verification of accuracy of transformation per control data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.169-175
• /
• 2009

According as standard of measurement is changed to world geodetic system by surveying law revision, we need to transform previous 1/1,000 digital maps as a standards of world geodetic system. And, we should acquire standard strategy to minimize confusion and error by conversion of geodetic surveying standards. Thus, conversion of digital maps must be transformed efficiently and consistently according to notice of relevant standard. As common point, we have used 1/1,000 digital map and local geodetic system coordinates and world geodetic system coordinates that had been used in UIS business of Pusan city and, make a analysis of distortion quantity using KASM Trans Ver 2.2. As the result of distortion quantity calculation about all Pusan city, numbers of area that error is over 0.05m are 35 in case of X(N) and 43 in case of Y(E). Because some business section have especially much error, we divided into 3 areas, that was A,B,C, and analyzed. As a result of analysis, errors of more than 0.05m are occurred only 1 X(E) in the B area and 1 X(N) and 1 Y(E) in the C area. In conclusion, We think It is a good method that we consider a distortion quantity and divide a region, and transfer to world geodetic system for large area like Pusan city.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.151-167
• /
• 2015

At present cadastral surveying is being driven fort combination of digitalized cadastral map accord with real cadastral boundary between cadastral resurvey area and World Geodetic System transformation about all country. So this study is conducted to newly establish items being needed in making digitalization of parcel boundary points based on the World Geodetic System in registration conversion surveying. For this study firstly management of mountainous districts Act, related laws and registration conversion-related laws and regulations are reviewd. Secondly, economical, administrative validation by using data from 12-branch companies of LX is analyzed. Thirdly, surveying method and procedure were established through experimental surveying on the two cases such as digital and analog area. Finally, through investigating standard of estimate about cadastral surveying, it was calculated amendment of registration conversion surveying fee based on World Geodetic coordinate System.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.401-412
• /
• 2014

This study is purposed on showing an effective process for coordinate transformation of cadastral maps, based on the local datum, in the World Geodetic System (WGS) for Cadastral Reform Project (CRP). The process follows three steps: coordinate adjustment, datum transformation and distortion modeling. The first procedure is that point coordinates on local datum has to be adjusted by those GPS observed point-to-point distances, using trilateration. Secondly, the adjusted coordinates need to be transformed to WGS by applying the Affine model, while the verification of the methodology is implemented under numerical experiments. To conduct this procedure, 195 points in the same coordinate origins in Seoul and 61 points in several different origins in Incheon are used in the estimation. As a result, there are less than 2cm coordinate differences between transformed coordinates and measured ones at everywhere. Also, it is remarkable that the transformation does not depend on either of the particular common points or the sizes of computed region. Therefore, this suggested methodology is expected to easily provide identifications and corrections for points-deviations for improved quality of the cadastral map by distortion modeling through CRP.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.15-23
• /
• 2017

The WGS conversion project of cadastral drawing (promoted by the Ministry of Land) is not able to reflect the cadastral registration due to subtle differences such as area and location. When converting the digital cadastral region to the world geodetic system, the boundary point coordinates must be changed to the legal coordinate units. However, there is a phenomenon that occurs in which the minute area changes do not coincide with the area registered in the cadastral registration when the coordinate unit is changed. In this study, we have developed a method to adjust many parcels collectively by applying a passive fine-tuning method used in cadastral resurvey project to solve these problems. Total 1, total 2+1, interval 1, interval 2+1, etc. were classified based on the number of parcels that need to be considered for the range of adjustment and the area condition. The analysis of the experimental area (after developing SW for comparison of each method) showed that the total 2+1 method is suitable for the location accuracy and the interval 2+1 method is suitable for the temporal efficiency.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.537-543
• /
• 2015

In Korea, the use of world geodetic system(WGS) has been mandated in year 2010. Accordingly, the national geographic information institute(NGIS) provides the digital maps according to the WGS. Nevertheless, most of the digital geological maps are still based on the Tokyo Datum(TD). Therefore, users should conduct 2D/3D geological spatial analysis after converting the coordinates of digital geological maps to WGS. The conversion process is often tedious and troublesome for certain users. Therefore, in this study, the method to transform coordinate from TD to WGS using ArcToolbox is introduced for users not familiar with the process. For a better appreciation, the Chungju and Hwanggang-ri digital sheets of 1:50,000 scale was chosen as an example. Here, Chungju and Hwanggang-ri sheets were defined based on the TD-central origin and TD-east origin, respectively. The two sheets were merged after the transformation of TD-east origin of Hwanggang-ri to the TD-central origin, and eventually transformed to WGS-central origin. The merged map was found to match exactly with the digital map(Daeso 367041). The problem of coordinate determination in previous digital geological maps was solved effectively. The proposed method is believed to be helpful to 2D/3D geological spatial analysis of various geological thematic maps.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.393-398
• /
• 2007

According to the Korean datum change to a world geodetic system, the EDM area should be readjusted to provide consistent product over the country. The data set for EDM area is extracted from the previous KTN1987 DB and checked for the moved markers in XY network adjustment which provides quality verification. Then, EDM data set for the seven areas are rebuilt for the adjustment. Since the data is still based on the old datum, the coordinates of the data are transformed by applying the coordinate transformation parameters. Here, the transformation parameters, which were determined for the conversion of 1:50,000 topographic maps by NGII, were used. For each EDM point, the geoidal height from EGM96 model is applied to obtain the ellipsoidal height based on the GRS80. The measured distance projected onto GRS80 is adjusted using BL network adjustment by fixing 2nd order or 3rd order GPS control points. The results from the readjustment show the minimum standard error of 1.37" and the maximum standard error of 2.13". Considering the measurement accuracy of EDM (1.6" corresponding to about 2cm) and GPS position for fixed points (2cm), this result is considered to be reasonable and it is good for the practical use.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.103-115
• /
• 2024

Trilateral adjustment can complement the problem of transforming cadastral maps into World Geodetic Coordinate system. First, it is possible to determine adjusted coordinate of common points that match each other over a wide area. Second, calculations that focus on specific points can be performed. Third, a solution that maintains the shape of the regional network can be obtained through constraints. Thus, the point coordinates can be determined appropriately for the survey system. In addition, heterogeneous survey results that span regions with different coordinate origins can be calculated on a single origin coordinate. This improves the efficiency of the workflow in tranforming cadastral maps into World Geodetic Coordinate System.