• 한국디지털건축인테리어학회논문집
• /
• 제13권3호
• /
• pp.33-40
• /
• 2013

The purpose of this study is to propose an curriculum for architectural studio in university to implement BIM process, through the analysis of the advantages of the BIM tool. The limitation of this study was to analyze the case study of only half year a single university. University education in the design process, the design that can be used in applying BIM content should be universal, university education considering the special working conditions, excessive BIM-based application can be difficult. Therefore, a systematic and reliable design that can be applied to education applies BIM design process is necessary to establish. University education applying BIM design review and design proposal the various 3D visualization can be used effectively to determine. In addition, the planned representation for thinking about and drawing 3D model building, architectural space can be used for visualization, and other subjects in conjunction with structural analysis, environmental analysis, facility layout, etc. can be used.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.149-157
• /
• 2000

Tool wear in the shearing process such as blanking, piercing and trimming is very important, because it has great effects on the dimensional accuracy, working efficiency and economy. Most of tools in the shearing process have the coated layer at surface fur good wear and corrosion resistance. When the surface of tool is teated, the wear Phenomena of coated surface layer and inner layer may be different. This paper describes a computer modelling technique by the finite element method in order to investigate the wear mechanism and to predict the wear profile of Ti-N coated tool in piercing process according to the volume of Production. Wear coefficients of the coated layer and inner layer are obtained through Pin-on-Disk wear test, respectively. To verify the effectiveness of the suggested technique, the technique is applied to wear analysis in piercing recess of piston pin and simulation results are compared with experimental ones.

• 대한기계학회논문집A
• /
• 제40권4호
• /
• pp.389-395
• /
• 2016

휠로더는 건설 현장뿐만 아니라 운반, 제조업에도 다양한 용도로 범용적으로 활용된다. 따라서 작업장치 기본 설계 시에는 작업성능뿐만 아니라 버켓의 각도변화 등 작업사양을 만족시키는 설계 안을 도출 해야 한다. 본 연구에서는 다물체 동역학 해석을 통하여 휠로더 작업장치 특성 분석 프로그램을 개발하여 작업장치 기본설계 시 활용할 수 있도록 하였다. 또한 본 프로그램과 최적설계 프로그램의 연동을 통해서 Z-bar 타입 휠로더 작업장치의 작업사양을 개선하였다. 개발된 프로그램을 활용하여 작업장치 설계 시 작업장치 컨셉에 따른 기본설계방안을 도출하는데 소요되는 시간을 절감할 수 있을 것이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.196-201
• /
• 2001

This study reveals the thin sheet metal process with multi-forming die that the name is progressive die, as a pilotless type, also high precision production part is made. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming progressive die as a bending and drawing working of multi-stage and performed through the try out for thin sheet metal. Out of the characteristics of this paper that nothing might be ever seen before such as this type of research method on the all of processes of thin and high precision production part.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.311-315
• /
• 2001

This paper presents the result of basic study about corrective polishing for arbitrary surface figure. In this study, we researched polishing characteristics on the working condition of optical glass. The abrasive size, relative velocity and working pressure were selected major factors that affect polishing process. The Preston's equation which is the representative model of polishing process was used to model the unit removal shape. The Preston's coefficient and unit removal function were calculated from the polished surface. Applying these results, we have shown that the systematic corrective polishing of arbitary figure is feasible through experiments and analysis.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.134-140
• /
• 2016

Main Spindle System has effect on performance of machine tools and working quality as well as is required of high reliability. Especially, it takes great importance in producing automobiles which includes a large number of working processes. However, main spindle unit in Machine tools are often cases where damage occurs do not meet the design life due to driving in harsh environments. This is when excessive maintenance and repair of machine tools or for damage stability has resulted in huge economic losses. Therefore, this studying propose a method of accelerated life test for diagnosing and prognosis the state of life assessment main spindle system. Time status monitoring of diagnostic data - through the analysis of the frequency band signals were carried out inside the main spindle bearing condition monitoring and fault diagnosis.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.289-294
• /
• 2001

This study reveals the thin sheet metal Process with multi-forming die that the name is progressive die, also high precision production part is made. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming progressive die as a bending working of multi-stage and peformed through the try out. Out of the characteristics of this paper that nothing might be ever seen before such as this type of research method on the all of processes of thin and high precision production part.

• 산업경영시스템학회지
• /
• 제30권4호
• /
• pp.111-117
• /
• 2007

Comparing with bar-code systems, RFID systems can supply more efficient work. Using RFID systems, logistic management systems could be helped effectively to gather real-time information. It's available to reduce the working time and object's delay time, and to deal with real-time information by using RFID system. Until now, based on how many pallets used, there is few study about best workload of RFID system. Therefore, in this study, both bar-code and RFID system simulations were executed for inspection process in distribution center. As a result, following the ware pallet quantity, the total cost of both working time and other delay times were calculated and the sensitivity analysis of total cost trend was executed.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.592-598
• /
• 2005

The port, differently from general working places, is a closed area required for security, customs, and quarantine procedures. The loading and unloading is being done differently by ports, cargoes, and ships. To do loading and unloading, a lot of equipment and different types of labor are required, which flow is complicated and safe management is essential. As above mentioned the port is very unique and very deteriorated working place in its working environment. The purpose of this study is to propose ways to reduce and prevent from port accidents. As first step to do this, we have collected 923 accidents happened at Incheon Port during the period of 1994 to 2003. We have thoroughly analyzed characteristics, harmfulness, and risk of the loading/unloading they have done, as well as the accident frequency and relationship between the accidents. As second step to further analyze, We have employed DMAIC technology, an advanced process of 6 sigma presently in spotlight as the best program for management innovation. This analysis results in recognition of important accident characteristics, causes and effects analysis, critical causes of accident, and suggestions to decrease accidents.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1254-1260
• /
• 2000

There have been many developments in super precision working technique and working method up to, now. But, it is very difficult to evaluate working surface accurately without the technicians experience and judgment. Surface roughness tester using stylus was used to measure surface condition generally But this method is not so desirable because of damage on test piece caused by contact between the workpiece and the stylus sensor. As a result, non-contact method was known as a good way to carry, out this process without damage. However, this is a difficult one among the various measuring methods. So we are tying to suggest a new method using texture analysis through image processing to get a surface information in worked test piece. Co-occurrence matrix using difference of gray levels between a pixel and its neighboring one was used to study behavior of surface roughness and to J acquire data for analysis. Standard specimen was adapted to verify this research. We suggest texture information method in order to evaluate surface state for the best measurement system.