• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.63-68
• /
• 2018

The establishment of Ground Control Points (GCPs) in UAV-Photogrammetry is a working process that requires the most time and expenditure. Recently, the rapid developments of navigation sensors and communication technologies have enabled Unmanned Aerial Vehicles (UAVs) to conduct photogrammetric mapping without using GCP because of the availability of new methods such as RTK (Real Time Kinematic) and PPK (Post Processed Kinematic) technology. In this study, an experiment was conducted to evaluate the potential of RTK-UAV mapping with no GCPs compared to that of non RTK-UAV mapping. The positioning accuracy results produced by images obtained simultaneously from the two different types of UAVs were compared and analyzed. One was a RTK-UAV without GCPs and the other was a non RTK-UAV with different numbers of GCPs. The images were taken with a Canon IXUS 127 camera (focal length 4.3mm, pixel size $1.3{\mu}m$) at a flying height of approximately 160m, corresponding to a nominal GSD of approximately 4.7cm. As a result, the RMSE (planimetric/vertical) of positional accuracy according to the number of GCPs by the non-RTK method was 4.8cm/8.2cm with 5 GCPs, 5.4cm/10.3cm with 4 GCPs, and 6.2cm/12.0cm with 3 GCPs. In the case of non RTK-UAV photogrammetry with no GCP, the positioning accuracy was decreased greatly to approximately 112.9 cm and 204.6 cm in the horizontal and vertical coordinates, respectively. On the other hand, in the case of the RTK method with no ground control point, the errors in the planimetric and vertical position coordinates were reduced remarkably to 13.1cm and 15.7cm, respectively, compared to the non-RTK method. Overall, UAV photogrammetry supported by RTK-GPS technology, enabling precise positioning without a control point, is expected to be useful in the field of spatial information in the future.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.144-159
• /
• 2014

Techniques for making a single panoramic image using multiple pictures are widely studied in many areas such as computer vision, computer graphics, etc. The panorama image can be applied to various fields like virtual reality, robot vision areas which require wide-angled shots as an useful way to overcome the limitations such as picture-angle, resolutions, and internal informations of an image taken from a single camera. It is so much meaningful in a point that a panoramic image usually provides better immersion feeling than a plain image. Although there are many ways to build a panoramic image, most of them are using the way of extracting feature points and matching points of each images for making a single panoramic image. In addition, those methods use the RANSAC(RANdom SAmple Consensus) algorithm with matching points and the Homography matrix to transform the image. The SURF(Speeded Up Robust Features) algorithm which is used in this paper to extract featuring points uses an image's black and white informations and local spatial informations. The SURF is widely being used since it is very much robust at detecting image's size, view-point changes, and additionally, faster than the SIFT(Scale Invariant Features Transform) algorithm. The SURF has a shortcoming of making an error which results in decreasing the RANSAC algorithm's performance speed when extracting image's feature points. As a result, this may increase the CPU usage occupation rate. The error of detecting matching points may role as a critical reason for disqualifying panoramic image's accuracy and lucidity. In this paper, in order to minimize errors of extracting matching points, we used $3{\times}3$ region's RGB pixel values around the matching points' coordinates to perform intermediate filtering process for removing wrong matching points. We have also presented analysis and evaluation results relating to enhanced working speed for producing a panorama image, CPU usage rate, extracted matching points' decreasing rate and accuracy.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.2
• /
• pp.257-272
• /
• 2005

The purpose of this study is to provide the basic data for morality of education in home economics education. Through research on the state of morality of education, the following criteria can be achieved ; recognition of the importance, and the level of teaching performance regarding the contents of morality education in home economics instruction. The basic data were obtained by looking at the differences between the recognized importance and the level of teaching performance. Data were collected from the survey mailed to the teachers responsible for home economics area in $\lceil$Technology${\cdot}$Home Economics$\rfloor$ in middle schools in Korea. The 335 questionnaires collected were used for final analysis. SPSS/WIN 10.0program was used for calculating and analysis the frequency, percentage, average. standard deviation. Firstly, most of the home economics teachers show that they continually try to implement morality education through each home economics lesson plan. They focus their attention on the main theme of the lesson of a particular nit, that deals with family life. For example, an excerpt from a particular unit may be the 'Understanding of myself and family members'. Most home economics teachers believe that a family setting and/or schools, whether private or public institutions, are appropriate places for productive education. As well, each of these educational settings, should take complete responsibility for teaching morality of education. As a way to activate the morality education, teachers believe that working with the students and understanding the needs of their students, along with the cooperation of parents, are key factors in the teaming process. Another way is the change of teacher's perceptions and educational conditions or environment. Secondly. home economics teachers in middle school. are showing a higher level of understanding on the importance regarding the contents of morality education, which can be noticed through the high level of their teaching performances. Regarding the importance of morality education, the first priority goes to showing respect for parents and the elderly, as well as sexual ethics and respect for life must always be taken into consideration. In regards to the level of teaching performance, the first priority goes to responsibility and co-operation. Secondly. showing respect for parents and the elderly and sexual ethics will be the third. Through data achieved through this study, the majority of home economics education teachers believe that morality education in home economics education is very important and a key factor in their teaching practices.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.297-304
• /
• 2007

For large and rapid screening of high-yielding mutants of lovastatin produced by filamentous fungal cells of Aspergillus terreus, one of the most important stage is to test as large amounts of mutated strains as possible. For this purpose, we intended to develop a miniaturized cultivation method using $7m{\ell}$ culture tube instead of traditional $250m{\ell}$ flask (working volume $50m{\ell}$). For obtaining large amounts of conidiospores to be used as inoculums for miniaturized cultures, 4 components i.e., glucose, sucrose, yeast extract and $KH_2PO_4$ were intensively investigated, which had been observed to show positive effect on enhancement of spore production through Plackett-Burman design experimet. When optimum concentrations of these components that were determined through application of response surface method (RSM) based on central composite design (CCD) were used, maximum spore numbers amounting to $1.9\times10^{10}$ spores/plate were obtained, resulting in approximately 190 fold increase as compared to the commonly used PDA sporulation medium. Using the miniaturized cultures, intensive strain development programs were carried out for screening of lovastatin high-yielding as well as highly reproducible mutants. It was observed that, for maximum production of lovastatin, the producers should be activated through 'PaB' adaptation process during the early solid culture stage. In addition, they should be proliferated in condensed filamentous forms in miniaturized growth cultures, so that optimum amounts of highly active cells could be transferred to the production culture-tube as reproducible inoculums. Under these highly controlled fermentation conditions, compact-pelleted morphology of optimum size (less than 1 mm in diameter) was successfully induced in the miniaturized production cultures, which proved essential for maximal utilization of the producers' physiology leading to significantly enhanced production of lovastatin. As a result of continuous screening in the miniaturized cultures, lovastatin production levels of the 81% of the daughter cells derived from the high-yielding producers turned out to be in the range of 80%$\sim$120% of the lovastatin production level of the parallel flask cultures. These results demonstrate that the miniaturized cultivation method developed in this study is efficient high throughput system for large and rapid screening of highly stable and productive strains.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.3
• /
• pp.777-822
• /
• 2013

This study attempts to elicit the organizational strategy and operational elements of community-based agricultural management bodies as new main farm management. We analyzed the newest discussion trend, cooperated community management, between Republic of Korea and Japan based on theory of organizing regional agriculture, and also researched on the organization management and business management about cooperated management of community. In this study, the main conclusion of the organizational strategy and operational elements of community-based agricultural management bodies are as following. i) The community-based agricultural management bodies is the cooperation managed individual agriculture resources as joint stock for purposing compound goal, an expansion agricultural income, maintenance farm productivity and rural societies. ii) The domain of cooperative management focus on secondary and tertiary industry like food process, farm produce distribution, rural experience more than farm produce production. The study suggest business promotion system of village unit farmers groups, element of organization management as executive decision organization, business management, operating factor for each steps and management element of cooperation farm working. iii) The policy direction for invigoration community-based agricultural management bodies is to make facilitation for each steps instead of standardized support.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.8
• /
• pp.89-121
• /
• 1997

Many of the measures and policies advocated by supply-siders, such as lower taxation, less government intervention, more freedom from restrictive legislation and regulation, and the need for increased productivity can be found in writing the classical economist. Nor is supply-side economics a complete divorcement from Keynesian analysis. In both camps the objectives are the same-high level employment, stable prices and healthy economic growth, the means or suggestions for attaining the objectives, however, differ. Consequently, recommended economic policies and measures are different. keynesians rely primarily on the manipulation of effective demand to increase output and employment and to combat inflation. They assume ample resources to be available in order that supply will respond to demand. The supply-siders emphasize the need to increase savings, investment, productivity and output as a means of increasing income. Supply-siders assume that the increase in income will lead to an increase in effective demand. Keynesians suggest that savings, particularly those not invested, dampen economic activity. Supply-siders hold that savings, or at least an increase in after-tax income, stimulates work effort and provides funds for investment. Perhaps keynesians are guilty of assuming that most savings are not going to be invested, whereas supply-siders may erroneously assume that almost all savings will flow into investment and/ or stimulate work effort. In reality, a middle ground is possible. The supply-siders stress the need to increase supply, but Keynes did not preclude the possibility of increasing economic activity by working through the supply side. According to Keynes' aggregate demand-aggregate supply framework, a decrease in supply will increase output and employment. It must be remembered, however, that Keynes' aggregate supply is really a price. Lowering the price or cost of supply would there by result in higher profit and/ or higher output. This coincides with the viewpoint of supply-siders who want to lower the cost of production via various means for the purpose of increasing supply. Then, too, some of the means, such as tax cuts, tax credits and accelerated depreciation, recommended by suply-siders to increase productivity and output would be favored by Keynesians also as a means of increasing investment, curbing costs, and increasing effective demand. In fact, these very measures were used in the early 1960s in the United State during the years when nagging unemployment was plaguing the economy. Keynesians disagree with the supply-siders' proposals to reduce transfer payments and slow down the process of income redistribution, except in full employment inflationary periods. Keynesians likewise disagree with tax measures that favored business as opposed to individuals and the notion of shifting the base of personal taxation away from income and toward spending. A frequent criticism levied at supply-side economics is that it lacks adequate models and thus far has not been quantified to any great extent. But, it should be remembered that Keynesian economics originally was lacking in models and based on a number of unproved assumptions, such as, the stability of the consumption function with its declining marginal propensity to consume. Just as the economic catastrophe of the great depression of the 1930s paved the way for the application of Keynesian or demand-side policies, perhaps the frustrating and restless conditions of the 1970s and 1980s is an open invitation for the application of supply-side policies. If so, the 1980s and 1990s may prove to be the testing era for the supply-side theories. By the end of 1990s we should have better supply-side models and know much more about the effectiveness of supply-side policies. By that time, also, supply-side thinking may be more crystallized and we will learn whether it is something temporary that will fade away, be widely accepted as the new economics replacing Keynesian demand analysis, or something to be continued but melded or fused with demand management.

• Journal of The Korean Association For Science Education
• /
• v.19 no.3
• /
• pp.409-427
• /
• 1999

The aim of this study was to illustrate how STS-related ideas in science education have been developed historically in the context of British education, particularly focused on the period of the 19th century and the first half of the 20th century. It has been hardly considered that the basic ideas of the STS education, one of the two paradigms of current science education together with constructivism, can be traced back to the beginning of the school science education itself. far beyond some of the programs which are largely regarded as the first-developed STS programs in Britain, such as Science in Society and SISCON. The movement of Mechanics' Institute during the first half of the 19th century would be the first systematic attempt to bridge the gap between the knowledge of pure science and its practical applications, although the main target was working-class adults rather than school pupils. At the end of the first half of the 19th century, this application-focused approach of science teaching was echoed in the elementary schools by Richard Dawes, one of the early experimenters of school science. The second half of the century was in large the period of the establishment of science as one of the core elements of school curriculum, mainly by emphasizing the aspect of pure science as a means for mental training. During this period, the elements of STS education-related appeared in the subject called 'Object Lesson' in elementary schools which was practically a separate subject from those of science. After the turn of the century, triggered by the experience of World War I, the growing appreciation of the impacts of science upon society and of the necessity of the teaching of science for wider audience gave a great impact towards two new main movements, i.e. for General Science and Citizen Science. The later illustrates a typical example of the STS movement in school science during the first half of the 20th century, particularly driven by the socialistic ideas towards the relation between science and society.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.3
• /
• pp.145-168
• /
• 2007

Current researches have been proceed on CEO's Characteristics of venture business because the CEO has considered as one of the important factors for the success of venture business. But prior research on the performance of venture business has produced inconsistently in terms of CEO's characteristics. The purpose of this study is to develop a comprehensive model for the relation between the performance and a type of CEO's characteristics by a growth process of venture business, which is the main subject of analysis in venture business. Also, this study analyzes various CEO's characteristics and the effects for performance of venture business which are in the Daedeok valley. To achieve the purpose of this research, an empirical study by using research model and hypotheses including the general characteristics of venture business and CEO's demographic characteristics has been presented as a research method for relation analysis. The principal findings of the research and its significance are summarized as follows: First, it was found that there is a significant different in the performance of CEO's behavioral characteristics by the scale, type and growing step of organization for venture business. Second, it was found that there is not a significant between an academic career, management experience, foundation experience for business and related working experience of venture CEO and the performance, but there os a partially significant difference in CEO's behavioral characteristics. Third, it was found that there is a partially significant difference between CEO's behavioral characteristics of venture business and the performance by the general characteristics of organization for venture business and demographic characteristics. In conclusion, in spite of the insufficient research for venture business in Daedeok, the implications of theses findings and contributions made by this research is to confirm the characteristics factor of CEO for venture business and general characteristics of organization for venture business by multidisciplinary side. In addition, the findings provide the basis for the analyzing of managerial strong point and weak point referred to supporting system for venture business. Finally, the findings of this study suggest that the results should be a useful data for groping a solution for upbringing plans in terms of a long-term point of view.

• Asia pacific journal of information systems
• /
• v.19 no.1
• /
• pp.1-31
• /
• 2009

This paper empirically examines factors that potentially influence the success of a Web-based semantic search engine. A research model has been proposed that shows the impact of quality-related factors upon the effectiveness of a semantic search engine, based on DeLone and McLean's(2003) information systems success model. An empirical study has been conducted to test hypotheses formulated around the research model, and statistical methods were applied to analyze gathered data and draw conclusions. Implications for academics and practitioners are offered based on the findings of the study. The proposed model includes three quality dimensions of a Web-based semantic search engine-namely, information quality, system quality and service quality. These three dimensions each have measures designed to collectively assess the respective dimension. The model is intended to examine the relationship between measures of these quality dimensions and measures of two dependent constructs, including individuals' net benefit and user satisfaction. Individuals' net benefit was measured by the extent to which the user's information needs were adequately met, whereas user satisfaction was measured by a combination of the perceived satisfaction with search results and the perceived satisfaction with the overall system. A total of 23 hypotheses have been formulated around the model, and a questionnaire survey has been conducted using a functional semantic search website created by KT and Hakia, so as to collect data to validate the model. Copies of a questionnaire form were handed out in person to 160 research associates and employees working in the area of designing and developing semantic search engines. Those who received the form, 148 respondents returned valid responses. The survey form asked respondents to use the given website to answer questions concerning the system. The results of the empirical study have indicated that, of the three quality dimensions, information quality was found to have the strongest association with the effectiveness of a Web-based semantic search engine. This finding is consistent with the observation in the literature that the aspects of the information quality should serve as a basis for evaluating the search outcomes from a semantic search engine. Measures under the information quality dimension that have a positive effect on informational gratification and user satisfaction were found to be recall and currency. Under the system quality dimension, response time and interactivity, were positively related to informational gratification. On the other hand, only one measure under the service quality dimension, reliability was found to have a positive relationship with user satisfaction. The results were based on the seven hypotheses that have been accepted. One may wonder why 15 out of the 23 hypotheses have been rejected and question the theoretical soundness of the model. However, the correlations between independent variables and dependent variables came out to be fairly high. This suggests that the structural equation model yielded results inconsistent with those of coefficient analysis, because the structural equation model intends to examine the relationship among independent variables as well as the relationship between independent variables and dependent variables. The findings offer some useful implications for owners of a semantic search engine, as far as the design and maintenance of the website is concerned. First, the system should be designed to respond to the user's query as fast as possible. Also it should be designed to support the search process by recommending, revising, and choosing a search query, so as to maximize users' interactions with the system. Second, the system should present search results with maximum recall and currency to effectively meet the users' expectations. Third, it should be capable of providing online services in a reliable and trustworthy manner. Finally, effective increase in user satisfaction requires the improvement of quality factors associated with a semantic search engine, which would in turn help increase the informational gratification for users. The proposed model can serve as a useful framework for measuring the success of a Web-based semantic search engine. Applying the search engine success framework to the measurement of search engine effectiveness has the potential to provide an outline of what areas of a semantic search engine needs improvement, in order to better meet information needs of users. Further research will be needed to make this idea a reality.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2001

The utility tunnels are the important facility as a mainstay of country because of the latest communication developments. However, the utilities tunnel is difficult to deal with in case of a fire accident. When a cable burns, the black smoke containing poisonous gas will be reduced. This black smoke goes into the tunnel, and makes it difficult to extinguish the fire. Therefore, when there was a fire in the utility tunnel, the central nerves of the country had been paralyzed, such as property damage, communication interruption, in addition to inconvenience for people. This paper is based on the fire occurred in the past, and reenacting the fire by making the real utilities tunnel model. The aim of this paper is the scientific analysis of the character image of the fire, and the verification of each fire protection system whether it works well after process of setting up a fire protection system in the utilities tunnel at a constant temperature. The fire experiment was equipped with the linear heat detector, the fire door, the connection water spray system and the ventilation system in the utilities tunnel. Fixed portion of an electric power supply cable was coated with a fire retardant coating, and a heating tube was covered with a fireproof. The result showed that the highest temperature was $932^{\circ}c$ and the linear heat detector was working at the constant temperature, and it pointed at the place of the fire on the receiving board, and Fixed portion of the electric power supply cable coated with the fire retardant coating did not work as the fireproof. The heating tube was covered with the fireproof about 30 minutes.