• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.509-524
• /
• 2005

Due to the strict requirements of emerging applications, per-flow admission control is gaining increasing importance. One way to implement per-flow admission control is using an on­path resource reservation protocol, where the admission decision is made hop-by-hop after a new flow request arrives at the network boundary. The next-steps in signaling (NSIS) working group of the Internet engineering task force (IETF) is standardising such an on-path signaling protocol. One of the reservation methods considered by NSIS is reduced-state mode, which, suiting the differentiated service (DiffServ) concept, only allows per-class states in interior nodes of a domain. Although there are clear benefits of not dealing with per-flow states in interior nodes-like scalability and low complexity-, without per-flow states the handling of re-routed flows, e.g., after a failure, is a demanding and highly non-trivial task. To be applied in carrier-grade networks, the protocol needs to be resilient in this situation. In this article, we will explain the consequences of a route failover to resource reservation protocols: Severe congestion and incorrect admission decisions due to outdated reservation states. We will set requirements that handling solutions need to fulfill, and we propose extensions to reduced-state protocols accordingly. We show with a set of simulated scenarios that with the given solutions reduced-state protocols can handle re-routed flows practically as fast and robust as stateful protocols.

• International Journal of CAD/CAM
• /
• v.4 no.1
• /
• pp.47-53
• /
• 2004

The subdivision surface is the limit of recursively refined polyhedral mesh. It is quite intuitive that the multi-resolution feature can be utilized to simplify generation of NC (Numerical Control) tool paths for rough machining. In this paper, a new method of parallel NC tool path generation for subdivision surfaces is presented. The basic idea of the method includes two steps: first, extending G-Buffer to a strip buffer (called S-Buffer) by dividing the working area into strips to generate NC tool paths for objects of large size; second, generating NC tool paths by parallel implementation of S-Buffer based on MPI (Message Passing Interface). Moreover, the recursion depth of the surface can be estimated for a user-specified error tolerance, so we substitute the polyhedral mesh for the limit surface during rough machining. Furthermore, we exploit the locality of S-Buffer and develop a dynamic division and load-balanced strategy to effectively parallelize S-Buffer.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.162-166
• /
• 1997

A message server have two basic functionalities, a server role for processing the processing the user environment as well as an entity role for transferring message to other entity in message system environment. The user who is going to send and receive his important information really wants to keep his own security requests. To satisfy this requirement, message server must be enforced by two seperated security policies- one for message processing security policy under department's computer working environment, the other for send/receive security policy under message system's communication path environment. Proposed access control model gurantees the user's security request by combining constrained server access control and message system access control with multi upper bound properties which come from inheritance attributes of originating user security contexts.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.563-566
• /
• 2006

In this paper, we studied about AGVs modeling and material handling automation simulation using a virtual AGV. The proposed virtual AGV model that operates independently each other is based on a real AGV. Continuous straight-line and workstation model using vector drawing method that could easily, rapidly work system modeling are suggested. Centralized traffic control, which could collision avoidance in intersection and should not stop AGV as possible, and algorithm for detour routing which performs when another AGV is working in pre-routed path are proposed. The traffic control and the algorithm have been proved efficiently by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.103.4-103
• /
• 2001

This paper presents a scaled teleoperation scheme for 3-D microassembly on the experimental microassembly workcell. A workspace mapping between a master and a slave microrobot system is presented to teleoperatively control the microrobot system for microassembly such as peg-in-hole task. Based on this result, a scaling factor is designed and applied to the teleoperated micromanipulation for peg-in-hole task in a mesoscale. Using 3-D virtual simulator, the workspace of microrobot system, and the working path trajectory for microassembly is visually represented. The proposed method is validated through the execution of 3-D microassembly such as peg-in-hole task on the experimental microassembly workcell. The proposed method in the developed ...

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.912-918
• /
• 1994

Poor speech intelligibility in an air traffic control room is frequently a result of many, quite different causes and occasionally leads to complaints of the controller personnel. The paper describes a sequence of successful tasks performed in a local control room. The initial measurements included an investigation of the background noise (caused by fans, air condition, computer and radar equipment) and performance checks of the electronic audio and communication equipment with respect to the audio transmission behavior. The spectral composition of the noise as well as the characteristics of the audio communication path between the controllers and the pilots(which showed a loss of spectral information in the audio band due to built-in notch filters for the suppression of control tones) required adaptations of the amplitude behavior of the amplifiers through user adjustable tone controls. The radar console fans, which contributed significantly to the overall noise floor of the room, underwent a substantial reconstruction by replacing the tight mounting with an elastic double suspension, reducing the noise level by 50%. Finally, a possible source of untimely fatigue of the controllers during their working hours has been found in strong spectral components of the noise above the audio band, radiated by numerous video monitors in the control through vibrating components excited by the line frequency of the video signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.74-79
• /
• 2005

In this paper, we propose a novel approach to decentralized motion planning and conflict-resolution for multiple mobile agents working in an environment with unexpected moving obstacles. Our proposed motion planner has two characteristics. One is a real-time collision prognosis based on modified collision map. Collision map is a famous centralized motion planner with low computation load, and the collision prognosis hands over these characteristics. And the collision prognosis is based on current robots status, maximum robot speeds, maximum robot accelerations, and path information produced from off-line path planning procedure, so it is applicable to motion planner for multiple agents in a dynamic environment. The other characteristic is that motion controller architecture is based on potential field method, which is capable of integrating robot guidance to the goals with collision avoidance. For the architecture, we define virtual obstacles making delay time for collision avoidance from the real-time collision prognosis. Finally the results obtained from realistic simulation of a multi-robot environment with unknown moving obstacles demonstrate safety and efficiency of the proposed method.

• The Journal of Korea Robotics Society
• /
• v.17 no.4
• /
• pp.407-416
• /
• 2022

Multiple AMRs have been proved to be effective in improving warehouse productivity by eliminating workers' wasteful walking time. Although Multi-agent Path Finding (MAPF)-based solution is an optimal approach for this task, its deployment in practice is challenging mainly due to its imperfect plan-execution capabilities and insufficient computing resources for high-density environments. In this paper, we present a MAPF-based fleet management system architecture that robustly manages multiple robots by re-computing their paths whenever it is necessary. To achieve this, we defined four events that trigger our MAPF solver framework to generate new paths. These paths are then delivered to each AMR through ROS2 message topic. We also optimized a graph structure that effectively captures spatial information of the warehouse. By using this graph structure we can reduce computational burden while keeping its rescheduling functionality. With proposed MAPF-based fleet management system, we can control AMRs without collision or deadlock. We applied our fleet management system to the real logistics warehouse with 10 AMRs and observed that it works without a problem. We also present the usage statistic of adopting AMRs with proposed fleet management system to the warehouse. We show that it is useful over 25% of daily working time.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2660-2664
• /
• 2003

In this study, the concept of autonomous mobility is applied to a medical service robot. The aim of the development of the service robot is for the elderly assisting walking rehabilitation. This study aims that the service robot design parameter is proposed in ergonomic view. The walking assistant path pattern is derived from analyzing the elderly gait analysis. A lever is installed in the AMR in order to measure the pulling force and the leading force of the elderly. A lever mechanism is applied for walking assistant service of the AMR. This lever is designed for measuring the leading force of the elderly. The elderly adjusts the velocity of the robot by applying force to the lever. The action scope and the service mechanism of the robot are developed for considering and analyzing the elderly action patterns. The ergonomic design parameters, that is, dimensions, action scope and working space are determined based on the elderly moving scope. The gait information is acquired by measuring the guide lever force by load cells and working pattern by the electromyography signal.

• Korea Journal of Hospital Management
• /
• v.2 no.1
• /
• pp.137-161
• /
• 1997

This study purports to investigate the determinants of propensity to stay among nursing staff working at Korean hospitals. The independent variables contains three groups of determinants: environmental variables(job opportunity, spouse support, and parent support), psychological variables(met expectations, work involvement, positive affectivity, and negative affectivity), and structural variables(job autonomy, work unit control. routinization, supervisor support, coworker support, role ambiguity, role conflict, workload, resource inadequacy, distributive justice, promotional chances. job security, job hazards, and pay). The sample used in this study consisted of 329 nurses and 175 nurse aides from two university hospitals in Seoul and its surburbs. Data were collected with self-administered questionnaires and analyzed using path analysis. The results of this study indicate that: (1) the following variables, listed in order of size, have significant positive effects on propensity to stay among hospital nursing staff: job satisfaction, met expectations, supervisor support, job security, and positive affectivity, (2) the following variables, listed in order of size, have significant negative total effects on propensity to stay among hospital nursing staff: job opportunity, negative affectivity, and rutinization, (3) the model explains 44.2 percent of the variance in propensity to stay among nursing staff working at two university hospitals, and (4) managerial support for improving the job autonomy, distributive justice, and promotional opportunity for nurse aides are needed.