• Restorative Dentistry and Endodontics
• /
• 제24권4호
• /
• pp.623-627
• /
• 1999

During canal instrumentation of a curved canal, restoring force of endodontic instrument remove more dentin from the inner wall of the curvature. This effect tends to straighten the canal and thus may significantly shorten the working length. This study was to determine the mean reduction in working length after instrumentation according to the curvature. The curvature of mandibular mesial root was determined before instrumentation. 30 canals were divided into 3 groups each 10 on the basis of degree of curvature. Experimental groups as follows. In group 1, canals having curvature from 15 to 20 degrees: in group 2, canals having curvature from 20 to 30degrees; in group 3, canals having curvature above 30 degrees. Experimental teeth in all groups were accessed, and their actual working length determined by passing a size 15 K-file(IAF) just through the minor apical foramen. The canals were sequentially enlarged to size 35 with ProFile .06 series. The change of working length was calculated by measuring the tip of IAF beyond apical foramen by using stereomicroscope. The change of canal curvature following instrumentation were measured using the Schneider technique. The results were as follows. 1. The greatest changes of curvature and working length were observed in the group 3 canals(P<0.05), next were group 2 canals and group 1 canals(P>0.05). 2. Group 1 canals showed a mean reduction in 1.61 degrees and length of 0.12m respectively(P>0.05). 3. Group 2 canals showed a mean reduction in 3.42 degrees(P<0.05) and length of 0.25mm(P>0.05) respectively. 4. Group 3 canals showed a mean reduction in 7.23 degrees(<0.05) and length of 0.64mm respectively(P<0.05).

• Restorative Dentistry and Endodontics
• /
• 제36권1호
• /
• pp.59-65
• /
• 2011

연구목적: 본 연구의 목적은 서로 다른 기하학적 형태를 가진 3가지 Ni-Ti 파일, 즉 K3, NRT, Profle을 사용하여 레진 블록으로 제작된 만곡 근관에서의 apical transportation 양상 및 working length 변화를 서로 비교하는 것이다. 연구 재료 및 방법: 실험 방법은 30개의 레진 블록을 Schneider technque을 사용하여 만곡도 측정 후 각 group당 임의로 10개씩 배분하였다. 이를 각 Ni-Ti 파일을 사용하여 crown down technique으로 근관 성형하였다. 이의 분석을 위해 double radiograph superimposition method (Backman CA 1992)를 사용하고, 분석의 정확성과 일관성을 위해 특별히 고안된 jig, digital X-ray 및 apical transportation의 측정 시 CAD/CAM software를 이용하였다. Apical transportation 양은 '근단공-0.5 mm'부위로부터 0, 1, 3, 5 mm에서 측정 하였으며, working length 변화는 근관 성형 전후의 working length 변화를 측정하였다. 또 통계 처리는 각 group의 apical transportation 양과 working length 변화를 Kruskal-Wallis One Way Analysis로 분석 후 다중 비교는 Mann-Whitney U-test를 사용하였다. 결과: 각 group간 working lengh 변화 및 0, 1, 3 mm 부위에서의 apical transportation 측정 값 사이에는 유의할만한 차이가 관찰되지 않았으나(p = 0.924), 5 mm 부위에서는 K3와 Profile사이에 유의할 만한 차이가 있었다(p = 0.027). 결론: 서로 다른 기하학적인 형태를 가진 3가지 Ni-Ti 파일의 apical transportation 및 working length 변화 정도 평가시, 본 연구의 범위 내에서는 3가지 파일 모두 유의할 만한 차이를 보이지 않은 가운데 본래의 근관 형태를 잘 유지한다고 할 수 있다.

• 한국산업보건학회지
• /
• 제33권4호
• /
• pp.447-454
• /
• 2023

Objective: This study aims to investigate the impact of changes in working conditions on job-related stress and musculoskeletal disorders using the results of seven surveys conducted at a single workplace from 2004 to 2022 regarding factors hazardous to the musculoskeletal system. Additionally, the study aims to propose alternative methods of investigating factors hazardous to the musculoskeletal system. Methods: A car parts manufacturing plant where the same survey was taken seven times from 2004 to 2022 was selected and the survey data was analyzed. The main contents of the survey were weekly working hours, Borg's scale, work intensity, job-related stress, and the prevalence of musculoskeletal symptoms. The statistical analysis was performed using SAS (version 9.4). Results: The results of this study are as follows. Firstly, changes in working conditions have an impact on job-related stress. Secondly, changes in working conditions have an impact on work intensity indicators. Thirdly, changes in working conditions have an impact on the prevalence of musculoskeletal symptoms. Fourthly, even with an increase in age and length of service, job-related stress and musculoskeletal symptoms were alleviated when working conditions were improved. Conclusions: In order for measures to reduce musculoskeletal disorders to be successful, working conditions must not deteriorate, and it is necessary to demand revisions to regulations, etc. to reflect these points in the investigation of hazardous factors to the musculoskeletal system.

• Restorative Dentistry and Endodontics
• /
• 제31권1호
• /
• pp.30-35
• /
• 2006

만곡근관에서 근관형성방법에 따른 근관작업장 변화를 평가하기 위하여 발거된 대구치의 협측 또는 근심 근관 40개에서 스테인레스-스틸 수동 파일 ($MANI^{(R)}$, 일본), 니켈-티타늄 수동 파일 (Naviflex $NT^{TM}$, 미국), ProFile, 또는 $ProTaper^{TM}$ (Dentsply-Maillefor, 스위스)를 사용하여 crown-down 방법으로 30번 크기까지 근관을 형성하고 근관형성 전후의 근관작업장 및 만곡도의 변화를 관찰하였다. 근단공에 대한 10-K파일 끝의 위치변화를 AutoCAD2000 (Autodesk 사, 미국)으로 측정하고 일원변량분석법 및 Tukey's studentized range test로 통계 분석하였다. 모든 군에서 근관형성후 근관장 및 만곡도가 유의하게 감소하였으며, 치관부 근관형성시 Gates Glidden bur를 사용한 수동파일 군이 ProFile 군보다 유의하게 많은 근관장 감소를 초래하였고, 치관부 및 근단부 전체 근관형성후에는 스테인레스 스틸 수동파일 군이 ProFile 군에서보다 유의하게 많은 근관장 감소를 나타내었다 (p<0.05).

• The Journal of Korean Physical Therapy
• /
• 제29권6호
• /
• pp.303-306
• /
• 2017

Purpose: Gait variability is defined as the intrinsic fluctuations which occur during continuous gait cycles. Increased gait variability is closely associated with increased fall risk in older adults. This study investigated the influence of attention-demanding tasks on gait variability in elderly healthy adults. Methods: We recruited 15 healthy elderly adults in this study. All participants performed two cognitive tasks: a subtraction dual-task (SDT) and working memory dual-task (WMDT) during gait plus one normal gait. Using the $LEGSys^+$ system, we measured the coefficient of variation (CV %=$100{\times}$[standard deviation/mean]) for participants' stride time, stride length, and stride velocity. Results: SDT gait showed significant increment of stride time variability compared with usual gait (p<0.05), however, stride length and velocity variability did not difference between SDT gait and usual gait (p>0.05). WMDT gait showed significant increment of stride time and velocity variability compared with usual gait (p<0.05). In addition, stride time variability during WMDT gait also significantly increased compared with SDT gait (p<0.05). Conclusion: We reported that SDT and WMDT gait can induce the increment of the gait variability in elderly adults. We assume that attention demanding task based on working memory has the most influence on the interference between cognitive and gait function. Understanding the changes during dual task gait in older ages would be helpful for physical intervention strategies and improved risk assessment.

• 한국생활과학회지
• /
• 제6권2호
• /
• pp.121-131
• /
• 1997

This study was to design the clean room garment which fits for a body and adjusts well to the action. We examined the body's changes in action through a body measurment and made a sample of the clean room garment to which had adapted the body's changes in action and evaluated the function and the appearance compared with the existing the clean room garment. The followings were summery of the results : 1. Back intersyce breadth decreased, trunk length increased and the other parts were not change. At a posture of raising hands($M_3$) in comparison with an upright posture($M_0$). Back intersyce breadth, hip length and knee length increased and the other parts were a little change. At a bowing posture($M_2$) in comparison with an upright posture($M_0$). Back hip girth, knee length, hip length and leg length increased and the other parts were not change. At a working posture on a chair($M_1$) in comparison with an upright posture($M_0$). 2. The overall clean room garment was made increasing on the changes of part of a body through measuring and body measurement. 3. From the test of the function, it became known that the devised clean room garment was superior to the existing one in the parts of neck, shoulder, armpit and elbow at a working posture on a chair($M_1$), in the parts of neck, shoulder, and armpit at a bowing posture($M_2$), and the armpit at a posture of raising hands($M_3$). The appearance was better on the whole. 4. From the examination of photographs, the waist line of the devised clean room garment was not so much pulled up as that of the existing one on moving. And when sitting down on a chair, the waist line of the existing one was pulled down while that of the devised one had no change. As above, we investigated the actual conditions of wearing the clean room garment and measured the body's changes according the various actions. So we applied these results to the devised clean room garment but we couldn't research the clean mom effect of it owing to not obtaining the measuring instrument. The aspect of ergonomics liked the feeling of wearing and fitted to the action must be given consideration to the clean room garment, and simultaneously the dust-resistant effect must be taken into consideration in order to improve the quality of the goods. Therefore, we think it should be continued the research on the dust-resistant effect, material, washing method, quality control, and size along with the aspect of ergonomics.

• The Journal of Korean Physical Therapy
• /
• 제35권3호
• /
• pp.64-70
• /
• 2023

Purpose: This study investigated the influence of attention-demanding tasks on gait and measured differences in the temporal, spatial and kinematic characteristics between young healthy adults and elderly healthy adults. Methods: We recruited 16 healthy young adults and 15 healthy elderly adults in this study. All participants performed two cognitive tasks: a subtraction dual-task (SDT) and working memory dual-task (WMDT) during gait plus one normal gait. Using the LEGSys+ system, knee and hip-joint kinematic data during stance and swing phase and spatiotemporal parameter data were assessed in this study. Results: In the elderly adult group, attention-demanding tasks with gait showed a significant decrease in hip-joint motion during the stance phase, compared to the normal gait. Step length, stride length and stride velocity of the elderly adult group were significantly decreased in WMDT gait compared to normal gait (p<0.05). In the young adult group, kinematic data did not show any significant difference. However, stride velocity and cadence during SDT and WMDT gaits were significantly decreased compared to those of normal gait (p<0.05). Conclusion: We determined that attention-demanding tasks during gait in elderly adults can induce decreased hip-joint motion during stance phase and decreased gait speed and stride length to maintain balance and prevent risk of falling. We believe that understanding the changes during gait in older ages, particularly during attention-demanding tasks, would be helpful for intervention strategies and improved risk assessment.

• 소성∙가공
• /
• 제22권8호
• /
• pp.437-441
• /
• 2013

Recently, the engraving of letters or a pattern on a product surface has received more attention especially in trying to satisfy the customer requirements. Half-piecing is a protrusion forming process that pierces only 40~50% of the material thickness. In the current study, the half-piercing technique for making clear letters by protruding sheet material was selected and studied. The influence of clearance and penetration depth was investigated by measuring the camber and extruded length of a protrusion after experiments. In addition, a numerical analysis was performed for the same working conditions and compared with experimental results. It is shown that, as the clearance increases, the camber of a protrusion increases rapidly and the extruded length decreases slightly. The deformation pattern around the cutting edge during half-piercing changes from an extrusion mode to a shearing mode as the clearance changes from minus to plus values. It is also confirmed that the experimental results show a good agreement with the numerical analyses.

• 여성건강간호학회지
• /
• 제26권3호
• /
• pp.222-230
• /
• 2020

Purpose: Midwives working in hospitals (MWH) have limited roles in managing and assisting births independently. To find ways to successfully integrate midwifery into care systems, exploring midwives' work-related perceptions might be the first step. The purpose of this study was to compare professionalism and job satisfaction between Korean midwives working in birthing centers (MWBC) and MWH. Methods: A descriptive comparative design was used, querying 19 MWBC and 53 MWH in Korea. Data were accrued from October to November 2017 using the Professionalism Inventory Scale and the Job Satisfaction Scale. Results: Age, marital status, monthly income, length of career as a midwife, and length of career in the current workplace were significantly different between MWBC and MWH. The level of professionalism in MWBC showed significant differences by position at the birthing center (t=16.19, p=.001). Professionalism and job satisfaction among MWH showed significant differences depending on perceived professional performance (F=9.95, p<.001 and F=11.04, p<.001, respectively). Levels of professionalism and job satisfaction were higher for MWBC than for MWH. Conclusion: Educational programs designed to enhance professionalism and expand the role of MWH are suggested. Also, policy changes that clearly define job roles and improvement of the legal system is required to enable MWH in Korea to effectively perform their midwifery work and be properly reimbursed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1712-1717
• /
• 1991

The paper describes estimation errors of unsteady flowrate measurements due to parameter changes in a quasi-remote instantaneous flowrate measurement method (abbreviate as QIFM) and an instantaneous flowrate measurement method using two points pressure measurements (abbreviate as TPFM). By introducing error performance index, the influence of parameter changes on the accuracy, and dynamic response of the estimated unsteady flowrate are evaluated. Of four parameters, the variation of the length of the pipeline and speed of sound produce large errors in the estimated unsteady flowrate during transient periods. The effect of kinematic viscosity of the working fluid(oil) is relatively insensitive in unsteady flowrate estimation.