• 대한치과기공학회지
• /
• 제34권3호
• /
• pp.249-261
• /
• 2012

Purpose: This study was carried out in order to examine the relationship of job satisfaction and quality of life on the dental technicians and to analyze its influence. Methods: A self-reported questionnaire survey was carried out by having convenience sampling as 220 dental technicians who work in Seoul Metropolis, Gyeonggi-do Province, Daejeon and Chungnam Province from March 12, 2012 to April 13. A research tool was used questionnaire that was proved reliability and validity. It was prepared with totally 50 questions such as 12 items for subjects' general characteristics, 18 items for job satisfaction measurement, and 20 items for life quality measurement. An analysis of the collected data was computationally processed by using SPSS Win 17.0 program. An analytical technique was made by using statistical techniques such as frequency & percentage, T-test or One-way ANOVA analysis. The following are the analytical results of the collected materials. Results: As a result of analyzing research subjects' job satisfaction level, there was significant difference(P<0.05) in items of religion, hobby life, working environment, and rest time out of daily work. The whole mean in job satisfaction was indicated to be relatively high with 3.13. However, job satisfaction with social recognition, salary, and safety was indicated lowly. As a result of analyzing research subjects' life quality level, there was significant difference(P<0.05) in items of religion, hobby life, working environment, and rest time out of daily work. The whole mean in quality of life was indicated to be relatively high with 3.10. However, the satisfaction was indicated lowly in the whole life quality and the life environment sphere. As a result of analyzing correlation between job satisfaction and life quality, all variables were indicated to be positive correlation in high significance level, thereby having been indicated that the higher job satisfaction leads to the higher life quality. Conclusion: As a result of research, the dental technicians' job satisfaction was indicated to have high correlation with quality of life. An effort is judged to be necessary for establishing fair compensation system, improving welfare policy and enhancing social recognition and position in order to promote dental technicians' quality of life.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.137-142
• /
• 2018

The purpose of this study is to contribute to the improvement of indoor air quality management in dental clinic by investigating the level of indoor air quality recognition among dental clinic workers. The questionnaire survey was conducted for about 4 weeks from May 20 to June 20, 2018 in dental clinics located in Jeollanamdo area and 143 were used as the analysis data. The method of indoor air quality management in dental clinic was preferred to "natural ventilation" method and the number of natural ventilation was 1 to 2 times per day and the results of survey on indoor environment satisfaction showed that satisfaction level was lowest in noise and smell items. The types of subjective symptoms experienced by workers working at dental clinics are "cough", "eye burn", and "headache" and a survey on the degree of the relationship between subjective symptoms and indoor air quality showed that 94.4% (135) of respondents answered "very relevant" and "slightly related". As a result of multiple regression analysis, the variables affecting the indoor air quality satisfaction of the dental clinic staff were analyzed as the items such as lighting, noise, main work, number of patients, comparing indoor and outdoor air quality and among them, "comparing indoor and outdoor air quality" was analyzed as having a great influence. To improve the indoor air quality satisfaction of dental clinic worker adequate ventilation, designate the person responsible for the indoor air quality management and periodic measurement efforts will be necessary.

• 수산해양기술연구
• /
• 제56권1호
• /
• pp.45-54
• /
• 2020

In this study, an automatic system for improving the working environment and increasing production efficiency of a laver aquaculture industry in Korea was developed by combining a hydraulic control system and a load cell in a current landing work of the laver. The improved gathering laver system allowed the automatic gathering process of the laver in the sea with the hydraulic control system connected to a cutting machine of the laver on the operating ship, which has been used for gathering the laver semi-automatically in a form of the traditional farming method. The transporting process of the laver from an operating ship to the land was improved as follows. A frame installed on the operating ship and the bag nets were designed and made to hold about 1,000 kg of the laver inside. The bag nets contain the laver on the improved operating ship were tied in knots and hooked on a crane using a load cell. The weight is measured immediately by lifting the bag nets through the load cell system. Weight information is communicated to the fishermen and successful bidders through the application. The advantages of the improved system can help fishermen to fish by improving their working environment and increasing production efficiency. The field survey to improve the landing operation of the laver aquaculture was conducted in Gangjin, Goheung, Shinan, Wando, Jindo, and Haenam in South Jeonnam Province. A total of 10 sites including Gunsan in Jeonbuk Province, Daebu Island in Ansan City, Jebu Island in Hwaseong City in Gyeonggi Province, and Seocheon in Chungnam Province were searched to collect data. Prototypes of the system were tested at the auction house of laver located in Goheung, where laver collection using hydraulic control and landing using road cell could be improved.

• 한국산업보건학회지
• /
• 제27권2호
• /
• pp.97-104
• /
• 2017

Objectives: This study aims to suggest definitions in accordance with the purpose of the permissible limit system in order to suggest criteria for substances with permissible exposure limits and expanded candidate substances under the Occupational Safety and Health Act in Korea. Methods: The occupational safety and health related acts from six countries were researched, including from Korea. To understand the health hazards of substances with permissible exposure limits, health hazards were prioritized for 211 substances through working environment measurement on the basis of KOSHA's preceding research. Results: To suggest criteria for substances with permissible exposure limits and expanded candidate substances, definitions were suggested in accordance with the purpose of the permissible limit system. Based on the health hazard priorities for the working environment, selection criteria were identified. Conclusions: Three suggestions for substances with permissible exposure limits were proposed including substances where occurred serious health hazards such as carcinogenicity, germ cell mutagenicity, and reproductive toxicity to workers.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.55-61
• /
• 2014

본 연구는 고무 화학제품의 제조에 연화제로 많이 사용되며 국제암연구소(IARC)에 발암추정물질(2A)로 등록되어 있는 Biphenyl에 대해 국내 취급사업장에 대한 작업환경 측정과 근로자 노출량 산출, 그리고 유해성에 따른 위험성을 결정하였다. 노출시나리오를 바탕으로 노출량 산출 결과는 각각 $1.0{\times}10^{-2}$, $4.2{\times}10^{-4}$, $7.0{\times}10^{-6}mg/m^3$이었으며, 위해성 분류에 따라 산출한 $RfC_{work}$는 발암성 0.21, 표적독성(경구) 2.13, 표적독성(흡입) 0.53, 발달독성 $0.31mg/m^3$으로 산출되었다. 유해성 및 노출평가의 결과를 바탕으로 한 위험성은 발암성 0.57, 비발암성(발달독성) 0.39로 도출되어, 1이하의 비교적 낮은 위험도로 나타났으나, Biphenyl은 일부 유해성이 확인되었으며 사용량이 많고 취급 부주의시 근로자에 직접 노출될 수 있어 취급근로자의 건강장해 예방을 위해 노출 감시가 필요한 물질로 판단되었다.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4950-4960
• /
• 2014

본 연구는 잠수함 승조원들의 이직의도 요인을 분석하기 위해 설문 조사를 통한 실증적 연구를 실시하였으며, 분석도구로 이요인 이론을 토대로 한 Kano모델과 Timko 고객만족계수를 이용하였다. 본 연구는 2013년 11월 1일부터 30일까지 잠수함 승조원 408명을 대상으로 설문조사를 실시하였으며 분석결과 다음과 같은 결과를 도출하였다. 잠수함 승조원들은 잠수함의 열악한 근무환경, 수압에 의한 신체적 위험, 밀폐된 공간에서의 불안감 그리고 불확실한 계급 정년 등이 이직을 생각할 때 가장 많은 영향을 미치는 것으로 분석되었다. 이러한 결과를 바탕으로 분석된 요인에 대해 복지적인 측면과 정책적인 측면에서 요인별로 해소방안을 제시하였다.

• 한국정보전자통신기술학회논문지
• /
• 제13권3호
• /
• pp.267-276
• /
• 2020

제조업 근로자는 근무 환경에서 반복 작업에 의한 근골격계 질환의 위험에 쉽게 노출되어 있다. 이는 신체를 반복적으로 이용하는 직업 특성상의 문제에 기인한다. 하지만 현재 감시 및 예방을 위한 모니터링 시스템이 제공되지 않아 매년 위험에 대한 근로자의 노출도가 증가하고 있다. 본 논문에서는 IMU 센서를 사용한 웨어러블 장치 제작을 통해 실제 작업 환경에서의 이러한 문제를 해결하는 방법에 대해 제시한다. 웨어러블 형태의 장치를 착용 후, 근골격계 움직임에 따른 회전 값을 받아와 데이터 분석을 통해 사용자의 움직임을 판단해낸다. 이때, 바이어스 제거와 누적 오차를 제거해 정교한 데이터 취득하여 이를 동적 임곗값 형식으로 분석하여 사용자의 회전 운동 횟수를 측정해내어 위험도를 판단한다. 본 논문에서 제안한 웨어러블 장치를 이용 팔꿈치 근골격계 질환에 대한 회전 횟수를 측정하는 웹 페이지를 통해 본 방법의 효과를 확인할 수 있었다.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.102-107
• /
• 2022

South Korea will soon be a super-aged society, as more than 20.6% of its population will be 65 years and older by 2025. As of 2022, 17.5% of the total population in South Korea is 65 years and older, which exceeds the set threshold for an aged society, where more than 14% of the population is 65 years and older. The proportion of older subway construction workers has increased. Aging workers and their work stress negatively impact their workability. A previous study demonstrated that the stress index measured using the uBioMacpa measurement device (Macpa stress index) had a significant correlation with work stress in South Korea. The device tests vascular health and measures stress levels via Macpa signal analysis. In this study, the pulse waves of subway construction workers were measured using uBioMacpa to identify their stress levels. The stress levels were analyzed by age, years of service, job position, employment type, and work type. Herein, these statistics could not be easily represented by a normal distribution; therefore, the Kruskal-Wallis test, a nonparametric statistical method, was used for the analysis of data. The results showed that age, job position, employment type, and working type affected the Macpa stress index and the stress levels of workers increased with age. In terms of job position, technical engineers were more stressed than other workers because of their poor working environment. In terms of employment type, daily-wage workers were more stressed than other workers. In terms of working type, tunneling, waterproofing, and construction scored the highest Macpa stress indexes without any significant difference, whereas earthworks scored the lowest. Based on the analysis of Macpa stress index, safety and health management plans were proposed to reduce the stress levels of workers. Moreover, a manual for efficient stress management must be developed for subway construction workers.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2118-2123
• /
• 2010

국내의 경우 방사선작업종사자의 개인피폭관리는 선량한도를 초과한 피폭의 유무를 확인하여 사후 조치를 취하는 것에 초점이 맞추어져 있다. 그러나 의료기관 핵의학과의 경우 개봉선원을 사용하므로 작업환경이 방사선에 노출될 가능성이 많고, 방사성의약품 투여 후 수 시간 혹은 수 일 동안은 환자 자체가 방사선원이 되므로 방사선작업종사자나 수시출입자, 환자보호자들의 방사선 피폭 가능성이 매우 높다. 따라서 환자보호자 등 일반출입자의 방사선피폭을 방지하기 위해서는 환경방사선관리가 적절하게 실시되어야 한다. 일본에서는 "방사성동위원소등에 의한 방사선장해의 방지에 관한 법률" 등에 근거하여 방사선작업환경에 대한 환경방사선량을 정기적으로 측정, 보관하도록 하고 있다. 이에 대전시 소재 대학병원 핵의학과에서 일본에서 시행하고 있는 것과 같은 방법으로 핵의학과 내 8개소에 유리선량계를 설치하여 환경방사선을 측정한 결과 8개소 모두 "진단용 방사선 발생장치의 안전관리에 관한 규칙"에 규정된 방사선구역의 외부방사선량인 주당 0.3 mSv에는 훨씬 미치지 못하는 적은 선량이 측정되었다. 그러나 접수대에서는 3개월 누계 선량률이 0.51 mSv로서 접수대 종사자는 일반인 연간 유효선량한도인 1 mSv를 초과할 가능성이 높았으며, 환자 및 보호자 대기실에서도 0.23 mSv(3개월 누계치 0.69mSv)가 측정되어 유리선량계를 설치한 8개소 가운데 가장 높은 선량률을 보였다. 이것은 일반인의 연간 유효선량한도인 1 mSv를 초과하는 값이며, "방사선방호 등에 관한 기준 고시"에 환경상 위해방지를 위해 규정된 연간 유효선량 0.25 mSv를 초과하는 값이다. 따라서 접수대 근무자, 환자보호자 및 제3자 보호를 위해 핵의학과 내 환경방사선량 감소를 위한 적극적인 대책이 필요한 것으로 나타났다.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.248-255
• /
• 2018

Ensuring the quality of molds is one of the major issues in mass production. In general, securing the quality of the molds is achieved by repeating grinding and die spotting after machining the molds based on engineer's decision. However, this heuristic method is affected by the engineer's skill and working environment. Therefore, a lot of time and resources are needed in order to ensure quality. In this study, ensuring the quality of molds using grinding map which is generated using automatic measurement is proposed. An automatic measuring system based on CMM (Coordinate Measuring Machine) is developed for measuring the molds. This system generates the measurement path automatically using the 3D CAD model of products. CAD (ComputerAided-Design), CAM (Computer-Aided-Manufacturing), and CAQ (Computer-Aided-Quality) technology is integrated using DMIS (Dimensional Measuring Interface Standard) format in the automatic measuring system. After measuring the molds, a grinding map is generated using the gap between the CAD model and measured values of mold. The grinding map displays the machining tendency and the required amount of grinding with values on a 3D map. Therefore, the quality of molds can be ensured with exactness and quickness based on the grinding map. This study shows that integrating the planning, measuring, and analyzing based on computer technology can solve the problem of quality assurance of mold using the proposed method, therefore the productivity can be increased.