• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.496-504
• /
• 2005

The thermal and mechanical properties of an electro-slag cast steel of a similar chemical composition with an AISI-6F2 steel are investigated and compared with a forged AISI-6F2 steel. AISI-6F2 is a hot-working tool steel. Electro-slag casting (ESC) is a method of producing ingots in a water-cooled metal mold by the heat generated in an electrically conductive slag when current passes through a consumable electrode. The ESC method provides the possibility of producing material for the high quality hot-working tools and ingots directly into a desirable shape. In the present study, the thermal and mechanical properties of yield strength, tensile strength, hardness, impact toughness, wear resistance, thermal fatigue resistance, and thermal shock resistance for electro-slag cast and forged steel are experimentally measured for both annealed and quenched and tempered heat treatment conditions. It has been found that the electro-slag cast steel has comparable thermal and mechanical properties to the forged steel.

• 한국주조공학회지
• /
• 제22권1호
• /
• pp.17-25
• /
• 2002

Recently, many studies have been carried out to process on the purpose of lightness in a transport parts because of the saving energy, the environmental problem. The cast-forging process can be expected to lower costs without decreasing the mechanical properties. So, the finest microstructure is needed to get for applying the cast-forging process with Al-Si alloy because the microstructure affects to the cast-forging process. For refinement treatment of eutectic Si and Al solid-solution phase, Sr and TiB were added in Al-Si alloys. The finest microstructure could be observed when 0.075 wt.%Sr and 0.1 wt.%TiB were added respectively. In this case, tensile strength and elongation much more increased than as casting. After high temperature deformation simulation test with grain refinement specimens was carried out, about 70N per unit $area(mm^2)$ of specimen was confirmed. After hot forging, tensile strength and elongation were increased. It was considered because casting defect was removed by compressive working.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.286-288
• /
• 2004

The purpose of this study is to evaluate the effects of hammer peening on the redistribution of residual stress at the repair weldment of cast iron using FEA. The FEA results were verified by comparing with experimental results. The maximum residual stress at the repair weldment of cast iron sharply decreases by hammer peening. The effect of hammer peening on the residual stress increases with a decrease of working temperature of hammer peeing.

• 대한치과기공학회지
• /
• 제3권1호
• /
• pp.37-41
• /
• 1981

• 한국주조공학회지
• /
• 제22권1호
• /
• pp.26-34
• /
• 2002

For application of cast-forging process with Al-Si alloys, casting experiments are carried out by adding Sr and TiB to Al-Si alloys for grain refinement treatment. We experimented on the mechanical properties according to microstructural changes, forging ability test and also investigated the mechanical properties after forging. The finest microstructure could be observed respectively when 0.05 wt.%Sr and 0.1 wt.%TiB were added. In this case, tensile strength and elongation increased much more than as casting. After high temperature deformation simulation test with grain refinement specimens was carried out, about 60N per unit $area(mm^2)$ of specimen was confirmed. After hot forging, tensile strength and elongation were increased. It was considered that casting defect was removed by compressive working.

• 한국정밀공학회지
• /
• 제6권3호
• /
• pp.24-31
• /
• 1989

By use of the machining center, step-feed drilling was operated under the variety of conditions as to materials, tools and cutting conditions. Based on this study the following conclusions can be drawn : 1) The cutting force can be diminished by utilizing the step-feed working; specially the most effective was it for the brass among the carbon steel, the brass, and the cast iron. 2) Tool life can be enlarged more than double when three-step-feed working is used. 3) For the constant cutting-depth(30mm), the most optimal number of stepping is 3.

• 대한치과기공학회지
• /
• 제44권1호
• /
• pp.24-30
• /
• 2022

This research introduces the manufacturing process of the metal-framework of one of the maxillary partial dentures, the "obturator", using milling wax-blocks, for patients with palate loss due to oral cancer. It explains the protocol of taking the patient's oral impression, preparation of a working cast, scanning, designing using a computer-aided design program, investing the milling wax-blocks, and completing the obturator. This method does not follow the traditional wax and agar process thereby reducing the errors arising during the manufacturing process and decreasing the time, material, and labor required. Moreover, the retention, stability, and compatibility of the metal framework were observed to be high in both the working cast and oral cavity.

• 치위생과학회지
• /
• 제10권3호
• /
• pp.177-183
• /
• 2010

탄성 고무인상재의 종류인 폴리설파이드(polysulfide), 폴리이써(polyether), 부가중합형 실리콘(addition silicone)에서 점주도(consistency)가 Type III인 인상재를 각각 1종류 선택하여 증류수 $3.3{\mu}l$를 떠뜨려 접촉각을 측정하고, 세 종류의 인상체에 치과용 경석고를 부어 작업모형을 만들고 표면을 관찰하였다. 접촉각 측정은 전자동접촉 각 측정시스템(DM-700, KYOWA, Japan)을 이용하였고 작업모형의 표면관찰은 전계 방사형 주사 전자현미경(JSM-6700F, JEOL Ltd., JAPAN)을 이용하여 다음과 같은 결론을 얻었다. 1) 초기 접촉각의 평균과 표준편차는 부가중합형실리콘, 폴리이써, 폴리설파이드 제품이 각각 $91.3^{\circ}{\pm}20.5$, $90.0^{\circ}{\pm}2.2$, $101.5^{\circ}{\pm}2.3$로 평균값은 유사하게 나타났으나 부가중합형실리콘의 표준편차값에서 큰 차이를 보여줬다. 이는 술자의 술식에 따라 항상 일정한 특성을 보여주지 않는 다는 것이다. 2) 시간이 흐를수록 부가중합형실리콘 제품은 다른 두 종류에 비해 접촉각이 급속히 감소함을 관찰 할 수 있었고, 초기접촉각이 $91.3^{\circ}$이며 25초 후 $29.4^{\circ}$로 급격히 감소했다. 3) 폴리이써 제품은 초기접촉각이 $101.5^{\circ}$에서 25초 후의 접촉각 $90.7^{\circ}$이였고, 폴리설파이드 제품은 초기접촉각이 90.0에서 25초 후의 접촉각 84.2로 변화가 거의 일어나지 않았고 그 각도도 부가중합형실리콘에 비해 컸다. 4) 세 종류의 탄성고무인상재에서 시간이 흐름으로써 관찰된 접촉각은 유의성이 있었다(p<0.001). 5) 작업모형의 표면관찰에서 부가중합형실리콘이 가장 치밀했고, 그 다음 폴리설파이드, 폴리이써 순서였다. 따라서 탄성고무 인상재에 있어서 접착각이 작은 부가중합형 실리콘은 폴리이써나 폴리설파이드 제품에 비해 더 치밀한 작업모형을 얻을 수 있었고 세 종류의 인상재접착각에서 큰 유의성을 보였다. 그러나 부가중형 실리콘은 접촉각의 편차가 커 술자의 주의가 필요한 것으로 나타났고 폴리설파이드 제품과 폴리이써 제품은 20~25초 후 접촉각이 최초 접촉각과 큰 차이를 보이지 않아 소수성 제품으로 인상채득 시 주의가 요망되는 것으로 보여진다. 향후 Vitro 상태에서 인상재에 영향을 미치는 여러가지 요인들에 대한 계속적인 연구의 필요성을 느낀다.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.504-509
• /
• 2017

In order to improve corrosion resistance for cast stainless steel in seawater, the characteristics of corrosion resistance after plasma ion nitriding was investigated. Plasma ion nitriding process was conducted in a mixture of nitrogen of 25% and hydrogen of 75% at substrate temperature ranging from 350 to $500^{\circ}C$ for 10 hours using pulsed-DC glow discharge plasma with working pressure of 250 Pa in vacuum condition. Corrosion tests were carried out for as-received and plasma ion nitrided specimens. The corrosion characteristics were investigated by measurement of weight loss and observation of surface morphology. In anodic polarization experiment, relatively less damage depth and weight loss were presented at a nitrided temperature of $400^{\circ}C$, attributing to the formation of S-phase.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1161-1168
• /
• 1991

The purpose of this project is to develop an automatic cutting robot system of cast steel, which raise productivity with improvement of working circumstances, overcomming labor deficiency, reduction of process and cycle time by applying cutting automation at inferior working circumstances and condition of a foundry. This system consisted of a 5 DOF tool system, an improved conveyer system and the HR-8608 ROBOT, makes it possible to get the reduction of 12 manpowers and 30% productivity up.