• 한국표면공학회지
• /
• 제56권1호
• /
• pp.62-68
• /
• 2023

Silicon (Si) is considered as a promising substitute for the conventional graphite due to its high theoretical specific capacity (3579 mAh/g, Li₁₅Si₄) and proper working voltage (~0.3V vs Li⁺/Li). However, the large volume change of Si during (de)lithiation brings about severe degradation of battery performances, rendering it difficult to be applied in the practical battery directly. As a one feasible candidate of industrial Si anode, silicon monoxide (SiO_x) demonstrates great electrochemical stability with its specialized strategy, downsized Si nanocrystallites surrounded by Li⁺ inactive buffer phase (Li₂O and Li₄SiO₄). Nevertheless, SiO_x inherently has the initial irreversible capacity and poor electrical conductivity. To overcome those issues, conformal carbon coating has been performed on SiO_x utilizing ethylbenzene as the carbon precursor of chemical vapor deposition (CVD). Through various characterizations, it is confirmed that the carbon is homogeneously coated on the surface of SiO_x. Accordingly, the carbon-coated SiOx from CVD using ethylbenzene demonstrates 73% of the first cycle efficiency and great cycle life (88.1% capacity retention at 50th cycle). This work provides a promising synthetic route of the uniform and scalable carbon coating on Si anode for high-energy density.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.137-149
• /
• 2023

In this study, to explore the working performance of the CFST split spherical node wind power tower, two groups of CFST split spherical joint plane towers with different web wall thicknesses and a set of space systems were analyzed. The tower was subjected to a low-cycle repeated load test, and the hysteresis and skeleton curves were analyzed. ABAQUS finite element simulation was used for verification and comparison, and on this basis parameter expansion analysis was carried out. The results show that the failure mode of the wind power tower was divided into weld tear damage between belly bar, high strength bolt thread damage and belly rod flexion damage. In addition, increasing the wall thickness of the web member could render the hysteresis curve fuller. Finally, the bearing capacity of the separated spherical node wind power tower was high, but its plastic deformation ability was poor. The ultimate bearing capacity and ductility coefficient of the simulated specimens are positively correlated with web diameter ratio and web column stiffness ratio. When the diameter ratio of the web member was greater than 0.13, or the stiffness ratio γ of the web member to the column was greater than 0.022, the increase of the ultimate bearing capacity and ductility coefficient decreased significantly. In order to maximize the overall mechanical performance of the tower and improve its economy, it was suggested that the diameter ratio of the ventral rod be 0.11-0.13, while the stiffness ratio γ should be 0.02-0.022.

• 핵의학기술
• /
• 제14권1호
• /
• pp.61-66
• /
• 2010

VDT는 Video Display Terminals의 약어로 시각 표시 단말기를 뜻한다. 최근 핵의학과에 VDT가 대량 보급되면서 점차적으로 사용자들이 늘어남과 동시에 사용 기간이 급증함에 따라 VDT 증후군에 관심이 높아지고 있다. 본 연구는 서울대학교병원 핵의학과를 대상으로 VDT 유해 요인 평가 도구를 적용하여 그 실태를 조사하고 문제점을 발견하여 향후 개선에 관한 방안을 도출함으로써 VDT 증후군에 관한 의식을 정립하고 궁극적으로 예방하는 데 목적이 있다. 서울대학교병원 핵의학과를 본원 핵의학과, 소아 핵의학과, PET 센터의 3개 파트로 분류하고, 2009년 4월 한 달 동안 현재 근무 중인 방사선사 23명을 대상으로 근무 부서를 직접 방문하여 유해 요인을 평가하였다. 평가에 사용한 도구는 원진 노동환경건강연구소의 "VDT작업에 관한 체크리스트"를 적용하였고 VDT 작업 조건, 업무 책상의 조건, 의자의 조건, 키보드의 조건, 모니터의 조건, 작업 자세, 보건 관리 특성, 기타 작업 환경의 8개 부문, 총 55개 항목을 통하여 현장 조사 및 평가하였으며 이에 대한 분석 결과는 한림대학교 성심병원 산업의학과에서 검증하였다. 서울대학교병원 핵의학과의 VDT 작업 조건은 비교적 양호한 수준이었다. 책상의 경우 최근 도입한 경우에는 인체공학적 설계로 사용자에게 적합하였으나 기존 책상의 15%는 기준치에 미달하였다. 의자의 경우는 기준에 적합하였지만 노후화로 인하여 적정 기능을 상실한 것이 5%였다. 키보드는 98%가 기준에 적합하였고 모니터는 화면의 각도 조절은 모두 가능하였지만 위치 조절이 불가능한 것이 38%로 조사되었다. 작업 자세의 경우 부적절한 자세로 장시간 노출되는 경우가 10%였으며 일부 항목에서 기준에 적합하지 않은 것으로 조사되었다. 보건 관리 측면에서도 개선의 여지가 있는 것으로 나타났다. 또한 조명과 온도, 소음, 환기 등 기타 작업 환경은 일부 항목에서 문제점이 발견되었지만 권고치를 충족하였다. 핵의학과 업무는 과거에 비하여 육체적인 업무는 줄었으나, 장시간 정적인 자세로 고도의 정밀도와 집중력을 요구하게 되었으며 이는 필연적으로 VDT 증후군을 유발하는 계기가 되었다. VDT 증후군은 앞으로도 지속적으로 발생할 가능성이 높으며 개선에 대한 경제적 비용이 상당하다는 점과 다양한 발병 요인을 내재하며 본인도 모르는 사이에 발생한다는 점에서 보다 구체적이며 효율적인 관리 체계가 필요할 것으로 판단된다. 핵의학과의 VDT 증후군은 인체공학적 사무 환경의 개선, 업무 절차(procedure)의 개선과 업무의 효율화, 직원간의 협동작업(teamwork) 그리고 규칙적인 운동, 꾸준한 스트레칭 체조와 같은 사용자 스스로의 노력, 지속적인 관심과 작은 노력으로 충분히 개선될 수 있으며 적극적으로 예방할 수 있을 것으로 사료된다. 이것은 쾌적한 업무 환경속에서 사용자의 육체적, 정신적 상태를 최상으로 이끌고 업무 효율성의 증대와 함께 내부 고객 만족도 상승으로 이어질수 있을 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.259-266
• /
• 1999

In case that pile cap is in direct contact with underlying soil, the bearing mechanism for pile groups, including direct bearing effect of cap and its induced influence on pile-soil-cap interaction, should be properly considered. In this paper, the effects of pile caps on behaviors of pile groups in sandy soils were investigated by model tests, which consist of tests on 3 by 3 pile groups with/without contact on subsoil, single pile with/without contact and cap as a shallow foundation. Also, the influences of pile spacing in group piles on contact effects were investigated. The test results showed that the load carrying capacity of pile cap was large enough not to be ignored. However, the interaction effects due to contact between cap and subsoils were not revealed obviously in working load range. And in the design of pile groups, the bearing effect of pile cap when contacted with subsoils, can be reflected by simply summing up load settlement behaviors of each cap and group piles without contact.

• Tribology and Lubricants
• /
• 제19권3호
• /
• pp.139-145
• /
• 2003

In this paper, static characteristics of a cryogenic hydrostatic journal bearing which has 2-rows staggered recesses are numerically analyzed. The regime of operation of this bearing is fully turbulent with large fluid inertia effects. The turbulent lubrication equation is solved under the assumption that turbulence parameters are decided by the Reynolds numbers. Pressure drop caused by inertia effect at the recess edge is considered in this analysis. Also density and viscosity of working fluid are considered as function of only pressure. Numerical results for a cryogenic Hydrostatic journal bearing show pressure distribution, load capacity, flow rate, and recess pressure. The effects of turbulent flow, pressure drop and variable liquid properties are discussed.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.56-61
• /
• 2011

Numerical study is conducted to design the high temperature heat exchanger of Stirling engine by using the commercial CFD solver, FLUENT. The Fin-tube type of heat exchanger is designed as a reference model by considering the type of engine which is ${\beta}$-configuration. To find the optimal design of heat exchanger in heat transfer capacity numerical calculation is conducted by changing the shape, the number, and material of reference model in three-dimensional combustion field. Adjusted one-way constant velocity of working fluid that is helium is considered as the representative velocity of oscillating flow. The optimal design of heat exchanger considering the heat transfer capability is suggested by using the calculation results.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1146-1151
• /
• 2011

Acoustic load from rocket propulsion system is main source of random vibration working on the payload. To protect payload from this acoustic load, additional APS(acoustic protection system) is generally applied. Noise reduction capacity of APS can be verified through acoustic test and vibro-acoustic coupled analysis. This paper compared the results of acoustic test and vibro-acoustic coupled analysis about KSLV-I payload fairing with APS.

• 성인간호학회지
• /
• 제19권3호
• /
• pp.495-507
• /
• 2007

Purpose: This critical ethnography was performed to explore the experiences of nurses who are working with patients in an industrial disaster hospital. During the research process, I focused on the experiences of conflict in caring patients. Methods: Data for the study came from 13 informants with their corresponding patients through interview and observation from March 2002 to February 2004. The data was examined line by line; then compared and contrasted based on a critical discourse analysis. Results: Nurses' conflicts came from discrepancies of the world views from that of the patients. Such conflicts arose because of various issues as follows: Worker as an individual vs patients, nurse as young women vs the medical profession, hospital as an extended home vs health care setting, and hospitalization as a means to enhance work capacity vs a means of treatment. Conclusion: We need more study on the development of adaptive strategy for the nurses to overcome conflicts during their nursing career. Developing a nurses' and patient role intervention program is needed.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.67-70
• /
• 2002

The Stirling cryocooler with helium refrigerant has been widely used for the cooling of the infrared detector, and the alternatives of the helium in the Stirling cryocooler are nitrogen and hydrogen gas. In this study, the performance experiment of the small FPFD(Free Piston and Free Piston) type Stirling cooler and the moving coil type, dual acting linear compressor was performed when the nitrogen and helium is used for the working fluid The results show that the nitrogen refrigerant has small cooling capacity compared with the helium, but the performance characteristics of the linear compressor does not greatly changed.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1023-1030
• /
• 2002

This paper is to research the heat transfer characteristic performance of the copper-water heat pipe with the screen wicks. Recently, the semiconductor capacity of an electronic unit has been larger, on the contrary, its size has been much smaller. As a result, a high-performance cooling system is needed. Experimental variables are inclination angles, temperatures of cooling water and the mesh number of screen wicks. The distilled water was used for the working fluid. At the inclination angle $6^{\circ}$ in top heat mode, the two layers of the 100-mesh screen wick showed the best heat transfer performance. The thermal resistance of the two layers with the 100-mesh screen was 0.7~$0.8^{\circ}C$/W.