• Korean Journal of Social Welfare
• /
• v.65 no.1
• /
• pp.175-199
• /
• 2013

This study was to investigate working experience of poor female-headed families in social enterprise focusing on empowerment process. For this study, nine female-headed women were interviewed and the collected qualitative data were analyzed through phenomenological research method. Main results of this study provided eight main construct factors, such as the intersection of hope and unhappy, economic independence through being alone, finding myself strong and worthy, consciousness of horizontal bondage, trouble situation, professionalism and pride, capacity to problem solving and self-importance of contribution to society. Based on the results of this study, working experience of poor female-headed families in social enterprise was strengthened from personal level and relational level to social level. Therefore, various policies and practical programs should be prepared to improve empowerment of female-headed families in poverty working in social enterprise.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.320-330
• /
• 2018

Purpose: The aim of this study was to investigate the harvesting performance of a prototype small combine for buckwheat and adlay. Methods: The prototype small combine was designed and constructed. Its ratio of grain loss, ratio of output components in the grain outlet, and field capacity for harvesting buckwheat and adlay were analyzed through field tests. Results: The prototype small combine required a working width of about 0.6 to 0.7 m to harvest buckwheat. The maximum travel speed was about 0.36 m/. The total ratio of grain loss was about 21.6%, which consisted of 8.8% at the header and 12.8% at the dust outlet. The grain and the material other than grain (MOG) ratios at the grain outlet were 94.1% and 5.9% respectively. In the case of adlay harvest, the maximum working width was about 1.2 m, that is, two rows. The range of maximum travel speed was about 0.45 to 0.46 m/s. When adlay was harvested in one row, the total ratio of grain loss ranged from 36.3 to 42.8% according to the cutting height. The cutting height of 30 cm resulted in a higher total ratio of grain loss than 60 cm and 90 cm. When the cutting height was 60 cm, there was no significant change in the total ratio of grain loss according to the number of working rows and the stage of the primary transmission shift. The total ratio of grain loss ranged from 35.2 to 37.7%. The grain and the MOG ratios at the grain outlet ranged from 93.1 to 95.8% and from 4.2 to 6.9%, respectively. No significant difference was observed in relation to cutting height, number of working rows, and the stage of the primary transmission shift. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops showed good potential for the efficient harvesting of buckwheat and adlay. However, to improve the harvesting performance, there seems to be a need to develop new crop varieties suitable for machine-based harvesting and improve the transmissions, reels, separation/cleaning systems.

• Computers and Concrete
• /
• v.30 no.3
• /
• pp.175-183
• /
• 2022

To study the working mechanism and size effect of an innovative dovetail UHPC joint originated from the 5th Nanjing Yangtze River Bridge, a large-scale testing subject to negative bending moment was conducted and compared with the previous scaled specimens. The static responses, i.e., the crack pattern, failure mode, ductility and stiffness degradation were analyzed. It was found that the scaled specimens presented similar working stages and working mechanism with the large-scale ones. However, the post-cracking ductility and relative stiffness degradation all decrease with the enlarged length/scale, apart from the relative stiffness after flexural cracking. The slab stiffness at the flexural cracking stage is 90% of the initial stiffness while only 24% of the initial stiffness reserved in the ultimate stage. Finite element model (FEM) was established and compared with the experiments to verify its effectiveness in exploring the working mechanism of the innovative joint. Based on this effective method, a series of FEMs were established to further study the influence of material strength, pre-stressing level and ratio of reinforcement on its deflection-load relationship. It is found that the ratio of reinforcement can significantly improve its load-carrying capacity among the three major-influenced factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.449-458
• /
• 2016

The study verified the work capacity (job performance, perception, knowledge) and satisfaction on managing the inventory of operating room nurses working in a more than 700-bed hospital. The purpose of this study was to provide basic data of education for work capacity and satisfaction and quality insurance by analyzing the scores between the three different operating rooms and the correlation between the work capacity and satisfaction by investigating the related factors. This study presented a structured and self-administered questionnaire to 181 nurses who had been working in the operating room more than six months. The mean and standard deviation of the job performance, perception, knowledge, and satisfaction were 4.2(${\pm}0.56$), 3.4(${\pm}0.76$), 3.5(${\pm}0.40$), and 3.4(${\pm}0.55$), respectively. The work capacity and satisfaction of each group did not show a statistically significant difference. The correlations between the job performance and knowledge, knowledge and perception, perception and satisfaction were positive (r=.627, p<0.01), (r=.663, p<0.01) and (r=.485, p<0.01), respectively. Among the factors related to the general characteristics of operating room nurses, only age significantly affected their job performance. This study provides basic data on the maintenance and improvement of their competence and satisfaction by being served as a resource for sustainable human resources management and training, and efficient management of the communication channel between hospitals.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.8
• /
• pp.17-30
• /
• 2019

Based on pile load test results for various pile types that were constructed in-situ and pile design data of prebored PHC piles, the ratio of skin friction to total capacity (SRF) was analyzed. A SRF distribution range from the pile load test results for pilot test prebored PHC piles was 42~99% regardless of relative penetration lengths, soil types, and pile load test types. However, a SRF distribution range from the pile design data for prebored PHC piles was 20~53% regardless of relative penetration lengths and pile diameters. Also, a SRF distribution range from the restrike dynamic pile load test results for pretest working prebored PHC piles was a scattered range of 4~83% regardless of pile diameters, relative penetration lengths and soil types. The scattered SRF of pretest working piles was caused to the quality control issue on the filling of cement milk around piles and this quality control issue should be improved. The average SRF calculated by the current design method was estimated to be 2.2 times lower than the average SRF of the pilot test piles. It is because skin friction resistance is calculated at a very low level. Therefore, a new design method for skin friction will be proposed based on this study.

• Journal of Energy Engineering
• /
• v.10 no.4
• /
• pp.318-326
• /
• 2001

To enhance thermal efficiency of thermal facility through recovery of low and medium temperature waste heat, 1 MW organic Rankine cycle system was designed and developed. The exhaust gases of 175$^{\circ}C$ at two 100 MW power plants in pohang steel works were selected as the representative of low and medium temperature waste heat in industrial process for the heat source of the organic Rankine cycle system. HCFC-123, a kind of harmless refrigerant, was chosen as the working fluid for Rankine cycle. The organic Rankine cycle system with selected exhaust gases and working fluid was designed and constructed. From the operation, it was confirmed that the organic Rankine cycle system is available for low and medium temperature waste heat recovery in industrial process. The optimum operating manuals, such as heat-up of hot water, turbine start-up, and the process of electric power generation, were derived. However, electric power generated was not 1 MW as designed but only 670 kW. It is due to deficiency of pump capacity for supply of HCFC-123. So it is necessary to increase the pump capacity or to decrease the pressure loss in pipe for more improved HCFC-123 supply.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.133-138
• /
• 2009

The continued rise in the number of automobiles on the roads is prompting air pollution to emerge as a serious problem due to the harmful exhaust gas emissions throughout the world. Specifically, based on the exhaust gas regulation in North America represented by PZEV, the regulation on evaporative emission, which originates from the intake manifold system when the engine is stopped, is substantially being intensified. And the technology that can meet and satisfy these regulations has been needed. This study aimed to analyze and evaluate the butane working capacity (BWC) of HC adsorption filter according to the shape of it, which was developed to reduce evaporative emission, and the effect of HC adsorption filter on the engine performance. As a results, HC adsorption filter of the plate type, which was improved compared to that of the corrugated type and also became thinner, indicates higher absorption performance compared to the corrugated one. The absorption performance of the honeycomb type, derived from improving the shape of plate type, is 33.5% higher than that of the corrugated type. However, there was no significant difference in engine performance in all shapes.

• Journal of Fisheries and Marine Sciences Education
• /
• v.21 no.2
• /
• pp.213-229
• /
• 2009

The purpose of this study is not only to provide students in the fishery high schools with source materials and opportunity, but also to contribute to a comprehensive development in educational program of the fishery high schools. It investigated various factors of aquarium related 6 new occupations : job contents, educational-level for job performance, training period, worker's capacity, the degree of physical activity, working place, and working environment. First, the work intensity is a normal work. The physical activities such as crawling, bending, accurately seeing a nearby thing and using hands are frequently used. The work is mainly conducted inside a room. The condition for a work environment is very moist and humid. Second, the work intensity is a light work. The physical activities such as using hands, speaking and accurately seeing a nearby thing are frequently used. The work is mainly conducted inside and outside a room. The work environment factor did not have any effect on the work. Third, the work is mainly conducted inside and outside a room. The risk in the condition for a work environment is found out as miscellaneous. Fourth, the physical activities such as bending, touching, and accurately seeing a nearby thing are frequently used. The work is mainly conducted inside a room. The work environment factor did not have any effect on the work. Fifth, the work is mainly conducted inside a room. The condition for a work environment is very moist and humid. Sixth, the work is mainly conducted inside a room. The work environment factor did not have any effect on the work.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.527-539
• /
• 2018

Cognitive decline in aging is known to yield detrimental effects in syntactic processing and working memory capacity is the most crucial cognitive function in understanding older adults' sentence processing skills. This study examined how young and older adults utilize contextual information while resolving NP-attached Ps vis word-by-word self-paced reading paradigm. In addition, the study asked which cognitive functions play roles on the use of a NP-supporting context during processing of NP-attached PP. When NP-attached PP was presented in a supporting context, both age groups performed faster than in the null context condition. Among different cognitive functions, alternating attention skills were correlated with the ability utilizing context during syntactic ambiguity resolution and working memory capacity was not found to be crucial for this study. In conclusion, this study suggests that aging does not always affect older adults' syntactic processing negatively and relevant cognitive function may vary depending on the type of syntactic structure.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.14 no.4
• /
• pp.20-26
• /
• 2018

In this study, the performance characteristics of a welded plate heat exchanger was investigated experimentally. Performance tests were carried out according to the flow rate and inlet temperature of working fluid. As a result, the heat transfer capacity increased by 335.5 kW with an increasing the flow rate and temperature difference between hot and cold side. However, the overall heat transfer coefficient was increased with the increase of flow rate, and it was not effected significantly from inlet temperature difference between hot and cold working fluid. The pressure drop was increased by 55.78 kPa with an increasing the frow rate when the flow rate ratio between hot and cold side 1:1. However, the tendency of pressure drop was difference when flow rate ratio wasn't 1:1. In case that the flow rate ratio between hot and cold side was not 1:1, the pressure drop at the low flow rate side was higher than that when the flow rate ratio was 1:1, while pressure drop of the other side was decreased compared to that when the flow rate ratio was 1:1.