Browse > Article
http://dx.doi.org/10.12989/cac.2022.30.3.175

Large-scale testing and numerical study on an innovative dovetail UHPC joint subjected to negative moment  

Zhang, Qifeng (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
Feng, Yan (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
Cheng, Zhao (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
Jiao, Yang (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
Cheng, Hang (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
Wang, Jingquan (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
Qi, Jianan (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
Publication Information
Computers and Concrete / v.30, no.3, 2022 , pp. 175-183 More about this Journal
Abstract
To study the working mechanism and size effect of an innovative dovetail UHPC joint originated from the 5th Nanjing Yangtze River Bridge, a large-scale testing subject to negative bending moment was conducted and compared with the previous scaled specimens. The static responses, i.e., the crack pattern, failure mode, ductility and stiffness degradation were analyzed. It was found that the scaled specimens presented similar working stages and working mechanism with the large-scale ones. However, the post-cracking ductility and relative stiffness degradation all decrease with the enlarged length/scale, apart from the relative stiffness after flexural cracking. The slab stiffness at the flexural cracking stage is 90% of the initial stiffness while only 24% of the initial stiffness reserved in the ultimate stage. Finite element model (FEM) was established and compared with the experiments to verify its effectiveness in exploring the working mechanism of the innovative joint. Based on this effective method, a series of FEMs were established to further study the influence of material strength, pre-stressing level and ratio of reinforcement on its deflection-load relationship. It is found that the ratio of reinforcement can significantly improve its load-carrying capacity among the three major-influenced factors.
Keywords
joint; large-scale testing; negative bending moment; numerical simulation; ultra-high-performance concrete (UHPC);
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Lubliner, J., Oliver, J., Oller, S. and OAte, E. (1989), "A plastic-damage model for concrete", Int. J. Solid. Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4.   DOI
2 Uchida, Y., Tanaka, Y., Katagiri, M. and Niwa, J. (2005), "Outlines of jsce "recommendations for design and construction of ultra high strength fiber reinforced concrete structures (draft)", Proceedings of the International Workshop on High Performance Fiber Reinforced Cementitious Composites in Structural Applications.
3 Verger-Leboeuf, S., Charron, J.P. and Massicotte, B. (2017), "Design and behavior of UHPFRC field-cast transverse connections between precast bridge deck elements", J. Bridge Eng., 22(7), 04017031. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001064.   DOI
4 Mosaberpanah, M.A. and Eren, O. (2017), "Effect of quartz powder, quartz sand and water curing regimes on mechanical properties of UHPC using response surface modeling", Adv. Concrete Constr., 5(5), 481-492. https://doi.org/10.12989/acc.2017.5.5.481.   DOI
5 Qi, J., Bao, Y., Wang, J., Li, L. and Li, W. (2019), "Flexural behavior of an innovative dovetail UHPC joint in composite bridges under negative bending moment", Eng. Struct., 200, 109716. https://doi.org/10.1016/j.engstruct.2019.109716.   DOI
6 Qi, J., Cheng, Z., Wang, J., Zhu, Y. and Li, W. (2020a), "Full-scale testing on the flexural behavior of an innovative dovetail UHPC joint of composite bridges", Struct. Eng. Mech., 75(1), 49-57. https://doi.org/10.12989/sem.2020.75.1.049.   DOI
7 Qi, J., Ma, Z.J. and Wang, J. (2017), "Shear strength of UHPFRC beams: mesoscale fiber-matrix discrete model", J. Struct. Eng., 143(4), 04016209. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001701.   DOI
8 Qi, J., Wang, J., Zhang, Z., Li, W. and Hu, Y. (2020b), "Flexural behavior of an innovative dovetail UHPC joint using steel wire mesh interface treatment in composite bridges", Adv. Struct. Eng., 23(6), 1142-1153. https://doi.org/10.1016/j.engstruct.2019.109716.   DOI
9 Sharma, R. and Bansal, P.P. (2019), "Efficacy of supplementary cementitious material and hybrid fiber to develop the ultra high performance hybrid fiber reinforced concrete", Adv. Concrete Constr., 8(1), 21-31. https://doi.org/10.12989/acc.2019.8.1.021.   DOI
10 Su, L., Wang, S., Gao, Y., Liu, J. and Shao, X. (2020), "In situ experimental study on the behavior of UHPC composite orthotropic steel bridge deck", Mater., 13(1), 253. https://doi.org/10.3390/ma13010253.   DOI
11 El-Tawil, S., Alkaysi, M., Naaman, A.E., Hansen, W. and Liu, Z. (2016), "Development, characterization and applications of a non-proprietary ultra high performance concrete for highway bridges", SPR-1637, Dept. of Civil and Environmental Engineering, Univ. of Michigan, Ann Arbor, MI.
12 Grace, N., Ushijima, K., Baah, P. and Bebawy, M. (2013), "Flexural behavior of a carbon fiber-reinforced polymer prestressed decked bulb T-beam bridge system", J. Compos. Constr., 17(4), 497-506. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000345.   DOI
13 Graybeal, B.A. (2010), "Behavior of field-cast ultra-high performance concrete bridge deck connections under cyclic and static structural loading", Rep. No. FHWA-HRT-11-023, Federal Highway Administration, McLean, VA, USA.
14 Haber, Z.B. and Graybeal, B.A. (2018), "Lap-spliced rebar connections with UHPC closures", J. Bridge Eng., 23(6), 04018028. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001239.   DOI
15 Jankowiak, T. and Lodygowski, T. (2010), "Quasi-static failure criteria for concrete", Arch. Civil Eng., 56(2), 123-154. https://doi.org/10.2478/v.10169-010-0007-8.   DOI
16 Lee, J.K. and Lee, S.H. (2015), "Flexural behavior of ultra-high-performance fiber-reinforced concrete moment connection for precast concrete decks", ACI Struct. J., 112(4), 451-462. https://doi.org/10.14359/51687657.   DOI
17 Connor, R.J. and Fisher. J.W. (2006), "Consistent approach to calculating stresses for fatigue design of welded rib-to-web connections in steel orthotropic bridge decks", J. Bridge Eng., 11(5), 517-525. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:5(517).   DOI
18 Meng, W., Khayat, K.H. (2016), "Mechanical properties of ultra-high-performance concrete enhanced with graphite nanoplatelets and carbon nanofibers", Compos. Part B-Eng., 107, 113-122. https://doi.org/10.1016/j.compositesb.2016.09.069.   DOI
19 Arafa, A., Farghaly, A.S., Ahmed, E.A. and Benmokrane B. (2016), "Laboratory testing of GFRP-RC panels with UHPFRC joints of the Nipigon River cable-stayed bridge in Northwest Ontario, Canada", J. Bridge Eng., 21(11), 05016006. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000943.   DOI
20 Bae, H.U. (2008), "Design of reinforcement-free bridge decks with wide flange prestressed precast girders", Doctoral Dissertation, The University of Wisconsin, Madison.
21 De la Varga, I., Haber, Z.B. and Graybeal, B.A. (2018), "Enhancing shrinkage properties and bond performance of prefabricated bridge deck connection grouts: Material and component testing", J. Mater. Civil Eng., 30(4), 04018053. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002235.   DOI