Production of weakly agglomerated nanopowders with the characteristic size of about 10 nm and a narrow particle size distribution is still a topical problem especially if the matter is an acceptable output (>50 g/hour), a high purity of the final product, and a low (energy consumption. The available experience and literature data show that the most promising approach to production of such powders is the evaporation-condensation method, which has a set of means for heating of the target. From this viewpoint the use of pulsed electron accelerators for production of nanopowders is preferable since they allow a relatively simple adjustment of the energy, the pulse length, and the pulse repetition rate. The use of a pulsed electron accelerator provides the following opportunities: a high-purity product; only the target and the working gas will interact and their purity can be controlled; evaporation products will be removed from the irradiation zone between pulses; as a result, the electron energy will be used more efficiently; adjustment of the particle size distribution and the characteristic size of particles by changing the pulse energy and the irradiated area. Considering the obtained results, we developed a design and made an installation for production of nanopowders, which is based on a hollow-cathode pulsed gas-filled diode. The use of a hollow-cathode gas-filled diode allows producing and utilizing an electron beam in a single chamber. The emission modulation in the hollow cathode will allow forming an electron beam 5 to 100 ms long. This will ensure an exact selection of the beam energy. By now we have completed the design work, manufactured units, equipped the installation, and began putting the installation into operation. A small amount of nanopowders has been produced.
The development of standards and guidelines of rehabilitation nursing has been the major concerns for providing better nursing to the rehabilitation clients. As the patients with stroke and spinal cord injuries are the most prevalent physical disabilities in Korea, this study focussed on the nursing diagnoses of these two groups of patients. In order to identify the nursing diagnoses frequently used In their practice for the patients with stroke and spinal cord injuries, a survey was done with the questionnaire form developed by the research team. The surveyee were the staff nurses working at rehabilitation wards more than 2 years from 8 general hospitals in Korea, They identified and set the priorities of 13 nursing diagnoses from 79 stroke patients and 10 nursing diagnoses from 35 patients with spinal cord injuries during the periods from March 1 to June 2, 1999. The identified nursing diagnoses for the stroke patients are impaired physical immobility, sensory-perceptual alteration, activity intolerance, self-care deficit, altered defecation, altered urination, risk for injury, unilateral neglect, impaired skin integrity, altered thought processes, pain, altered health maintenance, dysreflexia. The identified nursing diagnoses for spinal cord injuries are altered urination, altered defecation, impaired skin integrity, pain, risk for injury, reflex incontinence, impaired physical immobility, self-care deficit, activity intolerance, knowledge deficit.
The integrated environmental permit system is currently in operation online. It carries out various functions of postmanagement such as the submission of annual reports containing operations management data onto integrated management workplaces, the operation and management of emission facilities and prevention facilities, and the disclosure of information on the integrated permission. On the other hand, the integrated environmental permit system needs to perform various roles in order to stably manage and smoothly perform the permitting work. It is necessary to utilize this system to establish policies by using diverse operations management data onto integrated management workplaces collected in the integrated environmental permit system. This system can also play a role in improving the post-management system and user convenience after the permission review and approval processes. The integrated environmental permit system can be effectively used to set up the BAT-AEL because it collects all of the cross-media data and identifies the overall status of the workplace. In order to establish a post management system after the approval, it is necessary to provide performance management and performance evaluation functions as conditions of the permit after approval. In addition, a variety of support functions should be provided to enable the permission authority and the environmental expert examination agency to facilitate the review of permits. It will be necessary to provide an evaluation system and a proactive diagnostic function to determine whether permission conditions and permit emission standards will change in the future. Also, it is important to adopt an information exchange platform that can be used to collect the status data onto the workplaces; the platform can also be used as an information exchange site for technical working groups (TWG), and for collecting field experts' opinions.
PURPOSE: The aim of this study was to measure changes in spine inclination and thoracolumbar structure and morphology according to upper-extremity movements with and without resistance in order to evaluate the spine stability in workers. METHODS: Forty-eight middle-aged male workers (mean age, 40.48 ± 6.27 years) participated in this study. Using the spine analysis system, changes in the inclination of the spine and structure as well as shape of the thoracolumbar spine were measured. For posture measurement, the postures of standing, lifting the right and left arms (shoulder joint 90° flexion), and lifting with both arms were measured in random order. In addition, variables were measured using a resistance of 3 kg for each posture. The statistical significance level was set at α = .05 for all variables. RESULTS: There were statistically significant differences between the front and back inclinations of the spine, kyphotic curve of the thoracic spine, lordotic curve of the lumbar spine, rotation changes in the thoracolumbar spine, and rotation changes in the T4 vertebra (p < .05). However, there was no significant difference in the left and right tilts of the spine. In the post-hoc analysis, rotation changes in the T4 vertebra showed a significant difference in posture when resistance was applied to the left and right sides CONCLUSION: Causes of musculoskeletal diseases include excessive thoracic spine rotation, torsion, and hyperlordosis of the lumbar spine. Therefore, it is necessary to improve the working environment in order to ensure a healthy posture and prevent musculoskeletal diseases that can reduce the ability to carry various and/or excessive loads.
Objectives: The present study was intended to assess the mental health of nurses working for university hospitals and to establish which factors determine their mental health. Methods: Self-administered questionnaires were given to 1,486 nurses employed in six participating hospitals located in Daejeon City and Chungnam Province between July 1 st and August 31st, 2006. The questionnaire items included sociodemographic, job-related, and psychosocial factors, with job stress factors (JCQ) as independent variables and indices of mental health status (PWI, SDS and MFS) as dependent variables. For statistical analysis, the Chi-square test was used for categorical variables, with hierarchical multiple regression used for determining the factors effecting mental health. The influence of psychosocial and job-related factors on mental health status was assessed by covariance structure analysis. The statistical significance was set at p<0.05. Results: The factors influencing mental health status among subject nurses included sociodemographic characteristics such as age, number of hours of sleep, number of hours of leisure, and subjective health status; job-related characteristics such as status, job satisfaction, job suitability, stresses such as demands of the job, autonomy, and coworker support; and psychosocial factors such as self-esteem, locus of control and type A behavior patterns. Psychosocial factors had the greatest impact on mental health. Covariance structure analysis determined that psychosocial factors affected job stress levels and mental health status, and that the lower job stress levels were associated with better mental health. Conclusions: Based on the study results, improvement of mental health status among nurses requires the development and application of programs to manage job stress factors and/or psychosocial factors as well as sociodemographic and job-related characteristics.
Objectives: This study was undertaken in order to examine how musculoskeletal disorder(MSD) symptoms were affected by particular factors and then to explore control strategies to prevent MSDs in general hospital nurses. Materials: This, as part of a large study, was conducted using a set of information on literature review, questionnaire survey and focus group interview. It obtained prevalence and factors of MSD symptoms and examined how MSD symptoms were distributed and affected by the factors in nurses working at 15 general hospitals across Korea. The factors were personal factors, work organization, nursing tasks, physical factors and psychosocial factors. Results: A total of 501 nurses were determined as subjects. The highest MSD symptom prevalence was 61% for the shoulder, among body parts, followed by leg/feet(55%), low back(51%), neck(42%), wrist(38%), and elbow(21%). Prevalence for the whole body was 80%. Odds ratios ranged from 0.4 to 22.4 in logistic regression analyses. The symptoms were significantly attributed to factor variables such as body mass index, current health status, daily work time, nursing task, pooled-physical factors, ergonomic factors, work load, interpersonal conflict, and job insecurity. Conclusions: Two or more factor variables were significant, depending on body part, for MSD systems in the general hospital nurses. It was noticeable that physical factors, such as pooled-physical factors, ergonomic factors or work load, were selectively significant for MSD symptoms in all body parts, indicating that such information should be used for prevention of MSDs in the hospital sector.
스펀지 형태의 담체가 첨가된 침지형 막결합 연속회분식 생물반응기에서 담체가 제거효율과 여과성능에 미치는 영향을 조사하였다. 담체는 반응기 부피 기준으로 각각 5%, 10% 및 20% 첨가하였고, 담체를 첨가하지 않은 반응기를 대조군으로 하였다. COD, T-N 및 T-P에 대한 제거효율은 담체 첨가 유무에 관계없이 큰 차이가 없었다. 그러나 담체를 첨가한 경우, 첨가하지 않은 경우에 비해 조업시간에 따른 막간차압(TMP)은 매우 서서히 증가하였다. 이러한 결과는 폭기에 의해 상승하는 담체가 막 표면과 충돌하게 되고, 이때 막 표면에 형성된 케이크 층을 제거시키기 때문이다. 결론적으로 담체가 첨가된 막결합형 연속회분식 생물반응기는 담체가 없는 반응기에 비해 여과성능이 크게 개선되어, 폐수처리에 효과적으로 활용될 수 있을 것이다.
연구로 1,2호기 해체 사업이 본격적으로 착수하게 됨에 따라 2001년 8월부터 2002년 12월까지 연구로 2호기 부속시설인 동위원소 생산시설을 제염 및 해체하였다. 이 시설은 동위원소 생산용 콘크리트 핫셀, 납 핫셀 및 실험실로 구성되어 있다. 제염ㆍ해체의 대상물은 흄후드, 실험대, 씽크 및 오염된 내부 시설물이다. 안전한 해체 활동을 위해서 각종 지침서 및 절차서가 수립되었다. 해체 활동을 위해 총 20,933 man-hour의 인력이 소요되었고, 드릴링 머신 등 여러 장비가 투입되었다. 실험실에서의 최대 오염도는 유리성 오염도가 $\beta$ : 9.24 Bq/$\textrm{cm}^2$이였고, 고착성 오염도는 350,000 cpm이였다. 해체폐기물은 콘크리트류, 목재류 및 철재류 등으로 총 62.146 Ton이고, 작업자들의 피폭량은 0.33 mam-mSv로 나타났다.
The purpose of this study was to examine the state of career and employment among dental hygiene students in an attempt to get an accurate grip on their preparation for career and employment. And it's also meant to help improve the efficiency of guidance by dental hygiene education institutions for career and employment. The subjects in this study were every dental hygiene student at three different colleges. After a self-administered survey was conducted, the following findings were given: 1. In regard to the future prospects of dental hygienist, 44.2 percent of the students investigated believed that there would be a bright future for dental hygienist, and 55.8 percent didn't agree to that or considered the prospects to be neither bright nor bleak. 2. As to the motivation of choosing the department of dental hygiene, 51.2 percent thought that it was easy for dental hygienists to get a job, and 22.2 percent wanted to be a professional. 3. Concerning preference for workplace, they hoped to work in a hospital-sized or larger institutions including dental hospitals. As to the reason why they wanted a job, 76.2 percent had their sight set on standing on their own feet. 4. As for the top priority for employment, they took interpersonal relationship into account the most(3.63), followed by aptitude(3.52) and working conditions/environments(3.51). 5. In terms of job values by academic year, all the freshmen, sophomores and juniors attached the most importance to interpersonal relationship. By academic standing in the previous semester, the students who got an A, B or C put more value on human relations, and those who got a D gave more weight to social status and fame. The gap between them was statistically significant. As for the impact of the high schools they graduated from, they took the most statistically significant consideration on interpersonal relationship irrespective of their alma mater.
컨테이너 터미널에서 컨테이너의 양 하역 작업 시 컨테이너 크레인을 정위치에 고정시키고, 돌풍으로 인해 컨테이너 크레인이 레일방향으로 미끄러지는 것을 방지하는 장치가 레일클램프이다. 쐐기형 레일클램프는 초기에는 작은 압착력으로 레일을 압착하다가 풍속이 증가하면 쐐기작용에 의해 압착력이 증가하는 방식을 취함으로서 구조적으로 안정성과 내구성이 높은 장점을 가지고 있다. 본연구에서는 레일클램프의 주요부인 조에 대해 형상최적설계를 수행하였다. 본 논문에서는 솔리드 요소로 유한요소 모델링된 조(jaw)의 경량화 설계를 위하여 강도를 고려하였다. 설계변수로는 조의 측면부의 두께, 조의 중간부의 롤러지지부의 두께, 조의 하단부의 롤러지지부의 두께, 조의 곡면부의 위치로 설정하였다. 본 연구에서는 상용프래그램인 ANSYS WORKBENCH의 최적화 기능을 이용하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.