• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.69-80
• /
• 1993

It is important to prevent roll failure in hot rolling process for reducing maintenance coat and production loss. Roll material and rolling conditions such as the roll force and torque have been intensively investigated to overcome the roll failures. In this study, a computer roll life prediction system under working condition is developed and evaluated on IBM-PC level. The system is composed and fatigue estimation models which are stress analysis, crack propagation, wear and fatigue estimation. Roll damage can be predicted by calculating the stress anplification, crack depth propagation and fatigue level in the roll using this computer model. The developed system is applied to a work roll in actual hot rolling process for reliability evaluation. Roll failures can be diagnosed and the propriety of current working condition can be determined through roll life prediction simulation.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1451-1457
• /
• 1992

본 연구에서는 작업롤의 온도분포를 정상 상태에서 롤의 길이 방향만을 고려 한 경우에 대하여 구한 다음 Fouries 급수로 전개하여 이 온도분포에 따른 작업롤의 축대칭 3차원 열-탄성문제를 해석함으로서 롤의 크라운 양과 열응력을 구하여 이 결과 를 유한요소법에 의한 결과와 비교 검토 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.306-312
• /
• 1992

The prevention of roll breakage in hot rolling process is improtant to reduce maintenance cost and production loss. Rolling conditions such as the roll force and torque have been intensively studied to overcome the roll breakage. in the present work, a model for life prediction of work rolls under working condition was developed and discussed. The model consists of stress analysis, crack propagation, wear and fatigue calculation model. Roll life can be predicted by stress, crack depth and fatigue damage calculated from this model. The reliability of stress analysis is backed up by the FEM analysis. From the result of simulation using by pressent model, although the fatigue damage of back up roll reachs 80% of practical limit, that of workroll was less than 40%. In edge section of workroll stress amplification is found by wear and bender effect. We can judge that workroll failures are not due to fatigue damage, crack propagation by bending stress but stress amplification by wear and bender in present working condition.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.7-13
• /
• 2008

It is important to prevent roll failure in hot rolling process for reducing maintenance cost and production loss. The relationship between rolling pass schedule and the work roll wear profile will be presented. The roll wear pattern is related with roll catastrophic failure. The irregular and deep roll wear pattern should be removed by On-line Roll Grinder(ORG) for roll failure prevention. In this study, a computer roll wear prediction model under real process working condition is developed and evaluated with hot rolling pass schedule. The method of building wear calculation functions for center portion abrasion and marginal abrasion respectively was used to develop a work roll wear prediction mathematical model. The three type rolling schedule are evaluated by wear prediction model. The optimum roll grinding methods is suggested for schedule tree rolling technique.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.403-411
• /
• 1999

The steel plate for shadow mask is used in a Cathode-ray tube of TV monitor and is the strictest product in surface quality because hundreds thousand of holes are perforated in a plane of 25 ${\times}$25 inches. To mass-produce this product, a reversible cold rolling mill for silicon steel was used and the rolling technology and the activity for quality improvement are described in this work. Because the steel plate is a mild steel, which is very sensitive to strip-breakage even in a low tension, we reset the minimum tension values matching to the operating conditions. The roll mark due to the multi-segmented araangement of shape controlling roll was prevented by hardening the intermediate shape controlling roll and by changing the existing working-roll into a HSS (Hig Speed Steel) roll. The scratch caused by the speed difference between a idle roll and a strip was prevented by increasing the roll roughness. With these activities, the steel plate for shadow mask can be stable. The continuous improvement of quality is, however, required for the customer satisfaction both of domestic and overseas market.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.33-40
• /
• 1991

The decrease in surface roughness of work roll and steel strip in cold rolling of low carbon steel strip has been investigated by working distance, materials, total separating force and total reduction ratio. The main results are as follows; For the same lubricating conditions. 1) The changing of surface roughness of steel strip were similar to work roll. The transcription ratio is in inverse proportion to the carbon content of steel strip. 2) The surface roughness of steel strip is hardly change according to changing of total separating force and total reduction ration. 3) The wear of work rolls surface is more rapid in that case of continuous casted steel strip than ingot casted steel strip. The aluminium content dull powder adhere on the rolls surface, and so. It makes the mirror surface of work roll accelerate.

• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1299-1304
• /
• 2010

압연실험을 통해서 폭 방향 변형 편차가 존재하는 실리콘 강판의 가공파손을 고찰하였다. 폭 방향 변형 편차는 강판에 웨이브를 발생시키고 압연방향으로 소재의 에지 부위(혹은 센터 부위)에 인장(혹은 압축)을 준다. 실제 압연기에서 발생하는 웨이브를 실험실적으로 구현하기 위해서 공형롤을 설계 및 제작하였다. 실험에 사용한 소재는 고-실리콘(약 3%) 강판이다. 본 실험을 통해서 센터 웨이브에 의해 발생되는 에지 부위 인장응력이 가공파손에 가장 지배적인 요인이라는 것이 제시되었다. 센터 웨이브를 일으키는 폭 방향 변형 편차의 정도에 따라 에지 파손과 지그재그 형태의 시편 중심 절손을 유발한다는 결과도 도출하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.213-213
• /
• 2010

We investigated the RF sputtering conditions for the deposition of AZO (Al doped ZnO) transparent conducting film on PET using the roll to roll vacuum coater. AZO thin films, sputtered at the various RF powers and working pressures, were studied for their structural, electrical and optical properties.. From the X-Ray diffraction patterns, we calculated the lattice stress using the Bragg equation. The compressive stress tends to decrease with the increase in film thickness. AZO thin film with the thickness of 152nm (1400W, 0.4Pa) exhibit the resistivity of $3.92*10-3{\Omega}/cm$ and the transmittance of 96.9% at 550nm.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.51-59
• /
• 2000

Sink roll has been used in molten 55%Al-Zn alloy bath of continuous galvanizing line for sinking and stabilizing working steel strip in molten metal bath. In the process, the sink roll body inevitably build up dross compounds and pitting on the sink roll surface during 55%Al-Zn alloy coated strip production, and the life time of the sink roll is shorten by build up dross compounds and pitting. The present study examined the application of thermally sprayed ceramic coatings method on sink roll body for improving erosion resistance at molten 55% Al-Zn pool. In this experiment, the stainless steels such as STS 316L and STS 430F were used as the substrate materials. The CoNiCr and WE-Co powder were selected as bond coating materials. Moreover $Al_2O_3-ZrO_2-SiO_2 and ZrO_2-SiO_2$ powders selected as the top coating materials. Appearances of the specimens before and after dipping to molten 55%Al-Zn pool were compared and analyzed. As a result of this study, STS430F of substrate, WC-Co of bond spray coatings, $ZrO_2-SiO_2$ power of top spray coatings is the best quality in erosion resistance test at molten 55%Al-Zn pool

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.82-85
• /
• 2008

We are working towards large-area arrays of thin film transistors on polymer substrates using roll-to-roll (R2R) processes exclusively. Self-aligned imprint lithography (SAIL) is an enabler to pattern and align submicron features on meter-scaled flexible substrates in the R2R environment. The progress, current status and remaining issues of this new fabrication technology are presented.