• 제목/요약/키워드: Working Power

검색결과 1,762건 처리시간 0.026초

첫 자녀 출산 후 취업모와 전업모의 양육스트레스 변화 : 자녀가치, 양육지식, 자녀미래기대가 미치는 영향을 중심으로 (Parenting Stress Changes in Both of Continuous Working and Non-Working Mothers After the Birth of Their First Child : A Focus on the Effects of the Values, Knowledge and Expectations about Their Children)

  • 송영주;이미란;천희영
    • 아동학회지
    • /
    • 제35권5호
    • /
    • pp.15-35
    • /
    • 2014
  • The purpose of this study was to investigate parenting stress changes in both continuous working and continuous non-working mothers after the birth of their first child and their relationships with the cognitive variables about child-rearing, using the 3rd Panel Study on Korean Children(PSKC) by the Korea Institute of Child Care and Education(KICCE). The results revealed that the parenting stress of the non-working mothers was higher than the stress experienced by the working mothers. The increase in stress was only found both groups between the second year and the third year of childbirth. The total explanatory power of the knowledge, values and expectations regarding their children saw stress increase for the working mothers, but saw it decrease for the non-working mothers. Finally, the emotional value surrounding parenthood was the most powerful variable for both groups, with the exception of the non-working mothers' stress, as experienced in the first year.

Effects of inlet working condition and heat load on supercritical CO2 compressor performance

  • Jinze Pei;Yuanyang Zhao;Mingran Zhao;Guangbin Liu;Qichao Yang;Liansheng Li
    • Nuclear Engineering and Technology
    • /
    • 제55권8호
    • /
    • pp.2812-2822
    • /
    • 2023
  • The supercritical carbon dioxide (sCO2) Brayton power cycle is more effective than the conventional power cycle and is more widely applicable to heat sources. The inlet working conditions of the compressor have a higher influence on their operating performance because the thermophysical properties of the CO2 vary dramatically close to the critical point. The flow in the sCO2 compressor is simulated and the compressor performance is analyzed. The results show that the sCO2 centrifugal compressor operates outside of its intended parameters due to the change in inlet temperature. The sCO2 compressor requires more power as the inlet temperature increases. The compressor power is 582 kW when the inlet temperature is at 304 K. But the power is doubled when the inlet temperature increases to 314 K, and the change in the isentropic efficiency is within 5%. The increase in the inlet temperature significantly reduces the risk of condensation in centrifugal compressors. When the heat load of the sCO2 power system changes, the inlet pressure to the turbine can be kept constant by regulating the rotational speed of compressors. With the increase in rotational speed, the incidence loss and condensation risk increase.

이젝터-펌프 온도차발전시스템의 작동유체별 성능분석 (Performance Analysis of Ejector-Pump Thermal Energy Conversion System Using Various Working Fluids)

  • 윤정인;설성훈;손창효;최광환;김영복;이호생;김현주;문정현
    • 동력기계공학회지
    • /
    • 제20권6호
    • /
    • pp.87-92
    • /
    • 2016
  • This research dealt with performance characteristics of OTEC system applying an ejector and additional pump. Each system using five kinds of working fluids was analyzed, and primary parameters with respect to entrainment ratio were examined: Turbine gross power, evaporation capacity, pump work, efficiency and volume flow ratio. The primary results were as following. The efficiency of ejector-pump OTEC system was dependent on entrainment of the ejector. The degree of efficiency change was different from applied working fluid, and amount of pump work was turned out to be primary factor affected system efficiency. Meanwhile, optimized entrainment ratio was different from applied working fluid since their different vapor density. System efficiency at optimized entrainmet ratio of each working fluid was around 5%, showing minor difference each other.

간호조무사의 근무환경인식과 성격성향에 관한 연구 (A Study on the Working Environment Recognition and the Caracter Disposition of Nurse Aides)

  • 이선이
    • 한국보건간호학회지
    • /
    • 제4권1호
    • /
    • pp.57-74
    • /
    • 1990
  • As the whole world took on the tendency to be highly industrialized, it became necessary for each field of occupation to require professional man power. Especially, since the World War n, the participation of woman power in economic activities has been continually increasing. In our country also, because of the rapid economic growth, change in the way of thinking of women as well as their participation in economic activities are increasing. Thus, woman power is being utilized in various occupational fields from simple physical labor to those that require high-professional skill. Also, continued economic development policies, by setting the establishment of welfare society as the ideology to be fulfilled, brought expansion of medical facilities in the field of public health and increase in man power in that field. As for the nursing specialists, more than 6000 have been being produced per year and as of the end of 1988, the total number of nursing specialists, reached 123, 115. Therefore, this study is done to recognize the professional knowledge and ability of nursing specialists, who take up $40\%$ of the total public-health related man power in our country, through evaluating their working environment and their disposition of character. This study, which was done from September 18th to September 30th 1989, took on the method of using formed questionnaires that had been amended and supplemented during two preparatory investigations, 322 of such questionnaires were used as an analytical material. In the formation of questionnaires, 12 questions were related to the working environment, and 26 in fortotal were related to the disposition of character, 5 for wise-disposition, 11 for activedisposition and 10 for open-disposition. The measuring method, which used 5-point-standard, allowed 5 points for affirmative recognition of the working environment, also 5 points for showing wise, active and open disposition of character and only point in opposite cases. Collected materials were analyzed, through an electronic calculation, into the average value, the standard deflection percentage, pearson corelative number and stepwise multiple regression. Summarizing the results from this study is as follows: 1. It was shown that the nursing specialists with the average of 3.07 have affirmative recognition of their working environment. The questions which drew most affirmative reaction were those concerning finance-management system such as hand, the questions that received negative reaction were those concerning communication method with the average of 2.49. Such reaction seems to have resulted from the cramming regulation by the superior authorities. Concerning the recognition of working environment in relation to employment conditions, more affirmative recognition is shown with the average of 3.14. at hospitals where injection job is not performed. The nursing specialists working at regular hospitals show more affirmative recognition than those at general hospitals, the averages being respectiely 3.16 and 3.03. 2. As for the disposition of character of the nursing specialists, active-disposition was highest with the average of 3.38, next was wise-disposition with 3.20 and the lowest was open-diposition with 2.98. Variable-wise disposition of character shows that wise-disposition and academic background are beneficially correlated by 0.12. Ative-disposition and open-disposition show correlation to the office term by respectively 0.16 and 0.21. In other words. better academic background leads to higher wise-disposition and more - experience results in higher active and open disposition. Also, the class that performs the injection job, in relation to the working environment, might cause change in the self-conceit that identify those in that class with the nurses; however, as far as professional judgment and action, in dealing with nursing job, being wise, active and open is concerned, not much effect is made. 3. The relation between the recognition of the working environment and the disposition of character is that more afirmative recognition- a nursing specialist has about her working environment, the higher the active-disposition becomes by 0.13. The degrees of the relation between recongnition of environment and wise and open dispositions show respectively 0.06 and -0.06 and -0.06. That is to say that when having more affirmative recognition of the working environment, a nursing specialist shows wise but closed disposition of character. This, howerver, didn't mean much statistically. When observing the results mentioned above, it is conspicuous that the nursing specialists, working as substitutes for the nurse at medical institutions of various sizes, get the feeling of being somewhat equal to the nurses and to some extent, fulfill their desire to accomplish their ego; however, as far as professional ability expansion if concerned. they lack wise and open dispositions. Therefore, considiering upon the results of this study, in medical institutions where the work of nursing specialists is regaded equal to that of the nurses, as a medical member who deals with human lives, it is desirable to make the nursing specialists work under the supervision of the nurses and to offer them continuous education to strengthen and improve their natural dispositions.

  • PDF

Etching Characteristics of Fine Ta Patterns with Electron Cyclotron Resonance Chlorine Plasma

  • Kim, Sang-Hoon;Woo, Sang-Gyun;Ahn, Jin-Ho
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
    • /
    • pp.97-102
    • /
    • 2000
  • We have studied etching characteristic of Ta film using Electron Cyclotron Resonance (ECR) etcher system. Microwave source power. RF bias power. and working pressure were varied to investigate the etch Profile. And we have used two step etching method to acquire the goWe have studied etching characteristic of Ta film using Electron Cyclotron Resonance (ECR) etcher system. Microwave source power. RF bias power. and working pressure were varied to investigate the etch Profile. And we have used two step etching method to acquire the good etch profile preventing the microloading effect.od etch profile preventing the microloading effect.

  • PDF

R-245fa 및 NOVEC 649 작동유체에 따른 ORC 시스템 성능 변화 (ORC System Performance Analysis upon R-245fa and Novec 649)

  • 장홍순;한영섭;송영길;김성현
    • 한국지열·수열에너지학회논문집
    • /
    • 제12권3호
    • /
    • pp.17-23
    • /
    • 2016
  • A test unit for Organic Rankine Cycle (ORC) power generation system was developed and experimentally reviewed the performance of the ORC system. Two different organic fluids (R-245fa & Novec 649) were tested as working fluids for the system. System behavior was measured and analyzed along with the variables, such as temperature, pressure, rpm and shaft power. It is one of the findings that Novec 649 fluid is to be less pressurized than R-245fa in order to up to the heat source (boiler) capacity, that limits the experiment as high as 2 kW in shaft power.

MHD발전용 작동 플라즈마를 고온가열하기 위한 효율적 방안에 관한 연구 (Studies on a Effective Scheme to Obtain High Temperature Working Plasma for MHD Power Generation)

  • 김윤식;노창주;김영길;공영경;최춘성
    • 대한기계학회논문집
    • /
    • 제17권1호
    • /
    • pp.153-161
    • /
    • 1993
  • 본 연구에서는 각 운전모드별 열특성을 전체적으로 고려하여 양질의 MHD발전 용 작동플라즈마를 얻기 위하여 필요한 효과적인 방책에 관하여 집중적으로 고찰하고 자 한다.

Impact test of a centrifugal pump used in nuclear power plant under aircraft crash scenario

  • Huang, Tao;Chen, Mengmeng;Li, Zhongcheng;Dong, Zhanfa;Zhang, Tiejian;Zhou, Zhiguang
    • Nuclear Engineering and Technology
    • /
    • 제53권6호
    • /
    • pp.1858-1868
    • /
    • 2021
  • Resisting an accidental impact of large commercial aircrafts is an important aspect of advanced nuclear power plant (NPP) design. Especially after the 9·11 event, some regulations were enacted, which required the design of NPPs should consider the accidental impact of large commercial aircrafts. Normal working of equipment is important for stopping reactor under an impact when an NPP is in operation. However, there is a lack of reliable analysis and research on the impact test of nuclear prototype equipment. Therefore, in order to study the response of the equipment under high acceleration impact, a centrifugal pump is selected as the research object to perform the impact test. A horizontal half-sinusoidal pulse wave was applied to the working pump. The test results show that the horizontal response of the motor and flange is greater compared to other parts, as well as the vertical response of the coupling. The stress response of the pump body support and motor support is high, hence these parts should be considered in the design of the pump. Finally, combined with the damage and stress evaluation results of the pump under different amplitudes, the ultimate impact acceleration that the pump can withstand is given.

Ergonomic and performance analysis of rail-type boom sprayer for agro-photovoltaic power system

  • Rack-Woo Kim;Jae-Woong Han;Woong Kim
    • 농업과학연구
    • /
    • 제49권1호
    • /
    • pp.151-162
    • /
    • 2022
  • This study was conducted to develop a rail-type boom sprayer, performing safe spraying with improved ergonomic postures during pesticide spraying of agro-photovoltaic power system. The sprayer was designed to reduce labor cost and to be safe from pesticide exposure, and was analyzed through a comparison with a conventional spray method. The rail-type boom sprayer, consisted of a self-propelled spray and hose winder, hose, and boom sprayer parts, was designed to automatically pull and spray in the vertical and horizontal directions. The performance of the sprayer for an agro-photovoltaic power system was appropriate. From the analysis of postures with the Ovako Working posture Analysis System (OWAS), Rapid Entire Body Assessment (REBA), and Rapid Upper Limb Assessment (RULA) methods, the musculoskeletal risk factors to the body using the rail-type boom sprayer were less than those with the conventional power sprayer. In addition, the possibility of pesticide poisoning was reduced compared to the conventional power sprayer. The working capacity with the rail-type boom sprayer was more than five times greater, compared with the conventional power sprayer. After performing pesticide spraying with the rail-type boom sprayer, the labor cost was reduced to 42,750 won·yr-1, which was 90% (402,750 won·yr-1) less than the cost with the use of a conventional power sprayer (445,500 won·yr-1).

고발열 전자부품 냉각용 써모사이폰의 냉각특성에 관한 연구 (Experimental study on the cooling characteristics of thermosyphon for the high power electronic components)

  • 김광수;김원태;송규섭;이기백
    • 설비공학논문집
    • /
    • 제10권2호
    • /
    • pp.137-146
    • /
    • 1998
  • The experimental study is concerned with two-phase closed thermosyphons, (i.e., wickless heat pipes) for the cooling of high power electronic components in telecommunication system. The thermosyphon which can deal with a high heat flux of up to $4.9W/cm^2$ is developed, and the cooling characteristics of thermosyphon is analyzed according to design parameters which are the types of and quantity of working fluid, number of pipes, wire insertion in pipe, inclination angle of thermosyphon, and cooling air velocity. Using water as working fluid is superior cooling performance compared to using acetone, and cooling performance is improved as the number of thermosyphon becomes larger, inserting wires in the pipes, and inclination of $30~60^{\circ}$.

  • PDF