• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.18-23
• /
• 2019

The oil immersion method can be used to create objective lenses with long working distances without sacrificing the focusing resolution for laser processing. In this study, a space in which air or oil can be filled was formed in the middle of a lens for analyzing the optical properties of a liquid-oil immersion lens. As the refractive media, air and oils of different refractive index values (1.2 and 1.5, respectively) were used. A simulation was conducted in the ZEMAX software environment using the ray-tracing technique, and the performance of the oil immersion lens was verified by determining its image distortion and focal length (FL) in each medium. In the case of air, the calculated FL was 0.813 mm, whereas the imaged FLs were 1.594 mm and 8.126 mm when the refraction indices were 1.2 and 1.5, respectively. The FL of an oil immersion lens could be increased considerably. In terms of image distortion, the oil immersion lens exhibited little distortion at the center in all cases, but different degrees of image distortion were observed at different points away from the center depending on the refraction index degree.

• Advances in concrete construction
• /
• v.10 no.6
• /
• pp.559-571
• /
• 2020

This study aimed to inspect the axial compression mechanical performance of basalt-fiber-reinforced recycled - concrete (BFRRC)-filled square steel tubular stub column. The replacement ratio of recycled coarse aggregate (RCA) and the basalt fiber (BF) dosage were used as variation parameters, and the axial compression performance tests of 15 BFRRC-filled square steel tubular stub column specimens were conducted. The failure mode and the load-displacement/strain curve of the specimen were measured. The working process of the BFRRC-filled square steel tubular stub column was divided into three stages, namely, elastic-elastoplasticity, sudden drawdown, and plasticity. The influence of the design parameters on the peak bearing capacity, energy dissipation performance, and other axial compression performance indexes was discussed. A mathematical model of segmental stiffness degradation was proposed on the basis of the degradation law of combined secant-stiffness under axial compression. The full-process curve equation of axial compressive stress-strain was proposed by introducing the influencing factors, including the RCA replacement ratio and the BF dosage, and the calculated curve agreed well with the test-measured curve.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.6
• /
• pp.637-645
• /
• 2020

In this paper, entransy analysis is carried out for combined heat and power (CHP) generation system driven by low-grade heat source compared with energy and exergy analyses. The system consists of a regenerative organic rankine cycle (ORC) and an additional process heater in a series circuit. Special attention is paid to the effects of the turbine inlet pressure, source temperature, and the working fluid on the thermodynamic performance of the system. Results showed that the work efficiency of entransy is higher than that of energy but lower than that of exergy, wheress the process heat efficiency of entransy is lower than that of energy but higher than that of exergy. Entrance analysis showed the potential to complement the exergy analysis in the optimal design of the energy system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.1
• /
• pp.77-85
• /
• 2021

In this paper, entransy analysis is carried out for combined heat and power (CHP) generation system driven by low-grade heat source compared with energy and exergy analyses. The system consists of an organic Rankine cycle (ORC) and an additional process heater in a parallel circuit. Special attention is paid to the effects of the source temperature, turbine inlet pressure, and the working fluid on the thermodynamic performance of the system. Results showed that the work efficiency of entransy is higher than that of energy but lower than that of exergy, wheress the process heat efficiency of entransy is lower than that of energy but higher than that of exergy. Entrancy analysis showed the potential to complement the exergy analysis in the optimal design of the energy system.

• International Journal of Quality Innovation
• /
• v.9 no.1
• /
• pp.1-21
• /
• 2008

A Purpose. As organizations become more team oriented, research on teams continues to increase especially involving how teams contribute to organizational performance and effectiveness. Although there has been existing research on Kaizen teams in the private sector, very little research has included Kaizen teams in the public sector. In this paper, we present a method to study Kaizen teams in a local Spanish government that have been using Kaizen teams for more than ten years. Design/methodology/approach. Quantitative research was adopted for this study. Twenty teams participated in the study by filling out the Team Learning and Development Inventory (TLI) proposed by Lingham (2004). In addition, we interviewed members of the teams in order to clarify and assure our quantitative results. Findings Based on the findings, we propose that Kaizen teams should practice both Continuous (CI) and Process Improvements (PI) in their projects. We also propose that Kaizen teams should not be teams skilled only at developing better improvement processes (both CI and PI) for the organization but that such teams should also be skilled at engaging in team development using both CI and PI processes internally-a Kaizen within Kaizen teams approach. Research limitations. Its based in one case study. However, it is working paper and the research project still is developing. Practical Implications (if possible). Serve as a guide to practitioners (Public managers) who desire to understand how their Kaizen teams involves both internal (conversational spaces) and external (methodology) perspectives that would contribute to both team and organizational effectiveness. In this paper, we focus on the Internal Processes (both CI and PI) using the TLI as an effective method for Kaizen teams to engage in the Kaizen process. Originality/value. This study is one of the first to look at team's performance using Team Learning and Development Inventory in Spain's public sector. It is also the first to mention about the relationship of the team's performance and the implementation of process improvement methodologies in Spain local government environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.149-158
• /
• 2015

Up-to-date manufacturing companies have faced a market-driven environment of pull production order. There should be a difference in operating manufacturing resources according to the type, quantity, and delivery time of manufactured products, because the process situation in pull production is changed by customer orders. And it should be taken into account from the stage of preparing for production such as process design and the placement and utilization of manufacturing resources. However, the feasibility of production plans is limited because most of small manufacturing businesses make production/supply plan of the parts and products assuming that equipment abilities in scheduling is sufficient without managing process standard information systemically. In this study, a discrete event simulation system based on BOM (bill of material), that is F-OPIS (online productivity innovation system), is introduced and a case study on application of the system leading to improving productivities is presented. F-OPIS deals with a decision-problem on production management and it is specialized for small-and- medium sized manufacturing companies. The target company of this case study is a typical small-and-medium sized manufacturing company in Korea, that produces various machined parts. The target company adopts make-to-stock production management to prevent tardy delivery because of fluctuations in demand. Therefore, it is required to apply an efficient inventory control solution for improving productivities. In this paper, based on the constraints of working capacity of manufacturing resources, the bottleneck process is analyzed as production conditions are changed. Consequently, an improvement plan is proposed, that eventually enhances overall utilization rates of resources in the bottleneck process and reduces overall production lead-time and inventory level.

• Journal of KIBIM
• /
• v.10 no.4
• /
• pp.22-31
• /
• 2020

Shop drawing tasks conducted after finishing coordinated or engineering design have great influences on the quality and cost of a project. However, despite the development of commercial BIM applications, shop drawings have mainly produced manually in certain engineering fields. Incorrect shop drawings with human errors have occurred various problems such as cost overrun, time delay and reworks. An automated shop drawing publishing from BIM is expected to resolve these problems. Despite attempts for automate shop drawing production, the field of mechanical, electrical and plumbing (MEP) is yet regarded challenging due to complexity of components and connection. In this research, we develop a process for automated producing 3D MEP shop drawings in BIM environment as following steps: to analyze conventional MEP shop drawing process, to identify detailed process that can be automated, to classify existing MEP objects and assign codes usable in BIM, and to develop an application. The validation of automated process is conducted against 10 clean room projects in which MEP is more complex and its cost is higher than other projects in terms of productivity and workers' satisfaction. Results show that the number of manpower for shop drawing is reduced by 30%, and the working time is shortened by 31%. Personal opinions of involved practitioners is interpreted as positive as the average rate of agrement on practicability, easy-to-use and necessary retouch tasks is around 66%.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.120-131
• /
• 2012

Today, companies exist amid unlimited competition and uncertain adminstration environment, so hands-on workers are being exposed to various job requirements and stress due to this. Especially, employees in the design firm are physically difficult because of heavy working intensity unlike other industrial field, and because the process is interrelated unlike working of a five-day workday of the other industry, it is difficult to guarantee periodic holidays and vacation. In addition, recently, while BIM is introduced in the construction industry, various changes in the individual role as well as organizational dimension such as business environment and scope & role, etc. are required, so it is the actual situation that the category and factors of job stress due to this are being also changed. Accordingly, this research has grasped important and weak sectors according to characteristics such as career, position, gender, education and existence/nonexistence of BIM template, etc. by confirming a job stress level and inducing factors of hands-on workers at the design firm. This research has a meaning in constructing a business environment of a design firm that is a main participant of BIM-based projects that are expected to have high utilization in the future.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.3-13
• /
• 2011

The Korean society is recently becoming the aging society at an unprecedentedly rapid speed. Following the increase of the older population, their needs for special care is also rocketing. However, due to the increase of working women, nuclear-families, and old persons living alone, new facilities for the elderly such as nursing home are urgently needed. Thus, many nursing homes for the elderly are also rapidly providing. It is needed to examine if such nursing homes are properly designed for the dependent elderly to live. This study was carried out by the field observation using a checking sheet with measuring and taking photograph. The subjects were 12 nursing homes which gave positive responses for walking through their facilities. The items for observing and measuring were made based on the regulation on improving the facilities for the disabled, the elderly, and the pregnant. Whether each item fits the regulation or not was examined. The 9 areas in each nursing home were examined : entrance, hallway and corridor, stair, elevator, ramp, bed room, shower and locker room, bathroom, and rest room. It was founded that many accessible-related items were met. However, many supportive-related items such as ones for the visual disabled, and many supportive-related and accessible-related ones for bathroom, shower room, and restroom were unmet. In the process of this research, it was founded that the tool for evaluating the design of nursing home in terms of universal design should be developed.

• Journal of the Korean housing association
• /
• v.15 no.5
• /
• pp.21-32
• /
• 2004

The purpose of this study is to interpret Gaudi's philosophy of architecture through an analysis of the design characteristics in his remodeling of Casa Battlo. A review of the literature related to Casa Battlo as well as a field study in Barcelona to see the building were made for this study. The conclusions were as follows; Casa Battle is one of the best examples of Gaudi's attempts at creating a surreal atmosphere and should be evaluated in light of the following considerations: 1) Casa Battle as a remodeled house presented its own restrictions to Gaudi that he overcame by introducing characteristic design elements into the remodeling process; 2) the achievement, a perfect sculpture expressing continuity through a gorgeous colour scheme using different materials and design motifs with a dynamic spiral shape, originated from Gaudi's observations of nature and his experiences working in modeling studios; 3) a visualized embodiment of Gaudi's naturalism and functionalism through the impression of perpetual movement and continuity as formative symbols of genesis, life, death, and transmigration of the soul, originated from Gaudi's personal experiences of the early deaths of several close family members; 4) the design is meant to show the same processes of creation used by nature rather than a mere imitation of nature. Gaudi was not only a person dedicated obsessively to his profession as an architect, but also a rationalist fundamentally in the way he operated. It was expected that this study could be employed as a small stimulus to challenge the paradigm of housing remodeling projects -a hot issue in today's Korea- especially in their philosophical aspect.