• Architectural research
• /
• 제20권4호
• /
• pp.147-152
• /
• 2018

As construction projects become larger, process plans become more complex, and inadequate process management leads to waste of time and resources. Effective process management requires process management techniques that can identify problems inherent in the process, continuously improve, and reflect interdependent process characteristics. In the field, the day's details by work type and work status are to be entered in the work daily report. However, even when important information is written, it is not directly linked to the overall process management. This study aims to propose specific process management and decision-making plan based on actual worker by visualizing and quantifying the information described in the existing work daily report. It is expected efficient process management to increase reliability and productivity through process management, which can increase the utilization of work daily reports and facilitates organic communication among participants.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.811-812
• /
• 2016

Wiring Harness는 자동차들 구동시키는데 필요한 전기적 신호를 전달하는 매개체 역할을 하며 자동차 성능에 많은 영향을 받는다. 현재의 작업현장에서의 Wiring Harness 작업은 작업자의 수작업에 의존하고 있어 생산성이 낮고 제품불량률도 높다. 따라서 본 연구에서는 반복적인 휴먼에러 낮추기 위해, LED 점등에 의해 순차적으로 지시하고 동시에 확인 검사를 수행할 수 있는 무선 하네스 컨베이어 시스템을 구현한다. 그리고 결과에 의해 공정개선을 통해 자동화를 개선한다. 또한 작업자의 생산성을 높이고 불량을 감소시킨다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.328-335
• /
• 2022

With the advance of robot capabilities and functionalities, construction robots assisting construction workers have been increasingly deployed on construction sites to improve safety, efficiency and productivity. For close-proximity human-robot collaboration in construction sites, robots need to be aware of the context, especially construction worker's behavior, in real-time to avoid collision with workers. To recognize human behavior, most previous studies obtained 3D human poses using a single camera or an RGB-depth (RGB-D) camera. However, single-camera detection has limitations such as occlusions, detection failure, and sensor malfunction, and an RGB-D camera may suffer from interference from lighting conditions and surface material. To address these issues, this study proposes a novel method of 3D human pose estimation by extracting 2D location of each joint from multiple images captured at the same time from different viewpoints, fusing each joint's 2D locations, and estimating the 3D joint location. For higher accuracy, the probabilistic representation is used to extract the 2D location of the joints, considering each joint location extracted from images as a noisy partial observation. Then, this study estimates the 3D human pose by fusing the probabilistic 2D joint locations to maximize the likelihood. The proposed method was evaluated in both simulation and laboratory settings, and the results demonstrated the accuracy of estimation and the feasibility in practice. This study contributes to ensuring human safety in close-proximity human-robot collaboration by providing a novel method of 3D human pose estimation.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.39-44
• /
• 2017

The domestic mold industry is composed of 6,560 small and medium sized mold companies as of 2015. The structure of mold industry centered on less than 10 people in the past has been improved in the direction of increasing number of medium and large scale companies with more than 20 competitors with global competitiveness and has maintained its position as the world's second largest mold exporter with global competitiveness. Nevertheless, the manpower structure and corporate competitiveness structure of the mold industry is very high, with the proportion of production manpower reaching 70% and shortage rate of 10% or more in order to respond to the orders of customers. However, the development base for new employees with technological skills required by the industrial field is poor, and the inflow of young people is very limited due to factors such as the avoidance of small and medium enterprises and production jobs. It is expected that the labor shortage of mold enterprises will be further increased in the future. In the mold industry, due to the characteristics of small quantity multi-product production corresponding to the demand of the consumer, many production processes are individually and independently carried out, resulting in low labor productivity, and the structural time required for the worker to increase the working time Due to limitations, the working hours per week of the employees are about 50 hours. The implementation of the working time reduction bill, which is recently promoted by the government, is a crisis factor. In order to cultivate the mold industry, it is necessary to expand the base of molds to meet the intensification of global competition, the convergence of technologies to actively respond to the restructuring of the industrial structure, and the response to the new industry, It is necessary to improve labor productivity through policies such as development and dissemination of system, and to secure price, delivery and quality competitiveness in global market.

• 한국시뮬레이션학회논문지
• /
• 제19권1호
• /
• pp.73-82
• /
• 2010

전 세계 조선 산업에서 생산성의 향상이 크게 이슈화되면서, 생산 라인의 생산성 향상을 위해 새로운 방법론, 생산 자동화, 향상된 생산계획 및 일정계획 등의 연구가 진행되어 왔다. 본 연구는 조선 생산의 일정계획과 관련하여 소조립 라인의 소일정계획의 최적화를 통한 생산성 향상에 관한 것이다. 소조립 라인의 소일정계획 최적화를 위하여 공정 별 작업자 배치와 운용에 관한 시나리오와 스키드 패턴의 투입 순서를 미정 다항식 문제로 정식화하고 문제 해결하기 위해 메타휴리스틱 방법 중 하나이며 확률변수를 사용하는 시뮬레이티드 어닐링을 적용하여 지역 최소값에 빠지는 것을 막고 전역 최소값을 찾도록 하였다. 실제 조선소의 소조립 라인의 작업 시간 데이터와 스키드 투입 순서 데이터를 사용하여 최적화를 수행하고 최적화 결과의 효과를 검증하였다.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.149-158
• /
• 2018

Background: Work comfort studies have been extensively conducted, especially in the underground and meteorological fields resulting in an avalanche of recommendations for their evaluation. Nevertheless, no known or universally accepted model for comprehensively assessing the thermal work condition of the underground mine environment is currently available. Current literature presents several methods and techniques, but none of these can expansively assess the underground mine environment since most methods consider only one or a few defined factors and neglect others. Some are specifically formulated for the built and meteorological climates, thus making them unsuitable to accurately assess the climatic conditions in underground development and production workings. Methods: This paper presents a series of sensitivity analyses to assess the impact of environmental parameters and metabolic rate on the thermal comfort for underground mining applications. An approach was developed in the form of a "comfort model" which applied comfort parameters to extensively assess the climatic conditions in the deep, hot, and humid underground mines. Results: Simulation analysis predicted comfort limits in the form of required sweat rate and maximum skin wettedness. Tolerable worker exposure times to minimize thermal strain due to dehydration are predicted. Conclusion: The analysis determined the optimal air velocity for thermal comfort to be 1.5 m/s. The results also identified humidity to contribute more to deviations from thermal comfort than other comfort parameters. It is expected that this new approach will significantly help in managing heat stress issues in underground mines and thus improve productivity, safety, and health.

• 한국관광식음료학회지:관광식음료경영연구
• /
• 제9권
• /
• pp.213-242
• /
• 1998

Even in the best of economic environments, restaurants menu pricing is a serious concern to those in the food service industry. During times of rapid inflation, closer government regulation of compensation practices, and limited gains in worker productivity, the decisions regarding the proper charge for menu items become increasingly important. In addition to many operational and managerial factors, an important ingredient in the food service enterprise's success is its ability to meet the market by providing the value expected. The contribution-margin approach to pricing described above is familiar to cost accountants, who will also recognize that it admits of much elaboration before it can become a tool for day-to-day decisions. But the system probably has the greatest promise for multi-unit companies, where the cost benefit ratio of additional refinements improves in proportion to the number of operations. For example, the analysis required to specify the demand function better becomes less expensive if the findings can be applied to the pricing structure of numerous units. In any of its many adaptations, the essence of the integrated menu pricing system remains its ability to bring together the relevant revenues and costs with the operator's sense of the market and competitive environment to suggest prices that maximize profits.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.235-239
• /
• 2009

As robotic technologies have become more actively utilized to automate many construction tasks, they have been able to improve the construction productivity, quality, and worker's safety on site. A new advanced system, Robot-based Construction Automation (RCA) system, is currently being developed. To accomplish RCA system effectively, Design for automation (DFA) should be performed in automation system developing phase. The performance criteria of this system are a major cause of design changes. It is required exhaustive review for development new system. This research analyzed the design changes of Climbing Hydraulic Robot system and Construction Factory (CF), being currently developed in the field of applied RCA systems. And the design change matters according to performance criteria in each system's design-by-step were analyzed. The purpose of this research is developing the performance criteria in the developing phase of RCA system, and then will be served as basis for system design in similar projects.

• 한국인구학
• /
• 제26권1호
• /
• pp.115-141
• /
• 2003

본 연구의 목적은 미국 인구의 고령화 과정에서 장기적인 조기퇴직의 경향과 1985년 이후 일어난 그것의 역전현상에 주목하면서, 그것에 기여하는 사회경제적 여건과 사회정책 프로그램의 변화를 검토하는 것이다. 미국인의 조기퇴직, 곧 퇴직연령 하락의 주원인은 장기적인 부(富)의 증대이며, 이것은 고령 노동자들이 소득창출을 위한 유급노동시장 참여를 하지 않고서도 높은 수준의 생활을 가능하도록 하였다. 사회보장 퇴직연금과 기업 연금제도의 확대 성장은 강제퇴직제도의 도입과 아울러 1980년대 중반까지 조직퇴직의 증가추이에 공헌하였다. 본 연구는 최근의 조기퇴직 역전현상을 지속시킬 수 있는 유인책으로서 고령자 사회정책 프로그램 등에 주목한다. 물론, 여기서 과연 조기퇴직의 역전을 가져오는 사회정책이 필요한가에 대한 질문이다. 환언하면, 노동생산성의 증대나 은퇴전의 근면성(勤勉性)의 향상은 미국인들이 평균수명의 신장으로 퇴직, 곧 "제3의 인생" 이 길어진다고 하더라도 보다 높은 사회생활을 유지하는데 아무런 어려움이 없을 것임을 의미한다. 대부분의 미국인은 현행 각종 사회정책 프로그램이 현역 노동자들에게 상당한 부담을 가져다주더라도 조기퇴직을 허용하는 각종 사회정책 프로그램이 유지되기를 원하고 있다. 이러한 관점에서 볼 때, 미국의 고령자 사회정책은 조기퇴직의 역전을 지속하려는 정책을 계속하기보다는 현역 노동자의 근면성 향상이나 노동생산성의 향상에 초점을 맞추는 프로그램의 개발에도 관심을 집중할 필요가 있을 것이다.요가 있을 것이다.

• 사상체질의학회지
• /
• 제12권1호
• /
• pp.37-47
• /
• 2000

작업자의 기질적 특성, 능력 등을 고려하지 않고 이루어진 작업들은 제조현장의 많은 문제점들이 되고 있으며 이런 결과들은 산업재해 및 직업병의 원인을 제공할 뿐만 아니라 제조경영 관점에서 품질 및 생산성 저하의 결과들을 초래하고 있는 실정이다. 따라서 본 연구에서는 이와 같은 제반 문제점들을 해결하기 위해 중소기업의 작업특성과 사상체질간의 구명을 시도한다. 체질의 기존의 이론인 사상체질(태양인, 태음인, 소양인, 소음인)을 QSCC II와 한의사의 도움으로 실질적인 구분을 실시하고, 체질이론의 공학적 응용의 기존문헌을 고찰한다. 또한 본 연구에서는 농기계 전문생산 업체를 중심으로 특정 사상체질의 작업자 중심으로 주요 작업특성을 해석하고 그 결과 작업자의 체질에 따라 작업특성이 다르게 나타남을 알 수 있다. 한편, 실증적 연구로서 비디오 카메라로 촬영한 작업현장의 장면을 가상현실 장비 및 EEGs를 사용하여 체질변화에 따른 작업자의 뇌파효과를 조사한다. 조사된 뇌파 데이터를 통계분석 처리하여 그 다양한 뇌파 변화의 관계성을 보여준다. 최종 연구결과들은 추후 작업특성간의 비교 연구과정을 통해 기업의 생산성 향상과 품질 증진에 크게 공헌할 것으로 추측된다.