• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.116-123
• /
• 1999

It is generally considered that only questionnares, collected at the time when each course close, have been evaluated & represented for all of the subjects. But all the result of each course can be actually evaluated using only the data taken from how to apply for at the construction site or at the factory, directly, for the period of at least one year, not just short months. This study is to evaluate and quantify the result and analyses using the data from questionnare concerning the level practically applied to each process at construction site. 1st for three(3) months, 2nd for six(6) months, 3rd for nine(9) months, finally 4th for twelve (12) months, one year These questionnares have been distributed for same people four(4) times to find out what to, how to be applied with each subject.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.583-584
• /
• 2005

In this work, a novel hybrid FL sensor consisting of two Rogowski coils has been designed for the installation on the ground wire of the transmission tower. The operation range of these coils is as follows: 30kA for the fault current comingfrom the ground fault or short-circuit and for the lightning current up to 150kA over 500kHz. Thus, two important functions could be provided: one is to detect the fault current and the other one is to find the fault location between towers or the location of induced lightning stroke. The on-site investigation at 800kV test yard has been under progress for its on-site application.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1017-1021
• /
• 2005

There is a need for effective tracking and control of material loading and delivery time especially during the finishing-work phases to eliminate the need for lay-down space on the site. Hence, it is essential to monitor the relevant information regarding material procurement in construction sites, and it is also the key factor for successful site control and the adoption of the Just-in-Time concept for high-rise building construction. The purpose of this study is to test RFID's readability in order to develop a finishing material monitoring system through the application of RFID technology.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.34-35
• /
• 2021

Currently, the Korean Smart Construction Corporation aims to stimulate overseas expansion of smart construction technology centered on Expressway development. In addition, the integrated classification system of construction information with Work Breakdown Structure(WBS) is currently being established in Korea, but its application to the construction industry is limited. In this study, data generation using simulation is carried out at the lowest level of WBS presented by the Korea Expressway Corporation, and detailed process productivity is predicted by site conditions.

• Journal of the Korea Institute of Construction Safety
• /
• v.3 no.1
• /
• pp.32-40
• /
• 2020

In this study, an application was developed to reduce the work between labor and safety managers and to hire better workers when hiring workers. With the expected increase in foreign workers in the future, the number of illegal workers will also increase. As a result, accident and on-site management are becoming more difficult due to insufficient information collection of workers. Therefore, it was possible to secure on-site safety through an application that could collect accurate information and reduce the time of information exchange between safety managers and labor managers. In addition, the application was designed to help the safety manager identify the faithful workers more quickly when re-employment of the day laborers if many day laborers were assessed and filled out as they were. This anticipates the expected effect of shortening the construction period. The current application collected necessary information through an interview with the site manager. If the company collects more information needed in the field and has big data than it has collected necessary information so far, it will be highly competitive in the market as it can improve the completeness of applications by establishing opinions and reflecting information accordingly.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.3
• /
• pp.65-73
• /
• 2020

Exposure assessment methodology for outdoor air inhalation pathways (i.e., inhalation of volatile compounds and fugitive dust in outdoor air) was investigated. Default values of several parameters currently used in Korea (e.g., Q/C; inverse value of concentration per unit flux, and frs; soil fraction in PM10) may not be suitable and lack site-specificity, as they have been adopted from the risk assessment guidance of the United States or the Netherlands. Such limitation can be addressed to a certain degree by incorporating the volatilization factor (VF) and the particulate emission factor (PEF) with Box model. This approach was applied to an exposure assessment of a site contaminated with petroleum hydrocarbons in Korea. The result indicated that the suggested methodology led to more accurate site-specific exposure assessment for outdoor inhalation pathways. Further work to establish methodology to determine site-specific Q/C values in Korea needs to be done to secure the reliability of the exposure assessment for outdoor air inhalation pathways.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.3
• /
• pp.212-221
• /
• 2007

This paper describes on the evaluation and management of work process in suction hopper dredger and grab bucket dredger as an application of a PC-based ECDIS system. The dynamic tracking of dredging bucket and the data logging of grab dredging information were performed by using the grab dredging vessel "Kunwoong G-18". The position and route tracking of the dredger moving toward the ocean dumping site of dredged material was performed by using the hopper dredging vessel "Samyang-7". The evaluation of wok process in the dredging field, for grab dredger, was continuously carried out on January to May, 2006, in Incheon Hang and for hopper dredger, on July to December, 2003, in Busan Hang, Korea. The dredging information, such as dredger's position, heading, dredging depth and route track which was individually time stamped during the dredging operation, was automatically processed in real-time on the ECDIS and displayed simultaneously on the S-57 ENC chart. From these results, we conclude that the ECDIS system can be applied as a tool in order to manage the work process during the dredging operation, and also in order to generate the factual record of the dredging activities that is sufficient for dredging inspector to accurately evaluate the contract performance even in the absence of a full-time onboard inspector.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.55-56
• /
• 2018

In order to reduce the risk of accidents, we proposed a construction safety management system combined with wearable device and LoRa (Low-Range Wireless Network) communication method to apply the usefulness of Internet (IoT) technology which means "everything connected". to construction safety management Management system. The proposed wearable safety device is a device that relays information exchange between wearable safety device and safety management server by LoRa wireless communication method. The safety management server can store workers bio-data and perform big data analysis. If a risk factor is determined from the analysis result, a warning is sent to the wearable safety device and the manager's application. The goal of this system is to prevent construction workers from entering the dangerous area that is not suitable for work, and to prevent safety accidents caused by human cause by detecting abnormal condition during work.

• Journal of the Korean Professional Engineers Association
• /
• v.44 no.6
• /
• pp.45-50
• /
• 2011

As the Deep Cement Mixing Method is composed of drilled natural soft soil structure and injected cement slurry to be mix together in it, the nature of excavated ground is influenced directly to the application of constructability. Also the nature of in situ soil is the main material, the mix design and construction work plan should be established before the investigation of soil which is performed through the whole site confirm the soil parameter before construction. The nature of investigated soil and water level as should be performed accurately.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.211-212
• /
• 2011

The construction industry has become larger and higher in size. The process of high-rise building construction is complicated and has various conditions affecting productivity. Analysing productivity in high-rise buildings is difficult despite the various productivity analysis methods. In this study, data was collected from actual construction site to analyse the productivity of curtain wall operation by means of Work sampling and Method Productivity Delay Model. As a result, this paper suggests advantages and disadvantages deducted from comparing the two productivity analysis methods.