• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.5
• /
• pp.133-140
• /
• 2019

Building Information Modeling (BIM) and modular construction are regarded as important technologies that could contribute to overcoming the crisis faced by the construction industry. However, BIM uptake in current modular construction projects is limited. Moreover, there are no specific guidelines to support decision-making regarding the application of BIM in modular construction projects. Therefore, this study aims to analyze the possibility for BIM uptake in each phase of modular construction projects in Korea. Initially, the literature detailing on BIM uptake cases in modular construction projects was reviewed. The detailed work and activities for each phase of a modular project were analyzed via a questionnaire targeting domestic modular experts, to derive items requiring improvement due to errors or changes occurring in the actual project. Ten realistic BIM uptake items were derived, reflecting the results of literature review and expert interviews. Then, the BIM uptake items in each phase were analyzed in terms of necessity and efficiency via a second questionnaire using five-point Likert scales. Finally, the BIM utilization index (BIM UI) of the BIM uptake items was suggested as a priority measure. As a result, the BIM UI of "3D coordination" (U2), "design authoring and reviews for off-site fabrication" (U3), and "detailed 3D modeling for off-site fabrication" (U4), were assigned the highest priority. The results of this study can be used as guidelines to support decision-making regarding the application of BIM in modular construction projects.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.83-93
• /
• 2010

With construction projects continuously becoming more massive and complex, risk factors have been consistently increasing. To achieve a successful project, it is very important to identify and cope with such risk factors. Therefore, the purpose of this study is to suggest plans of reducing risk, not only for describing the drafting process for construction planning but also for systematically organizing constraints and risk factors in earth work, foundation work and reinforced concrete construction. To achieve these objectives, this study 1) analyzes previous theories about risk classification structure, 2) performs a case study of an actual project to embody the problems of safety management by analyzing the results of an interview with a construction engineer. In conclusion, the following factors were systematically organized: 1) characteristics of construction site (purpose, structure, floor, etc.); 2) the actual application conditions of the main construction methods; 3) the relationship between constraints and risk factors.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.309-318
• /
• 2011

The web trend has been flowed from portal site to user created contents site, recently. Therefore, many companies have suggested web program of producing contents for user's convenience. However, web applications that are operated in various web browsers and heterogeneous devices have many problems regarding distribution and management so far. Because of diverse one-source data formats. In this paper, we present an integrative displaying and distributing tool (IDD-Tool) for editing, distributing and managing multimedia contents and environment so that users can work. It is inspected that the tool is widely used in the fields of education, publication, corporations and etc. because a user can participates in contents producing easily in personal customized workplace with IDD-Tool and contents made by IDD-Tool are distributed.

• Journal of Environmental Science International
• /
• v.28 no.10
• /
• pp.887-898
• /
• 2019

Rehabilitation work is required to increase well productivity, which decreases with the elapsed time of pumping owing to the clogging of the water well. Clogging causes not only a reduction in the well productivity but also a deterioration of the water quality. For unclogging and rehabilitating wells, several techniques are used such as brushing, air surging, surge blocks, and gas impulse. In this study, the high-pressure air impulse technique, which effectively and economically rehabilitates wells, was applied to a riverbank filtration site in Korea for the same objective. At most of the wells, the hydraulic parameters (transmissivity, storage coefficient, and specific capacity) were increased by the application of the high-pressure air impulse technique. The well loss change values also indicate an increase in the hydraulic parameters by the air impulse implementation. Thus, the high-pressure air impulse technique can be efficiently and economically applied to water and riverbank filtration wells for rehabilitating the decreased productivity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.503-509
• /
• 2021

Objectives: The utility of the system was analyzed by applying the smart safety technology system to the aging pipe rehabilitation facility construction classified as a confined space. Methods: Smart safety management system was applied to a site where the aging pipe rehabilitation work was in progress. The working environment was measured for 25 days, and the toxic gas saturation was analyzed according to the working time and working place. Results: Based on the measured results, two characteristic environmental changes in the confined space were confirmed. First, when working inside an aging pipe, the tendency of carbon dioxide saturation increases with working time and the number of workers. Second, oxygen decreases when working in a space away from the entrance. Conclusions: Various applications of smart safety technology have been confirmed based on the measured data, and this is expected to be useful for environmental characteristic analysis and safety management when applied to a confined space composed with various conditions in the future.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.218-223
• /
• 2009

During the process of excavation for substructures of buildings, precise and constant measurements of retaining wall displacement is crucial for construction to be complete and safe. Currently an inclinometer is used to measure displacement around the perimeter of an excavation site. The existing inclinometer system requires an instrument to be placed inside pre-bored holes for each measurement with an typical interval of two weeks. This makes it difficult to obtain continuous displacement data, especially during a critical time such as rainy season in summer. Also, the existing inclinometer is placed at certain distance away from the retaining wall system itself. Thus, exact measurement of retaining wall movement is compromised because of the distance between the retaining wall and the inclinometer. This paper presents the development of wireless inclinometer system for the displacement measurement of retaining walls by being attached directly to the retaining wall. The result of the application of the developed systems are provided with advanced ubiquitous sensor network (USN) system features. The USN technique incorporated into the system enables users to monitor movement data from wherever possible and convenient such as construction manager's office on site or any other places connected through internet. The research work presented in this paper will provide a basis to save construction time and cost by preventing safe-related unexpected delay of construction due to the failure or collapse of retaining walls.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.81-82
• /
• 2023

Since the COVID-19 pandemic, the importance of remote work has been emphasized, and new digital technologies are rapidly being developed. One such digital technology is the metaverse, which combines reality and virtual space to create an expanded digital world. The metaverse can provide online collaborative spaces that visualize and transmit information and data in real-time. When applied to construction sites, this technology is expected to enable more efficient and stable project management. However, research on construction metaverses, both domestically and internationally, is still inadequate. In this study, 16 influential factors for promoting the application of metaverses to the construction industry were identified through the initial stages of the system dynamics technique. These performance factors were classified into four categories: systemrelated factors for metaverse site construction, device-related factors, user-related factors, and construction site-related factors. It is expected that this study will promote research on the activation of Con-Metaverse by developing casual loop diagrams(CLD) to identify the relationship between each performance factor and constructing stock & flow diagrams(SFD) for simulations in future studies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.281-282
• /
• 2012

Construction performance and productivity improvement are key focus areas in construction industry for any nation. There have been frequent delays and cost overruns in construction projects and poor productivity is one of the major contributions. For this reasons, there have been many research studies performed on the improvement of construction productivity for several decades. However, measuring productivity on a construction job site is still not an easy work. Because collecting reliable data consistently from the job site requires a lot of personnel efforts causing extra time and cost. This paper provides a basic study on the application of image processing technology for measuring unit productivity. It presented the possibility of unit productivity measurement by image processing technology through case study.

• 기술발표회
• /
• s.2006
• /
• pp.54-65
• /
• 2006

Since timbering of a cut in association with underground excavtion work is introduced to domestic, in spite of limitation of special quality in this method, time change, variety of construction, Strut Method is still considered with general methods. Experts have developed methods which is improved in limitation of special quality by continuous studies of normal strut method in basic, and it has been applied to construction site Consequently, this study introduced improved Strut Method to help experts when they select resonable methods with regard to construction site, conditions

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.24-41
• /
• 2007

In this paper several recent case studies of near surface geophysical applications in Greece are presented. The case studies are focused mostly in archeological site investigation, a field which is of high interest in Greece due to its reach historical heritage. The growing construction works in several parts of Greece as well as the increasing public interest in exploring and preserving cultural heritage lead to an increase of the application of nearsurface geophysics techniques as a preliminary investigation tool prior to engineering and archeological excavation works. Research efforts, presented in this work, are focused to extending and adapting standard nearsurface techniques in order to be made more effective for archaeological site investigation. The presented case studies involve not only standard field investigation procedures but also novel approaches such as the use of non-spike electrodes, efficient measuring and instrumentation strategies, unusual configurations and measurement environments. Overall it shown that efficient and state-of-art nearsurface geophysical techniques used for archaeological prospection purposes provide significant archaeological and structural information valuable for archeologists, engineers and conservation scientists.