• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.379-379
• /
• 2022

기후변화로 인해 집중호우, 돌발 홍수 및 태풍의 규모가 대형화되고 있고, 이에 따른 수재해 피해 사례도 증가하는 추세이다. 특히 건설 현장 중 굴착공사 현장에서의 침수로 인한 사고는 인명피해로 이어질 가능성이 더 크기 때문에 더욱 주의가 필요하다. 하지만 현재 국내에서 실질적으로 굴착현장에 적용하기 위한 침수 대응 예측 시스템 및 구체적인 침수 예경보 체계, 기준, 매뉴얼은 존재하지 않는 실정이다. 따라서 본 연구에서는 굴착공사현장의 수재해 예방을 위한 침수 예·경보 시스템의 적용방안을 제시하였다. 또한 경제적이고 효과적인 측면을 고려하여, 공사현장 규모에 따라 적용하는 침수 예·경보 시스템을 이분화하여 소규모 공사현장에는 Track A, 대규모 공사현장에는 Track B 침수 예·경보 시스템을 적용하도록 제안하였다. 이러한 이유는 소규모 공사현장의 특성상 전체 공사비가 작고 운영되는 장비와 인력이 제한적이므로 침수 예·경보에 필요한 비용과 인력 투입이 어려울 수 있기 때문이며, 또한 대피가 필요한 전체 인원이 대규모 현장에 비해서는 적기 때문에 비교적 신속하고 원활한 대피가 가능할 것이라고 판단하였기 때문이다. 본 연구에서는 각 시스템별 적절하다고 판단되는 예·경보 기준을 제시하였다. Track A에서는 강우법에 의한 최소한의 경보시스템으로 필요한 안전목표를 달성할 수 있도록 고려하였고, Track B에서는 현장인원 대부분이 성인 남성임을 고려하여, 성인 남성의 부상을 유발할 수 있는 수심(H)과 유속(V)의 곱을 척도로 하는 한계 H·V곡선을 기준으로 운영되는 경보시스템을 제안하였다.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.124-130
• /
• 2023

The increase in the number of fatal electric accidents over the years has escalated the demand for specialized forensic engineers to determine their relevant technical causes. Likewise, the complexities associated with identifying the causes of electrocution accidents have prompted the General Department of Forensic Science and Criminology at Dubai Police to adopt a new methodology to diagnose electrocution accidents, consisting of an approach that involves medico-legal examination, electrical diagnosis of the evidence, and trace evidence analysis. This paper will discuss the application of the adopted method in further detail by unfolding two case reports. The first report outlines a case in which a worker got electrocuted at a construction site while attempting to turn on a lamp. The second case report involves the death of a technician in a workshop after trying to disconnect a washing machine from its plug. The methodology was utilized during the investigation of both cases, which were attended by the appointed forensic engineers and showed promising results.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.196-203
• /
• 2022

The resource constrained scheduling problem (RCSP) constitutes one of the most challenging problems in Project Management, as it combines multiple parameters, contradicting objectives (project completion within certain deadlines, resource allocation within resource availability margins and with reduced fluctuations), strict constraints (precedence constraints between activities), while its complexity grows with the increase in the number of activities being executed. Due to the large solution space size, this work investigates the application of Genetic Algorithms to approximate the optimal resource alolocation and obtain optimal trade-offs between different project goals. This analysis uses the cost of exceeding the daily resource availability, the cost from the day-by-day resource movement in and out of the site and the cost for using resources day-by-day, to form the objective cost function. The model is applied in different case studies: 1 project consisting of 10 activities, 4 repetitive projects consisting of 40 activities in total and 16 repetitive projects consisting of 160 activities in total, in order to evaluate the effectiveness of the algorithm in different-size solution spaces and under alternative optimization criteria by examining the quality of the solution and the required computational time. The case studies 2 & 3 have been developed by building upon the recurrence of the unit/sub-project (10 activities), meaning that the initial problem is multiplied four and sixteen times respectively. The evaluation results indicate that the proposed model can efficiently provide reliable solutions with respect to the individual goals assigned in every case study regardless of the project scale.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.639-640
• /
• 2015

Traditional construction planning based on historical data and heuristic adjustment can no longer incorporate all the operational details and guarantee the expected performance. The variation between the expected and the actual production leads to cost overruns or delay. Although predicting reliable productivity on construction site is getting more important, the difficulty of this increases. In this regard, this paper suggested to develop BIM-integrated simulation framework. This framework could predict productivity dynamics by considering factors affecting on construction productivity at operational phase. We developed the following processes; 1) enabling a BIM model to produce input data for simulation; 2) developing the construction operation simulation; 3) running simulation using BIM data and obtaining productivity results. The BIM-integrated simulation framework was tested with structural steel erection model because steel erection work is one of the most critical process influencing on the whole construction budget and duration. We could improve to predict more dynamic productivity from this framework, and this reliable productivity helps construction managers to optimize resource allocation, increase schedule reliability, save storage cost, and reduce material loss.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.517-520
• /
• 2013

In construction operation, the temporary structure is used to support designed facilities or to provide work spaces for construction activities. Since the structure is used only during the construction operation, the operation may be given insufficient attention. The contractor is likely to try to save cost on the material and labor cost. This contractor's behavior frequently leads to construction accidents. In order to prevent accidents from the failure, the operation should be carefully monitored for identifying the effect of dynamics in the surrounding site area. Otherwise, any unexpected adversary effect could result in a very costly construction failure. This study presents the feasibility of the ubiquitous sensor network (USN) technology in collecting construction data during the construction operation of earth retaining walls. The study is based on the result at the Construction System Integration Laboratory (CSIL) at the Pusan National University. A USN-based system has been developed for monitoring the behavior of the temporary structure of earth retaining walls. The data collected from the sensors were used to understand the behavior of the temporary structure. The result of this study will be used in increasing the safety during the construction operation of retaining walls.

• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.261-281
• /
• 2023

Magnetic flux sensors are commonly used in monitoring the cable force, but the application of the sensors in large diameter non-closed Galfan cables, as those adopted in Yueqing Gymnasium which is located in Yueqing City, Zhejiang Province, China and is the largest span hybrid space structure in the world, is seldom done in engineering. Based on the construction of Yueqing Gymnasium, this paper studies the cable tension monitoring using the magnetic flux method across two stages, namely, the pre-calibration stage before the cable leaves the rigging factory and the field tension formation stage of the cable system. In the pre-calibration stage in the cable factory, a series of 1:1 full-scale comparative tests were carried out to study the feasibility and relability of this kind of monitoring method, and the influence on the monitoring results of charging and discharging voltage, sensor location, cable diameter and fitting method were also studied. Some meaningful conclusions were obtained. On this basis, the real-time cable tension monitoring system of the structure based on the magnetic flux method is established. During the construction process, the monitoring results of the cables are in good agreement with the data of the on-site pressure gauge.The work of this paper will provide a useful reference for cable force monitoring in the construction process of long-span spatial structures.

• Smart Media Journal
• /
• v.13 no.3
• /
• pp.62-73
• /
• 2024

This research, conducted over a three-year period starting from 2020, was a collaborative project between practitioners in the field of VE design and the Korea Expressway Corporation, aimed at innovating the design VE project to construct an intelligent ICT-based smart highway and enhancing highway driving performance and customer satisfaction. The research included R&D support for payment and management systems integrated with IOT technology, the application of the developed prototype at highway sites, and analysis of user performance evaluation. Based on the Innovation Work Roadmap of the Korea Expressway Corporation, the research process involved collaboration between a public participation group and an expert group, considering the technical feasibility of data-based ICT technology through the National Idea VE Contest. The final VE design results were implemented at the Seongnam tollgate site with budget support from relevant departments, followed by a satisfaction survey. It is expected that the continuous contributions to achieving an ESG society, such as the increase in the number of customers using the tolling zone equipped with smart upgrades, along with their satisfaction rate, and the reduction in carbon emissions and total settlement time of highway users, will be sustained.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.335-340
• /
• 2010

Urethane resin applicable for the first transcription of historical site and transcription of soil layer were synthesized in order to replace the imported urethane resin, NS-10. Comparing to the NS-10, the urethane polymers showed similar penetration to wet soil and formed a stable layer of polyurethane during progress working the peeling off the polyurethane pre-product from epoxy surface of final product. The urethane resins used for the first transcription of historical site improved tensile strength, which is consistent with that of NS-10. In addition the urethane resin for transcription of soil layer was supplied with hardness that have a also same strong point as like NS-10. This property is advantage due to simplifying the transcription work of soil layer in backward. When we tested to the real ground soil as well as experimentation compressed soil with use these synthesis urethane resin, we ca get the satisfying result in penetration property and stability and these properties evaluated the resins as an advanced product serving better convenience for worker.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.11-22
• /
• 2009

Recently the integration and development of ST(Spatial Technology) and forest geographic information have been used very efficiently for the forest administration. However, even though many application system related to forest information have been developed and improved, there are still paper based inventories management and hand work for data construction and upgrade. In this study the forest information warehouse, which is mapped and managed at work-site operations, was constructed based GIS technology so that the standardization and consistency of current data could be acquired in real time. In addition, these thematic maps were conducted on high resolution satellite images and managed in web based forest information data warehouse form and finally shared through Internet for the very first-line administration officials. This study shows that the forest information standardization service of municipal governments very first time in the Korea and provides the unified decision making support and enterprise formed forest database so that is expected to be the very successful sample to suggest the prototype of national forest spatial data infrastructure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.