• International Journal of Quality Innovation
• /
• v.6 no.3
• /
• pp.70-94
• /
• 2005

The IC packaging industry heavily relies on shop floor information, necessitating the development of a model to flexibly define shop floor information and timely handle manufacturing data. This study presents a novel data model of product manufacturing flow to define shop floor information to effectively respond to accelerated developments in IC package industry. The proposed data model consists of four modules: operation template setup, general process setup, enhanced bill of manufacture (EBOMfr) setup, and work-order process setup. The data model can flexibly define the required shop floor information and decision rules for shop floor product manufacturing flow, allowing one to easily adopt changes of the product and on the shop floor. However, to handle floor dynamics of the IC packaging industry, this work also proposes a WIP (i.e. work-in-process) system for monitoring and controlling the product manufacturing flow on the shop floor. The WIP system integrates the data model with a WIP execution module. Furthermore, an illustrative example, the MIRL WIP System, developed by Mechanical Industrial Research Laboratories of Industrial Technology Research Institute, demonstrates the effectiveness of the proposed model.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.6-11
• /
• 1992

This study was carried out to investigate exposure level, size distribution, and respirable mass fraction of airborne coal dust and heavy metal concentration of respirable coal dust at each work site in coal briquet factory from July 1991 to September 1991. Geometric mean of total dust concentration was 10.88mg/m$^{3}$ at storage shop, 8.22mg/m$^{3}$ at pulverize shop, and 3.79mg/m$^{3}$ at rotary press shop, respectively, but those at storage and pulverize shop were higher than TLV. Geometric mean of respirable coal dust concentration wat 1.03mg/m$^{3}$ at storage shop, 0.78mg/m$^{3}$ at pulverize shop, and 0.55mg/m$^{3}$ at rotary press shop, respectively, which were lower than TLV Aerodynamic 50% cutoff diameter of the suspended coal dust was 5$\mu$m at rotary press shop and 6.8$\mu$m at storage shop, ranged to thoracic particulate defined by ACGIH, and deposited in the region of repiratory system. The mass fraction rate of respirable dust to the total coal dust was 26.2% at rotary press shop, 18.8% at storage shop, and 13.8% at pulverize shop, respectively. Heavy metal concentrations of the respirable coal dust were 0.028mg/m$^{3}$ ib Fe, 0.0081mg/m$^{3}$ in Cu, and 0.0039mg/m$^{3}$ in Pb.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.97-98
• /
• 2006

This study proposes a method of generating steel house shop drawing in an automated design method, reducing construction manpower and period. With one hour fire-resistant approval code, reflecting work ability and efficiency, steel-framed house market is expected to extend from one or two story house to multi-purpose facilities up to four story height. More models have been constructed in this system than the first appearance of fire-resistant approval in Korea in 1997 Also, cost estimation of components such as frame walls, roof trusses and floors is obtained with shop drawings. Also, the lack of suppliers of steel framed house shop drawing and unstandardized drawing method get constructors have difficulty in understanding its design. In steel framed house industry, shop drawings are essential part in building and constructing framework and they have major effects on construction deadlines and expenses. By exploring method of shop drawing automation, this study aims to optimize work flow with a standardized drawing method. The proposed system can be applied to manufacturing automation in domestic industry of factory-built panelizing method in the near future.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.103-106
• /
• 2006

This study proposes a method of generating steel house shop drawing in an automated design method, reducing construction manpower and period. With one hour fire-resistant approval code, reflecting work ability and efficiency, steel-framed house market is expected to extend from one or two story house to multi-purpose facilities up to four story height. More models have been constructed in this system than the first appearance of fire-resistant approval in Korea in 1997. Also, cost estimation of components such as frame walls, roof trusses and floors is obtained with shop drawings. Also, the lack of suppliers of steel framed house shop drawing and unstandardized drawing method get constructors have difficulty in understanding its design. In steel framed house industry, shop drawings are essential part in building and constructing framework and they have major effects on construction deadlines and expenses. By exploring method of shop drawing automation, this study aims to optimize work flow with a standardized drawing method. The proposed system can be applied to manufacturing automation in domestic industry of factory-built panelizing method in the near future.

• Electric Engineers Magazine
• /
• s.323
• /
• pp.12-13
• /
• 2009

협회는 임원 지회장 대의원의 친교와 단합을 도모하고, 참여의식을 제고함은 물론 협회의 리더그룹으로서의 책임의식과 봉사정신을 드높이기 위해 2009. 6. 5(금)$\sim$6(토) [1박 2일간] 속리산 유스타운에서 "전국 대의원[임원 지회장 대의원] Work-Shop"을 개최함.

• LP가스
• /
• v.22 no.4
• /
• pp.40-41
• /
• 2010

지난 7.22~23 제주 풍림리조트에서 지식경제부, 한국가스안전공사, 한국LP가스공업협회, 한국LP가스판매협회, 수입사 관계자 등과 LP가스소형용기시범 사업자 16명 등 총 40여명이 참석한 가운데 'LP가스소형용기직판 시범사업 Work Shop'이 개최됐다. 관련 내용을 요약 정리하여 게재한다.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.84-92
• /
• 2008

Scheduling is one of the most important issues in the planning and operation of production systems. This paper investigates a general job shop scheduling problem with reentrant work flows and sequence dependent setup times. The disjunctive graph representation is used to capture the interactions between machines in job shop. Based on this representation, four two-phase heuristic procedures are proposed to obtain near optimal solutions for this problem. The obtained solutions in the first phase are substantially improved by reversing the direction of some critical disjunctive arcs of the graph in the second phase. A comparative study is conducted to examine the performance of these proposed algorithms.

• Journal of Fashion Business
• /
• v.22 no.5
• /
• pp.83-95
• /
• 2018

As the paradigm of fashion retail industry moves rapidly to the multi-channel, the role of shop master has changed as well. Therefore, the purpose of this study is to examine in-depth the changing role of shop masters in multi-channel retail paradigms. In-depth interviews were conducted, and all interviews were recorded with permission. Seven shop masters participated in in-depth interviews. All of them were sales specialists, with more than 10 years working experience, at department stores. Results of this study are as follow: First, the roles of a multi-channel shop master include store management, management of sales associates, customer relationship management, and management in relation to the headquarters and suppliers. Second, the most important competencies of shop masters are to forecast future demand, establish information networks, communicate well with others, and create a work environment resulting in higher productivity.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.73-87
• /
• 1999

Order Review/Release (ORR) System is the linkage between planning system and actual production. Reduction of the waiting time on the machines, work in process and lead time variation may be achieved by adopting ORR strategies. But researchers on the ORR do not agree on the effectiveness of ORR. Some say that the overall system flow time may be increased if ORR is adopted, but others say that ORR can reduce work in process, flow time and variation of flow time. The objective of this research is to clarify under what environments order release strategy is effective. Simulation study was conducted in a hypothetical job shop. The experimental results show that dispatching rule is much more important than ORR is in controlling the shop floor. But the results indicate that ORR can reduce mean shop flow time, average work in process and variation of shop flow time under such environments where utilization level is high and planned order is weekly released to the order pool. And the results also show that the effect of plan smoothing on the ORR is insignificant, which is inconsistent with the results of the previous researches.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.74-92
• /
• 2006

This study aims at revitalization of industrial consignment education and focuses on the development of preferred subjects and teaching methods. The survey was administered to six hundred workers for the local fashion distribution companies for two years between through interview and questionnaire with 13 questions: 3 of them about favorite subjects, 7 about teaching methods, and the rest about whether or not they want to enter a college as well as which certificates and which kinds of job they want to have. The results of the survey can be summarized as follows. 1 The respondents in 2005 who answered to the questions about fashion design and other major subjects show that they preferred the subjects on fashion design to the subject of make-up and that they were interested in the photo-shop subject while they were less interested in the fashion marketing subject. 2 In order to apply what they learn to their own work field, the respondents want practical-work oriented lectures rather than theory centered ones. It means the new teaching program needs the teaching staffs who have had some practical work experiences and majored in the same subjects as the respondents prefer to learn. So it is necessary to take it into consideration that the development of new curriculums should focus on the subjects of practical skill and the experiences of actual work fields. 3 The certificate of 'shop-master' qualification is considered as the most interesting and necessary thing for their job. The respondents show that they are most concerned in a shop-master, manager of a department at department stores related to fashion distribution companies. Therefore, it points out the intensive teaching program for getting the qualification of shop-master is a must in the industrial consignment education.