• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.6 s.261
• /
• pp.514-521
• /
• 2007

This study focused on the effects of the $CO_2$ gas concentration in fresh charge and induction air temperature on the combustion characteristics of homogeneous charge compression ignition with dimethyl ether (DME) fuel, which was injected at the intake port. Because of adding $CO_2$ in fresh charge, start of auto-ignition was retarded and bum duration became longer. Indicated combustion efficiency and exhaust gas emission were found to be worse due to the incomplete combustion. Partial burn was observed at the high concentration of $CO_2$ in fresh charge with low temperature of induction air. However, indicated thermal efficiency was improved due to increased expansion work by late ignition and prolonged bum duration. Start of auto-ignition timing was advanced with negligible change of burn duration, as induction air temperature increased. Burn duration was mainly affected by oxygen mole concentration in induction mixture. Bum duration was increased, as oxygen mole concentration was decreased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.193-198
• /
• 2009

It is an important issue in cost management to contract with the standard of cost estimate by the reasonable way in public construction projects. For the standard of cost estimate based on the Standard Estimating System, there is a difference of labor inputs between Standard Estimating System and actual quantities in construction projects. The duration of form work in multi-family housing depends on the manpower compared with other work, which is the critical path on the schedule management to be decided quality, and is the important to the cost management of construction projects. This study presented a simulation model of the productivity analysis for selecting the standard work type of form work in Multi-family housing construction projects.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.213-221
• /
• 2022

Defects are the risk factors in the construction process of buildings. They cause damage, delaying the construction duration. They especially cause adverse effects on the top-down construction method. This study analyzed the degree of construction delay induced by each work type, focusing on defects in the top-down method. Then, we derived construction delay induction coefficient from different work types in order by using the severity of construction delay per defect and the occurrence probability of defect; this assessment model measures the impact of defects on construction delay for each work type. Furthermore, by comparing each work type based on the defect frequency and the construction delay induction coefficient, we found work types that need to be administered attentively. We identified that plastering work was easy to overlook, requiring caution in defect management. This study provides an efficient defect management system suitable for the buildings that are built using the top-down construction method.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.4 s.63
• /
• pp.708-718
• /
• 1998

To investigate the effect of smoking and drinking habit on the health status in lead using industries, 2,785 male workers in lead using industries (7 storage battery industries, 7 secondary smelting and related industries, and 4 primary metal and other manufacturing industries) were selected for this study. This study was carried out as a part of periodic health examination. Selected study variables were zinc protoporphyrin in whole blood (ZPP), SGOT and SGPT for laboratory test. Questionnaire for lead related symptoms and smoking and drinking habit was provided to all the workers and filled up by themselves and reconfirmed by physician. The results obtained were as follows; 1. The overall smoking and drinking rate of study population were 69.8% and 73.6%, respectively. While the smoking and drinking rate of storage battery workers were 68.8% and 72.3%, those of secondary smelting industries and other industries were 66.0% & 66.4% and 74.6 & 80.3% respectively. 2. While the mean values of blood ZPP of lead exposed workers were significantly higher than other group, those of SGOT of storage battery workers were significant higher than other worker. But there were no differences of mean values of other variables. 3. Smoking habit did not affect on the mean value of blood ZPP of workers in special health examination group, but there were significant differences of blood ZPP and SGOT between drinker and non-drinker. 4. Symptom prevalence of lead exposure were higher in drinking and smoking group than non-drinking and non-smoking group. 5. In multiple regression analysis of the total lead related symptoms, blood ZPP, SGOT, and SGPT as dependent variable, respectively, and age, work duration, blood ZPP, pack year and amount of alcohol drinking as independent variables, work duration, pack year, amount of alcohol drinking, age contributed to total symptoms; and age, work duration, pack year contributed to blood ZPP; and age, amount of alcohol drinking, work duration contributed to SGOT; and pack year contributed to SGPT.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.6 s.22
• /
• pp.170-178
• /
• 2004

Public construction companies have strictly followed a rule that they should not work in the wet area such as structural frame for a certain period during the winter season. It is usually known that the non-working period during the winter causes increase of the project duration, and the project cost escalation. Also, it makes negative effects on national economy because it reduces workers income. Therefore, the site work for the structural frame should be performed even during the whiter season. But the site work for the structural frame during that period cannot proceeds in the same way as during other periods, and requires a different method for estimating project duration. Through an analysis of time scheduling mechanism, actual working days are obtained for 1 cycle of typical floors in the structural frame during these periods, and non-working days of 5 years average are calculated based on calendar day using data of 5 years weather forecasts for that season. This study proposes an optimized way of estimating project duration for 1 cycle of typical floors in the structural frame during these periods. This estimating method uses the combined actual working days and non-working days of 5 years' average, and the estimated results are confirmed by being compared with field data. This study is expected to be used in estimating the construction duration of the structural frame during the winter season.

• Research in Community and Public Health Nursing
• /
• v.7 no.2
• /
• pp.400-409
• /
• 1996

To investigate industrial fatigue and low back pain, the questionaire survey for subjective symptoms of fatigue and low back pain was carried out among 591 male workers aged 20-55 employed in an automobile industry in Korea. Workers participated to this study were divided into low back pain group(LBP) and control group, according to the self-reports by written questionaires. The subjective sysptoms of fatigue comprised three groups of 10 items each, representing dullness and sleepiness(level of cerebral activation), difficulty in concentration(level of motivation) and bodily projection of fatigue. The resultant data were processed for $\chi^2-test$, t-test and a pearson's correlation coefficient to confirm the relationships. The results were as follows: 1. 30 items of fatigue subjective symptoms exeptone item, 'lack in perseverance', were directly associated with low back pain. 2. The percentage of fatigue complaint were sig nificantly higher in LBP group. 3. Of the 30 items of fatigue subjective symptoms, the highest percentage was accounted for 'eye strain'(27.9%), followed by 'whole body feels tired' and 'legs feel heavy'(22.9%), 'feel like lying'(21.4%), 'feel a pain in the low back'(18.7%), 'feel drowsy'(16.4%) and 'feel stiffness in the neck or the shoulders'(16.2%) in the order of sequence. 4. The average weighted score for the first group of fatigue items(dullness and sleepiness) was the largest among three groups and was followed by the second group(difficulty in concentration) and the third group(bodily projection of fatigue) in the order of sequence, suggesting the heavier shift work stress of the workers. 5. In the groups of the aged 30-40, work duration of 5-7yrs, heavy work amount and irregular work speed, significant high fatigue complaints were revealed in terms of eye strain, whole body feels tired, legs feel heavy, feel like lying, feel a pain in the low back and feel stiffness in the neck or the shoulders. 6. A significant negative correlations were shown between age, work duration and eleven subjective symptoms while positive reciprocal correlations were shown between eleven items with one another.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.114-123
• /
• 2005

We analyzed the demographic and job features of 197 shipyard workers with work-related musculoskeletal disorders(WMSDs) compensated by the Industrial Accident Compensation Insurance Act, and the features of the disorders, the causes of operation and the induced behaviors. The three shipbuilding companies surveyed were located in Busan Metropolitan city and Gyungsangnam-do. The results were as follows. 1. The ages of WMSDs patients in shipyard were $43.6{\pm}8.6$ and the job tenure was $14.3{\pm}5.6$. The 40's of them was 40.1%, and the 30's was 29.4%. Patients less than 5 year-work duration were 85.3%, and ones more than 16 year-work duration 6.6%. In occupations, welders were 32.5%, pre-welders 17.3%, and setting engineers 6.6%. 2. The causes of WMSDs in shipyard were works(95.4%) and outer crash or accident shock (3.6%). Based on the standard of the NIOSH induced behaviors, the causes were awkward posture (62.9%), excessive movement(19.3%) and repetitive movement(13.7%). 3. The compensated WMSDs by body part was the highest, 36%, in the spines, 32.0% in both the upper limbs and the spines, and 14% in the upper limbs. The number of cases of WMSDs in body were 96 in the cervical, 79 in the lumbar and 72 in the shoulders. 4. As a result of chi-square test(${\chi}^2$) between diagnosis and operation in body, welding and spot welding had the most diagnoses in all parts of the body among other occupations. Chi-square test(${\chi}^2$) between diagnosis and induced behavior in body showed that awkward postures recorded the highest rate and repetitive movements was the second. 5. The most hazardous occupation was the welding(incidence rate=9.7) and the most hazardous behavior was the awkward posture.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.66-70
• /
• 2023

Background: Online teaching and learning extend the duration of using gadgets such as mobile phones and tablets. A prolonged usage of these gadgets in a static position can lead to musculoskeletal disorders (MSD). Therefore, this study aims to identify the risk factors related to musculoskeletal symptoms while using gadgets during work from home due to the COVID-19 pandemic. Method: A cross-sectional survey with online-based questionnaires was collected from the University of Indonesia, consisting of lecturers, students, and managerial staff. The minimum number of respondents was 1,080 and was defined by stratified random sampling. Furthermore, the dependent variable was musculoskeletal symptoms, while the independent were age, gender, job position, duration, activity when using gadgets, and how to hold them. Result: Most of the respondents had mobile phones but only 16% had tablets. Furthermore, about 56.7% have used a mobile phone for more than 10 years, while about 89.7% have used a tablet for less than 10 years. A multivariate analysis found factors that were significantly associated with MSD symptoms while using a mobile phone, such as age, gender, web browsing activity, work, or college activities. These activities include doing assignments and holding the phone with two hands with two thumbs actively operating. The factors that were significantly associated with MSD symptoms when using tablets were gender, academic position, social media activity, and placing the tablet on a table with two actively working index fingers. Conclusion: Therefore, from the results of this study it is necessary to have WFH and e-learning policies to reduce MSD symptoms and enhance productivity at work.

• Structural Engineering and Mechanics
• /
• v.73 no.2
• /
• pp.181-190
• /
• 2020

In this paper, non-linear dynamic buckling behaviour of laminated composite curved panels subjected to dynamic in-plane axial compressive loads is studied using finite element methods. The work is carried out using the finite element software ABAQUS. The curved panels are modelled with S4R element and the nonlinear dynamic equilibrium equations are solved using the ABAQUS/Explicit algorithm. The effect of aspect ratio, radius of curvature and thickness are studied. The importance of orientation of plies in the direction of loading is also reiterated in this study. Vol'mir's criterion is used to calculate the dynamic buckling loads. The panels are subjected to rectangular pulse load of various amplitude and durations and the responses are observed. For particular loading amplitude, a critical value of loading duration is observed beyond which the variation of dynamic buckling load is insignificant. It is also observed that, the value of dynamic bucking load reduces as the loading duration is increased though the reduction is not much after a particular loading duration.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.6 no.9
• /
• pp.7-18
• /
• 1983

In this paper, I have approached the problem of scheduling that can be reasonably cost down and duration down in the tenement house by using PERT/CPM technics. The tenement house of 'M' construction company consistute 78 element workings in total. I made out the net-work scheduling through 78 element workings, after calculating by computer, G-COS 101, I reduced the duration and cost by MCX, and then enforced from the least cost slope to six times. Resulty, I attained PERT/CPM scheduling for construction scheduling ; a) Make Possible the effectiveness budgeting control b) How the scientific materials c) Make possible the reasonably decision making d) Strengthen the material control by relevance of element workings e) Make possible the duration down through the least cost.