• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2017

Defect dispute in apartment building has become a debating social issue. The system of defect lawsuit and the conciliation process are applicable to solve defect problems in South Korea. Among various defects, painting work defect is a critical issue because it requires large area works and entails a lot of cost. Accordingly, disputes on work procedure and cost calculation are argued oftenly between residents and housing providers. This study reviewed detailed main issues of painting work and propose relevant systems and standards. In this analysis, the main issues are categorized into pre-works, main work, and others. The most recent cases are compared and analyzed for each issue. After the analysis, following conclusions are obtained, (1) In defect lawsuit system, even though surface treatment work in pre-work step is part of main work, it has been separated and regarded as a separate work. (2) Although the main painting work are not significantly different from two systems, it is still necessary to achieve a consensus to close the gap in the methodology of painting area calculation and determining whole painting or partial painting. (3) In addition, unlike the profit rate of general construction works, that of painting work remained the maximum rate and additional charge rate for works carried out in higher place are different among cases. Therefore, it is determined that establishing consistent standards is urgent.

• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.6-11
• /
• 2016

Background: A permit to work (PTW) is a formal written system to control certain types of work which are identified as potentially hazardous. However, human error in PTW processes can lead to an accident. Methods: This cross-sectional, descriptive study was conducted to estimate the probability of human errors in PTWprocesses in a chemical plant in Iran. In the first stage, through interviewing the personnel and studying the procedure in the plant, the PTW process was analyzed using the hierarchical task analysis technique. In doing so, PTWwas considered as a goal and detailed tasks to achieve the goal were analyzed. In the next step, the standardized plant analysis risk-human (SPAR-H) reliability analysis method was applied for estimation of human error probability. Results: The mean probability of human error in the PTW system was estimated to be 0.11. The highest probability of human error in the PTW process was related to flammable gas testing (50.7%). Conclusion: The SPAR-H method applied in this study could analyze and quantify the potential human errors and extract the required measures for reducing the error probabilities in PTW system. Some suggestions to reduce the likelihood of errors, especially in the field of modifying the performance shaping factors and dependencies among tasks are provided.

• Culinary science and hospitality research
• /
• v.14 no.4
• /
• pp.339-356
• /
• 2008

The purpose of this study is to provide the developmental basic data of a change in shift work types by making a self-administered survey of the effect of commitment by shift work and the open kitchen system on job satisfaction and job stress, and mutual relation between variables on 287 cooks in luxury hotels. Analysis showed that the operation of the shift work system was effective in reducing the internal stress of the cooks, their external stress, or their self-uncertainty on the job, and the business by the open kitchen system was effective in raising self-esteem. In addition, job commitment by shift work and the open kitchen system were effective in promoting the job satisfaction of employees, interpersonal relations, promotion, benefits and wages. Consequently, the decrease of external and internal stress or self-uncertainty and the improvement of job satisfaction can be connected with the increase of productivity or cost reduction. Therefore, the open kitchen system should be properly applied to the shift work system, along with sanitation, safety and the periodic checkup of kitchen.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.23-29
• /
• 2012

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as appurtenant works, temporary works, structural works, equipment work, finishing work and etc based on accident examples and investigation on actual condition in plants construction work. In addition, the safety management system was developed to perform risk assessment of plants construction and use it for effective safety training for labor.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.2
• /
• pp.239-245
• /
• 2015

In order to control the hybrid power system efficiently, the knowledge for the required load of the system is important. The agricultural tractor performs various farm works such as plow, rotary, and baler. When it performs rotary tillage and baler operation, the generated work load is analyzed. To analyze trend of work load, moving average technique is applied to the measurement data. Optimal control inputs for the two works are obtained from simulation using the dynamic programming. The novel fundamental control strategy for parallel hybrid tractor called Max. SOC is proposed.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.3
• /
• pp.43-52
• /
• 2005

A two-dimensional posture measurement system was developed to evaluate the risks of work-related musculoskeletal disorders(MSDs) easily on various conditions of work. The posture measurement system is an essential tool to analyze the workload for preventing work-related musculoskeletal disorders. Although several posture measurement systems have been developed for workload assessment, some restrictions in industry still exist because of its difficulty on measuring work postures. In this study, an image recognition algorithm was developed based on a neural network method to measure work posture. Each joint angle of human body was automatically measured from the recognized images through the algorithm, and the measurement system makes it possible to evaluate the risks of work-related musculoskeletal disorders easily on various working conditions. The validation test on upper body postures was carried out to examine the accuracy of the measured joint angle data from the system, and the results showed good measuring performance for each joint angle. The differences between the joint angles measured directly and the angles measured by posture measurement software were not statistically significant. It is expected that the result help to properly estimate physical workload and can be used as a postural analysis system to evaluate the risk of work-related musculoskeletal disorders in industry.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.246-251
• /
• 2005

Accident scenarios analysis is a course to understand, analyze, and describe a process of an accident and behavior pattern of the parties to an accident. The method of accident scenarios is that we described patterns represented between accidents and hazardous conditions, and then provide data to prevent the accident. We have carried out scenarios analysis in various fields so far, but it was not taking account of system. In this research, we made a study on technology of accident scenarios analysis using QFD (Quality Function Deployment) to analyze systematically and evaluate quantitatively types of hazards and scenarios of railway accident. And we analyses accident scenarios of a subject of work-related fatality accident to railway employee and conducted risk assessment for different scenarios. Also we defined relation between unsafe events and hazardous conditions caused to work-related fatality accident, and attempted to quantitatively assess work-related fatality accident and the parties to accidents. The results of this research will be used in analyzing for important causes and contributing factors of work-related fatality accidents at the step of risk assessment of railway system, and quantitatively assessing frequency of work-related accidents and risk.

• Journal of Drive and Control
• /
• v.15 no.2
• /
• pp.22-31
• /
• 2018

This study deals with verifying the design feasibility, of an independently driving hydraulic system for disaster response purposes, through an analytical approach. The development target is a system in which four traveling motors are driven independently, and must be easy to operate even under conditions in which different loads are applied to the traveling motors. In order to be suitable for complex work, the hydraulic system was designed using the main control valve with a pressure compensation function. If we can develop an analytical model that reflects the specifications and functions of the parts through the analysis program, we can verify the validity of the design before we make the prototype. The purpose of this study therefore, is to verify the feasibility of designing an independent drive hydraulic system through the development of an analysis model from the viewpoint of complex work. The analysis program uses Simulation X.

• Journal of Information Technology Services
• /
• v.6 no.2
• /
• pp.35-47
• /
• 2007

The purpose of this thesis is to analyze the success factors of ERP system in corporations and to know what is different in the factors depending on organizational culture and size. Considering there are various results from introduction of the same information technology(IT), it is implied that organizational characteristics make a difference. In this thesis we did factor analysis and multiple regression about the factors based on the previous studies and analyzed the priorities depending on organizational culture and size. The results show that mechanistic organization has key success factors of work process change, project team abilities, and determination of CEO while organic organization has those of work process change and project team abilities. Plus bigger sized organization has success factors of work process change, project team abilities, and determination of CEO while small sized organization has those of work process change and project team abilities.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.4
• /
• pp.67-74
• /
• 2020

As the information age develops, Online education and Non-face-to-face work are becoming common. Telecommuting such as tele-education and video conferencing through the application of information technology is also becoming common due to the COVID-19. Unexpected information leakage can occur online when the company conducts work remotely or holds meetings. A system to authenticate users is needed to reduce information leakage. In this study, there are various ways to authenticate remote access users. By applying burn authentication using a biometric system, a method to identify users is proposed. The method used in the study was studied the main component analysis method, which recognizes several characteristics in facial recognition and processes interrelationships. It proposed a method that can be easily utilized without additional devices by utilizing a camera connected to a computer by authenticating the user using the shape and characteristics of the face by using the PCA method.